13.220.50 建筑材料和构件的阻燃性 标准查询与下载
共找到 1301 条与 建筑材料和构件的阻燃性 相关的标准，共 87 页
Extended application of test results on durability of self-closing for fire resistance and/or smoke control doorsets and openable windows - Part 3: Durability of self-closing of steel sliding doorsets
- ICS
- 13.220.50
- CCS
- 发布
- 2021-06-01
- 实施
- 2021-06-01
Extended application of test results on durability of self-closing for fire resistance and/or smoke control doorsets and openable windows - Part 5: Durability of self-closing of hinged and pivoted timber doorsets
- ICS
- 13.220.50
- CCS
- 发布
- 2021-06-00
- 实施
This document describes a method of determining the resistance to jet fires of passive fire protection materials and systems. It gives an indication of how passive fire protection materials behave in a jet fire and provides performance data under the specified conditions. It does not include an assessment of other properties of the passive fire protection material such as weathering, ageing, shock resistance, impact or explosion resistance, or smoke production. Complete I-beams and columns cannot be tested to this document due to disruption of the characteristics of the jet.
Determination of the resistance to jet fires of passive fire protection materials - Part 1: General requirements
- ICS
- 13.220.50
- CCS
- 发布
- 2021-06-00
- 实施
This document specifies a test method for the determination of the resistance of fire dampers to heat, and for the evaluation of their ability to prevent fire and smoke from spreading from one fire compartment to another through an air distribution system. This document describes the test requirements related to intumescent fire dampers. It is intended for intumescent fire dampers that are expected to be classified as EI dampers. Without the addition of a mechanical damper, they are unable to achieve the “S” classification, which includes a leakage limit imposed at ambient temperature. This document is not intended to be used for dampers used only in smoke control systems, for testing fire protection devices which only deal with air transfer applications, or for dampers used in suspended ceilings, as the installation of the damper and duct can have an adverse effect on the performance of the suspended ceiling, requiring other methods of evaluation. NOTE "Air transfer" is a low-pressure application through a fire separation door (or wall, floor) without any connection to an air duct.
Fire resistance tests - Fire dampers for air distribution systems - Part 2: Intumescent dampers
- ICS
- 13.220.50
- CCS
- 发布
- 2021-06-00
- 实施
Fire resistance tests for service installations - Part 3: Penetration seals
- ICS
- 13.220.50
- CCS
- 发布
- 2021-06-00
- 实施
BS EN 13501-3. Fire classification of construction products and building elements - Part 3. Classification using data from fire resistance tests on products and elements used in building service installations: fire resistant ventilation ducts…
- ICS
- 13.220.50
- CCS
- 发布
- 2021-05-27
- 实施
- 2021-05-27
Extended application of test results on durability of self-closing for doorsets and openable windows – Part 4: Durability of self-closing of fire resistance and/or smoke control hinged and pivoted metal framed glazed doorsets and openable windows
- ICS
- 13.220.50
- CCS
- 发布
- 2021-05-20
- 实施
- 2021-05-20
Standard Test Method for Determining Flammability Characteristics of Plastics and Other Solid Materials Using Microscale Combustion Calorimetry
- ICS
- 13.220.50
- CCS
- 发布
- 2021-05-01
- 实施
Fire resistance tests for service installations - Part 5: Service ducts and shafts
- ICS
- 13.220.50
- CCS
- 发布
- 2021-05-01
- 实施
- 2021-05-01
This European Standard specifies a method for determining the fire resistance of linear joint seals based on their intended end use. This European Standard is used in conjunction with EN 1363-1.The following tests are included in this European Standard:- no mechanically induced m
Fire resistance tests for service installations - Part 4: Linear joint seals; German version EN 1366-4:2021
- ICS
- 13.220.50
- CCS
- 发布
- 2021-05-01
- 实施
This European Standard specifies a method for determining the fire resistance of horizontal service ducts and vertical service shafts, which pass through walls or floors and enclose pipes and cables. The test examines the behaviour of ducts and shafts exposed to fire from outside
