13.180 人类工效学 标准查询与下载

ISO/DIS 24505-2:2023 人体工程学 — 无障碍设计 — 创建颜色组合的方法 — 第 2 部分：针对色觉缺陷和视力低下的人

Ergonomics — Accessible design — Method for creating colour combinations — Part 2: For people with colour deficiency and low vision

ISO/CD 24505-2:2023 人体工程学 — 无障碍设计 — 创建颜色组合的方法 — 第 2 部分：针对色觉有缺陷的人和视力低下的人

Ergonomics — Accessible design — Method for creating colour combinations — Part 2: For people with defective colour vision and people with low vision

ISO/CD 9241-112:2023 人机交互的人体工程学 - 第 112 部分：信息呈现的原则

Ergonomics of human-system interaction — Part 112: Principles for the presentation of information

ASTM F2010/F2010M-18(2023) 用改良钉板试验评价手套对佩戴者手指灵活性影响的标准试验方法

1.1 This test method is used for evaluating finger dexterity while wearing gloves. 1.1.1 This test method covers procedures in which the wearer picks up small objects between the thumb and index finger. 1.2 This test method is suitable for evaluating gloves and other forms of hand protection that allow the wearer to pick up small objects between their thumb and index finger. 1.3 This test method does not address all effects of glove use on hand function. Other methods should be considered to evaluate the effects of gloves on grip, tactility, and other hand functions of interest. NOTE 1—This test method may not apply to all glove types or applications. 1.4 The values stated in SI units or in other units shall be regarded separately as standard. The values stated in each system must be used independently of the other, without combining values in any way. 1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.6 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Test Method for Evaluation of Glove Effects on Wearer Finger Dexterity Using a Modified Pegboard Test

ISO/DIS 9241-820:2023 人机交互的人体工程学 第 820 部分：沉浸式环境中交互的人体工程学指导 包括增强现实和虚拟现实

Ergonomics of human-system interaction — Part 820: Ergonomic guidance on interactions in immersive environments including augmented reality, and virtual reality

ISO/CD 14505-1:2023 热环境工效学 车辆热环境评价 第1部分：热应力评估原理和方法

Ergonomics of the thermal environment — Evaluation of thermal environments in vehicles — Part 1: Principles and methods for assessment of thermal stress

ISO/DTR 25555:2023 老龄化社会 家庭医疗保健产品、相关服务和环境的可及性和可用性考虑因素

Ageing societies — Accessibility and usability considerations for home-based healthcare products, related services and environments

ISO/FDIS 24227:2023 从测量医疗保健部门人体运动的各种传感器系统中提取的步行速度验证协议

Validation protocol for walking speed as extracted from various sensor systems that measure human body motion for the healthcare sector

ISO 7933:2023 热环境的人体工程学 使用预测热应变的计算来分析确定和解释热应力

Ergonomics of the thermal environment — Analytical determination and interpretation of heat stress using calculation of the predicted heat strain

ISO/CD 14505-3:2023 热环境工效学 车辆热环境评价 第3部分：人体热舒适性评价

Ergonomics of the thermal environment — Evaluation of thermal environments in vehicles — Part 3: Evaluation of thermal comfort using human subjects

ISO/CD 14505-2:2023 热环境工效学 车辆热环境评价 第2部分：等效温度的确定

Ergonomics of the thermal environment — Evaluation of thermal environments in vehicles — Part 2: Determination of equivalent temperature

ISO/CD 9241-161:2023 人机交互的人体工程学 第 161 部分：视觉用户界面元素指南

Ergonomics of human-system interaction — Part 161: Guidance on visual user-interface elements

23/30438933 DC BS EN ISO 10075-2 与脑力负荷相关的人体工程学原理 第 2 部分：设计原则

BS EN ISO 10075-2. Ergonomic principles related to mental workload - Part 2. Design principles

ISO/DIS 17097:2023 3-D 人体扫描数据 第 1 部分：人体扫描数据处理的术语和方法

3-D human body scan data — Part 1: Terminologies and methodologies for processing of human scan data

CEN ISO/TR 9241-100:2023 人机交互工效学 第100部分：ISO 9241 软件工效学标准概述（ISO/TR 9241-100:2023）

This document provides an overview of ISO 9241 software ergonomic standards in the form of executive summaries of these standards, in particular the parts in the ISO 9241-1XX family of documents. In addition, it provides executive summaries for ISO 9241-11, ISO 9241-210 and ISO 9241-220, which have specific relevance to the design of software-based interactive systems. This document is intended for the following types of users: — managers, who are involved in planning and managing product, system and/or service development projects, who are to be informed on the human-centred design approach and on guidance on software ergonomics; — developers, who will apply the guidance in these documents during the development process (either directly, based on training, or by using tools and style guides which incorporate the guidance); — user interface design roles (including interaction designers, information architects, user interface designers, visual designers and content creators), who will apply the guidance in these documents during the creation and design process (either directly, based on training, or by using tools and style guides which incorporate the guidance); — user researchers, who are responsible for identifying user needs and inform context of use of a product, system or service; — evaluators, who are responsible for ensuring that products, systems or services meet the recommendations contained in these documents; — buyers, who will reference these documents in contracts during product procurement; — designers of user interface development tools and style guides to be used by user interface designers and developers. While the documents are applicable to all types of interactive systems, they do not cover the specifics of every context of use, such as safety critical systems and collaborative work.

Ergonomics of human-system interaction - Part 100: Overview of ISO 9241 software ergonomic standards (ISO/TR 9241-100:2023)

ISO/DTR 7250-4:2023 技术设计的基本人体测量 第 4 部分：熟练人体测量师的预期表现

Basic human body measurements for technological design — Part 4: Expected performance of skilled anthropometrists

ISO/FDIS 9241-221 《人机交互工效学》第221部分：以人为本的设计过程评估模型

Ergonomics of human-system interaction — Part 221: Human-centred design process assessment model

ISO/DTR 7250-2 用于技术设计的基本人体测量 第2部分：来自全国人口的身体测量的统计摘要

Basic human body measurements for technological design — Part 2: Statistical summaries of body measurements from national populations

ISO/DIS 24227 从为医疗保健部门测量人体运动的各种传感器系统中提取的步行速度验证协议

Validation protocol for walking speed as extracted from various sensor systems that measure human body motion for the healthcare sector

ISO/DIS 9241-5 人机交互工效学 第5部分：工作站布局和姿势要求

Ergonomics of human-system interaction — Part 5: Workstation layout and postural requirements