13.220.50 建筑材料和构件的阻燃性 标准查询与下载

DB37/T 3724-2019 外墙保温材料燃烧性能现场快速检测方法

On-site rapid detection method for combustion performance of external wall insulation materials

BS 9414:2019 外墙覆层系统的防火性能 BS 8414-1 和 BS 8414-2 测试结果的应用

1   Scope This British Standard specifies procedures and rules used to evaluate variations and changes to products and systems which have been tested in accordance with BS 8414‑1:2015+A1:2017 or BS 8414‑2:2015+A1:2017, and, where appropriate, defines options and limits for preparing reports based on the direct and extended application criteria provided. The following systems are covered: • rain-screens; • external thermal insulated composite systems (ETICS); • self-supporting double skin metal faced insulating (sandwich) panels. This British Standard covers specific parameters and product characteristics associated with the design of non-loadbearing external cladding systems which have been tested in accordance with BS 8414‑1:2015+A1 or BS 8414‑2:2015+A1. This British Standard does not cover the performance of systems that include glazed elements, infill panels or external insulation finishing systems (EIFS). This British Standard does not cover systems that have been tested in accordance with BS EN 1364. NOTE Guidance for extending the scope of application for BS EN 1364 tests is given in BS EN 15254‑2, BS EN 15254‑4, BS EN 15254‑5, BS EN 15254‑6 and BS EN 15254‑7.

Fire performance of external cladding systems. The application of results from BS 8414-1 and BS 8414-2 tests

ASTM E3202-19e1 评定表面燃烧特性的甲板、楼梯踏板、防护装置或扶手用塑料复合材料试样制备和安装的标准实施规程

1.1 This practice describes a procedure for specimen preparation and mounting when testing plastic composite materials for use as deck boards, stair treads, guards or handrails to assess flame spread index as a surface burning characteristic using Test Method E84. 1.2 This practice applies to plastic composite materials, including plastic lumber and wood-plastic composites. The test specimens shall be self-supporting or held in place by added supports along the test surface, in accordance with Annex A4 of Test Method E84. 1.3 This practice does not provide pass/fail criteria that can be used as a regulatory tool. 1.4 This practice is applicable to (a) materials that are self-supporting and (b) materials that are not self-supporting but where the test specimen is held in place by added supports throughout the test duration without such severe sagging that it interferes with the effect of the gas flame on the test specimen. NOTE 1—Paragraph 1.4 reflects requirements contained in plastic lumber specifications. 1.5 Use the values stated in inch-pound units as the standard in referee decisions. The values in the SI system of units are given in parentheses, for information only; see IEEE/ASTM SI-10 for further details. 1.6 This fire standard cannot be used to provide quantitative measures. 1.7 Fire testing of products and materials is inherently hazardous and adequate safeguards for personnel and property shall be employed in conducting these tests. Fire testing involves hazardous materials, operations and equipment. 1.8 This practice gives instructions on specimen preparation and mounting but the fire-test-response method shall be conducted in accordance with Test Method E84. See also Section 8 for information on operator safety. 1.9 The text of this practice references notes and footnotes which provide explanatory material. These notes and footnotes (excluding those in tables and figures) shall not be considered requirements of the standard. 1.10 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.11 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Practice for Specimen Preparation and Mounting of Plastic Composites for Use as Deck Boards, Stair Treads, Guards or Handrails to Assess Surface Burning Characteristics

ASTM E3202-19 评定表面燃烧特性的甲板、楼梯踏板、防护装置或扶手用塑料复合材料试样制备和安装的标准实施规程

Standard Practice for Specimen Preparation and Mounting of Plastic Composites for Use as Deck Boards, Stair Treads, Guards or Handrails to Assess Surface Burning Characteristics

BS ISO 834-2:2019 耐火测试 建筑结构要素 测量测试样品的炉暴露情况的要求和建议

What is BS ISO 834-2 - Measuring furnace exposure about?   BS ISO 834 is an International Standard that discusses fire-resistance tests for elements of building construction.     BS ISO 834-2 is the second part in the multi-series that establishes general principles for measuring the uniformity of furnace exposure of samples tested in accordance with the requirements of ISO 834 ‑ 1. BS ISO 834-2 specifies the type and location of instrumentation used to measure the temperature, velocity, and oxygen content near the surface of simulated test samples. The surface of the simulated sample facing the furnace is a gypsum board secured to cold-formed steel supports.   Note: BS ISO...

