13.220.50 建筑材料和构件的阻燃性 标准查询与下载

DS/ISO 13784-2:2020 夹层板建筑系统的耐火反应试验 第2部分：大房间的试验方法

Reaction-to-fire tests for sandwich panel building systems – Part 2: Test method for large rooms

PN-EN 13381-10-2020-11 E 确定结构构件耐火性能的试验方法 第10部分：对受拉实心钢筋的应用保护

Test methods for determining the contribution to the fire resistance of structural members -- Part 10: Applied protection to solid steel bars in tension

OENORM EN ISO 1182:2020 产品防火测试反应 不燃性测试（ISO 1182:2020）

Reaction to fire tests for products - Non-combustibility test (ISO 1182:2020)

DIN EN 13381-1:2020 测定结构构件耐火性能的试验方法. 第1部分: 水平保护膜; 德文版 EN 13381-1-2020

This European Standard specifies a test method for determining the ability of a horizontal protective membrane, when used as a fire resistant barrier, to contribute to the fire resistance of standard horizontal structural building members as defined in 6.4.2.Test of horizontal pr

Test methods for determining the contribution to the fire resistance of structural members - Part 1: Horizontal protective membranes; German version EN 13381-1:2020

DIN EN 1366-1:2020 服务设施的耐火试验. 第1部分: 通风管道; 德文版 EN 1366-1-2014+A1-2020

This Part of EN 1366 specifies a method for determining the fire resistance of vertical and horizontal ventilation ducts including those access panels, which are integral part of the tested ducts. The test examines the behaviour of ducts exposed to fire from the outside (duct A)

Fire resistance tests for service installations - Part 1: Ventilation ducts; German version EN 1366-1:2014+A1:2020

DIN EN 15998:2020 建筑物玻璃. 发生火灾的安全性, 耐火性. 用于分类的玻璃试验方法. 德文版本EN 15998-2020

This European Standard specifies the testing methodology to be used for glass products that are claiming fire resistance. The methodology covers Initial Type Testing as defined in the relevant glass product standard.NOTE This document provides guidance with the declaration of the

Glass in building - Safety in case of fire, fire resistance - Glass testing methodology for the purpose of classification; German version EN 15998:2020

DIN EN ISO 1182:2020 产品对着火试验的反应. 不可燃性试验(ISO 1182-2020); 德文版本EN ISO 1182-2020

This International Standard specifies a method of test for determining the non-combustibility performance, under specified conditions, of homogeneous products and substantial components of non-homogeneous products. Information on the precision of the test method is given in Annex

Reaction to fire tests for products - Non-combustibility test (ISO 1182:2020); German version EN ISO 1182:2020

DIN EN 81-73:2020 电梯建造和安装的安全规则. 客梯和客货两用梯的特殊应用. 第73部分: 火灾中电梯的性能

This European Standard specifies the special provisions and safety rules to assure a certain behavior of lifts in the event of fire. It applies to new passenger lifts and goods passenger lifts with all types of drive. However, it may be used as a basis for existing passenger and

Safety rules for the construction and installation of lifts - Particular applications for passenger and goods passenger lifts - Part 73: Behaviour of lifts in the event of fire; German version EN 81-73:2020

ISO 13784-2:2020 夹层板建筑系统的反应 - 防火试验 - 第2部分:大房间的试验方法

This document specifies a test method for evaluating the reaction-to-fire performance of thermal insulating sandwich panel building systems for large rooms and the resulting flame spread on or within the thermal insulating sandwich panel building construction when it is exposed to heat from a simulated internal fire with flames impinging directly on its internal corner. The test method is not intended for evaluating a product's fire resistance. This document is applicable to both freestanding and self-supporting and frame-supported thermal insulating sandwich panel systems, but only to wall and ceiling or roof constructions.

Reaction-to-fire tests for sandwich panel building systems — Part 2: Test method for large rooms

T/CPQS XF001-2020 防火防烟安全户门

本标准规定了防火防烟安全户门的术语和定义、分类和标记、要求、试验方法、检验规则。

Fire and smoke resistant and security doorsets

ASTM E3157-20 理解和使用与防火系统安装有关的信息的标准指南

Standard Guide for Understanding and Using Information Related to Installation of Firestop Systems

ASTM E2393-20a 现场检查安装的防火接头系统和周边防火墙的标准做法

1.1 This practice covers the establishment of procedures to inspect fire resistive joint systems, including methods for field verification and inspection. 1.2 This practice addresses all types of fire resistive joint systems and of perimeter joint protection. NOTE 1—Fire resistive joint system and joint are defined in Test Method E1966 and UL 2079. NOTE 2—Perimeter joint protection is defined in Test Method E2307. NOTE 3—Fire resistive joint systems include joints between two fire resistive assemblies, and perimeter joints between a fire resistive floor assembly and a non-fire-resistive wall assembly. The application of these systems are sometimes extended based on an evaluation to other types of construction. 1.3 This practice provides methods by which qualified inspectors verify that required fire resistive joint systems on a project have been installed and that their installations are in accordance with the inspection documents. 1.4 The values stated in inch-pound units are to be regarded as standard. No other units of measurement are included in this standard. 1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.6 The text of this standard references notes and footnotes which provide explanatory material. These notes and footnotes (excluding those in tables and figures) shall not be considered as requirements of the standard. 1.7 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Practice for On-Site Inspection of Installed Fire Resistive Joint Systems and Perimeter Fire Barriers

T/ZZB 1708-2020 木质防火门

本标准规定了木质防火门的分类、代号与标记、基本要求、技术要求、试验方法、检验规则、标志、包装、运输和贮存、质量承诺等内容。 本标准适用于工业与民用建筑用的平开式木质防火门。

Fire door set of timber

BS 8619:2020 压力容器防火材料和系统对碳氢化合物池火灾的抵抗力的测定 测试方法

1   Scope This British Standard specifies a test method for the determination of the resistance to hydrocarbon pool fires of pressure vessels with a fire protection system when subjected to standard fire exposure conditions. It does not apply to vessels cooled by water deluge or water monitor. The pressure vessel can be classified based on its performance during the test. The design of the pressure vessel is not covered in this British Standard.