Fire resistance tests for service installations - Part 5: Service ducts and shafts; German version EN 1366-5:2021
- ICS
- 13.220.50
- CCS
- C82
- 发布
- 2021-05-01
- 实施
Extended application of test results on durability of self-closing for fire resistance and/or smoke control doorsets and openable windows - Part 1: Durability of self-closing of hinged and pivoted steel doorsets
- ICS
- 13.220.50
- CCS
- 发布
- 2021-05-00
- 实施
Extended application of test results on durability of self-closing for fire resistance and/or smoke control doorsets and openable windows - Part 3: Durability of self-closing of steel sliding doorsets
- ICS
- 13.220.50
- CCS
- 发布
- 2021-05-00
- 实施
Extended application of test results on durability of self-closing for fire resistance and/or smoke control doorsets and openable windows - Part 2: Durability of self-closing of steel rolling shutters
- ICS
- 13.220.50
- CCS
- 发布
- 2021-05-00
- 实施
Fire classification of construction products and building elements - Part 3: Classification using data from fire resistance tests on products and elements used in building service installations: fire resistant ventilation ducts and fire dampers and or pow
- ICS
- 13.220.50
- CCS
- 发布
- 2021-05-00
- 实施
Extended application of test results on durability of self-closing for doorsets and openable windows - Part 4: Durability of self-closing of fire resistance and/or smoke control hinged and pivoted metal framed glazed doorsets and openable windows
- ICS
- 13.220.50
- CCS
- 发布
- 2021-05-00
- 实施
Fire resistance tests for service installations - Part 4: Linear joint seals
- ICS
- 13.220.50
- CCS
- 发布
- 2021-04-30
- 实施
- 2021-04-30
1.1?This test method, which is similar to thermal analysis techniques, establishes a procedure for determining flammability characteristics of combustible materials such as plastics. 1.2?The test is conducted in a laboratory environment using controlled heating of milligram spe
Standard Test Method for Determining Flammability Characteristics of Plastics and Other Solid Materials Using Microscale Combustion Calorimetry
- ICS
- 13.220.50
- CCS
- 发布
- 2021-04-01
- 实施
1.1 This practice describes procedures for specimen preparation and mounting when testing fenestration profiles to assess flame spread and smoke development as surface burning characteristics using Test Method E84. 1.2 This practice applies to lengths of fenestration profiles only, intended for in-fill no less than 8 in. wide. 1.2.1 This practice does not apply to ancillary materials such as combustible in-fill, reinforcement, hardware, accessories, sealants, or weather-stripping 1.3 This practice presents two ways of testing fenestration profiles; either as profile lengths or as sheets of materials representing the profile. 1.4 Testing shall be conducted with Test Method E84. 1.5 This practice gives instructions on specimen preparation and mounting, but the fire-test-response method is given in Test Method E84. See also Section 1.9 of Test Method E84 for information on operator safety. 1.6 This practice does not provide pass/fail criteria that can be used as a regulatory tool. 1.7 Use the values stated in inch-pound units as the standard in referee decisions. The values in the SI system of units are given in parentheses, for information only; see IEEE/ASTM SI-10 for further details. 1.8 This fire standard cannot be used to provide quantitative measures. 1.9 Fire testing of products and materials is inherently hazardous and adequate safeguards for personnel and property shall be employed in conducting these tests. Fire testing involves hazardous materials, operations and equipment. 1.10 The text of this practice references notes and footnotes which provide explanatory material. These notes and footnotes (excluding those in tables and figures) shall not be considered requirements of the standard. 1.11 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.12 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
Practice for Specimen Preparation of Fenestration Profiles Intended to Support Non-Combustible In-Fill Materials to Assess Surface Burning Characteristics
- ICS
- 13.220.50
- CCS
- 发布
- 2021-04-01
- 实施
Eurocode 9 - Design of aluminium structures - Part 1-2: Structural fire design
- ICS
- 13.220.50
- CCS
- 发布
- 2021-04-01
- 实施
- 2021-04-01