Determination of the resistance to hydrocarbon pool fires of fire protection materials and systems for pressure vessels. Test method

20/30411240 DC BS EN ISO 21925-2 耐火性测试 空气分配系统防火阀 第 2 部分：膨胀型防火阀

BS EN ISO 21925-2. Fire resistance tests. Fire dampers for air distribution systems - Part 2. Intumescent dampers

EN 81-73:2020 电梯建造和安装的安全规则.客梯和客货两用梯的特殊应用.第73部分:火灾中电梯的性能

This document specifies the special provisions and safety rules describing the behaviour of lifts in the event of fire in a building, on the basis of a recall signal(s) to the lift(s) control system. This document applies to new passenger lifts and goods passenger lifts with all types of drives. However, it may be used as a basis to improve the safety of existing passenger and goods passenger lifts. This document does not apply to: - lifts that remain in use in the event of fire, e.g. firefighters lifts as defined in EN 81-72:2020, - lifts used for the evacuation of a building.

Safety rules for the construction and installation of lifts - Particular applications for passenger and goods passenger lifts - Part 73: Behaviour of lifts in the event of fire

ASTM D7309-20 使用微尺度燃烧热量法测定塑料和其他固体材料的易燃特性的标准测试方法

Standard Test Method for Determining Flammability Characteristics of Plastics and Other Solid Materials Using Microscale Combustion Calorimetry

EN 13381-1:2020 确定结构构件耐火性贡献的试验方法 第1部分：水平保护膜

This document specifies a test method for determining the ability of a horizontal protective membrane, when used as a fire resistant barrier, to contribute to the fire resistance of standard horizontal structural building members as defined in 6.4.2. Test of horizontal protective membrane installed under a specific non-standard floor should be tested according to EN 1365-2. This document contains the fire test which specifies the tests which are carried out whereby the horizontal protective membrane, together with the structural member to be protected, is exposed to a fire test according to the procedures defined herein. The fire exposure, to the temperature/time curve given in EN 1363-1, is applied from below the membrane itself. The test method makes provision, through specified optional additional procedures, for the collection of data which can be used as direct input to the calculation of fire resistance according to the processes given within EN 1992-1-2, EN 1993-1-2, EN 1994-1-2 and EN 1995-1-2. This document also contains the assessment which provides information relative to the analysis of the test data and gives guidance for the interpretation of the results of the fire test, in terms of loadbearing capacity criteria of the protected horizontal structural member. In special circumstances, where specified in national building regulations, there can be a need to subject the protection material to a smouldering curve. The test for this and the special circumstances for its use are detailed in Annex C. The limits of applicability of the results of the assessment arising from the fire test are defined, together with permitted direct application of the results to different structures, membranes and fittings. This document applies only where there is a gap and a cavity between the horizontal protective membrane and the structural building member. Otherwise, the test methods in EN 13381-3, EN 13381-4 or EN 13381-5, as appropriate, apply. Tests are intended to be carried out without additional combustible materials in the cavity. Annex A gives details of assessing the performance of the ceiling when exposed to a semi-natural fire.

Test methods for determining the contribution to the fire resistance of structural members - Part 1: Horizontal protective membranes

ASTM E3037-20 测量穿透防火系统相对运动能力的标准测试方法

1.1 This test method covers testing procedures for throughpenetration firestop systems. This test method is intended for the following uses: NOTE 1—Refer to Test Method E814 for definition of “throughpenetration firestop system.” 1.1.1 To determine relative movement capability in two separate and distinct planes of movement for different types of through-penetration firestop systems, 1.1.2 To standardize a comparison of movement capability by establishing standardized test conditions, in order to allow the type of through-penetration firestop system’s movement capabilities to be examined, 1.1.3 To provide the user with information on amplitudes of relative movement between the penetrating items and the substrate (concrete-based or gypsum-based). NOTE 2—Amplitude is the measure of change over a single cycle. 1.2 This test method is intended to be used only as part of a specification or acceptance criteria due to the limited movements tested, and limited number of variables examined. 1.3 This test method uses standardized configurations for the test specimen. Test results will not be representative of all possible through-penetration firestop systems. 1.4 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. 1.5 The text of this standard references notes, comments, and footnotes which provide explanatory material. These notes, comments, and footnotes (excluding those in tables and figures) shall not be considered requirements of this standard. 1.6 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. Some specific hazards statements are given in Section 7 on Safety Hazards. 1.7 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Test Method for Measuring Relative Movement Capabilities of Through-Penetration Firestop Systems

BS EN ISO 1182:2020 对产品防火测试的反应 不燃性测试

What is ISO 1182 about?    ISO 1182 specifies a test method for determining the non-combustibility performance, under specified conditions, of homogeneous products and substantial components of non-homogeneous products.   This fire test has been developed for use by those responsible for the selection of construction products which, whilst not completely inert, produce only a very limited amount of heat and flame when exposed to temperatures of approximately 750 °C.   Who is ISO 1182 for?    ISO 1182 on non-combustibility tests are relevant for:  

Reaction to fire tests for products. Non-combustibility test