Fire-resistance tests. Elements of building construction - Requirements and recommendations for measuring furnace exposure on test samples

19/30383073 DC BS EN 13501-3 建筑产品和建筑构件的防火分类 第 3 部分：使用建筑服务装置和电缆中使用的产品和构件的耐火测试数据进行分类

BS EN 13501-3. Fire classification of construction products and building elements - Part 3. Classification using data from fire resistance tests on products and elements used in building service installations and electrical cables

19/30383035 DC BS ISO 22899-1 被动防火材料抗喷射火性能的测定 第 1 部分：一般要求

BS ISO 22899-1. Determination of the resistance to jet fires of passive fire protection materials - Part 1. General requirements

ISO 5660-1:2015/Amd 1:2019 着火反应试验.热释放 烟雾产生和质量损失率.第1部分:热释放率（锥形量热计法）和烟雾产生率（动态测量）.修改件1

Reaction-to-fire tests — Heat release, smoke production and mass loss rate — Part 1: Heat release rate (cone calorimeter method) and smoke production rate (dynamic measurement) — Amendment 1

ASTM E736/E736M-19 应用于结构构件的喷涂耐火材料的粘聚力/附着力的标准试验方法

1.1 This test method covers a procedure for measuring the cohesion/adhesion or bond strength (tensile) perpendicular to the surface of sprayed fire-resistive material (SFRM) applied to rigid backing. These fire-resistive materials include sprayed fibrous and cementitious materials. The test method is applicable to both laboratory and field procedures as indicated in Section 7. 1.2 The values stated in either SI units or inch-pound units are to be regarded separately as standard. The values stated in each system are not necessarily exact equivalents; therefore, to ensure conformance with the standard, each system shall be used independently of the other, and values from the two systems shall not be combined. 1.3 This standard does not purport to address all of the safety problems, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Test Method for Cohesion/Adhesion of Sprayed Fire-Resistive Materials Applied to Structural Members

JG/T 572-2019 建筑木结构用阻燃涂料

　　现批准《建筑木结构用阻燃涂料》为建筑工业行业产品标准，编号为JG/T572-2019，自2019年12月1日起实施。 　　本标准在住房和城乡建设部门户网站（www.mohurd.gov.cn）公开，并由住房和城乡建设部标准定额研究所组织中国标准出版社出版发行。 　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　中华人民共和国住房和城乡建设部 　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　2019年7月18日  

Fire retardant coatings for building wood structures

19/30394111 DC BS EN 1366-4 服务设施的耐火测试 第 4 部分：线性接缝密封

BS EN 1366-4. Fire resistance tests for service installations - Part 4. Linear joint seals

ASTM E84-19b 建筑材料表面燃烧特性的标准试验方法

Standard Test Method for Surface Burning Characteristics of Building Materials

19/30388080 DC BS ISO 23693-1 被动防火材料耐瓦斯爆炸性能的测定 第 1 部分：一般要求

BS ISO 23693-1. Determination of the resistance to gas explosions of passive fire protection materials - Part 1. General Requirements

ISO 834-2:2019 耐火试验.建筑构件.第2部分:在试验样品上测量熔炉暴露的要求和建议

This document establishes general principles for measuring the uniformity of furnace exposure of samples tested in accordance with the requirements of ISO 834-1. This document specifies the type and location of instrumentation used to measure the temperature, velocity and oxygen content near the surface of simulated test samples. The surface of the simulated sample facing the furnace is gypsum board secured to cold-formed steel supports. This document does not include requirements for furnace performance. An intended use of data generated by the application of this document and the rational for the instrumentation described in this document are contained in the informative Annex A.

Fire-resistance tests — Elements of building construction — Part 2: Requirements and recommendations for measuring furnace exposure on test samples

EN 13381-7:2019 确定结构构件耐火性贡献的试验方法 第7部分：木材构件的应用保护

This document specifies test methods for determining the contribution of fire protection kits to the fire resistance of structural timber members. Such fire protection kits include claddings, sprayed fire protection and reactive coatings. The method is applicable to all fire protection kits used for the protection of timber members. These can be fixed directly, totally or in part, to the timber member and can include an air gap between the fire protectionkit and the timber member, as an integral part of its design. Evaluation of timber constructions protected by horizontal or vertical protective membranes are the subject of EN 13381-1 or EN 13381-2 respectively. The test method is applicable to the determination of the contribution of fire protection kits to the fire resistance of loadbearing timber structural members including floors, roofs, walls, beams and columns. This document contains the fire test which specifies the test to be carried out to determine the ability of the fire protection kit at a specified thickness to delay the temperature rise throughout the timber member, to determine the ability of the fire protection kit at a specified thickness to remain coherent and fixed to the timber member and to provide data for determining the charring rate of the protected test member, when exposed to the standard temperature/time curve according to the procedures defined herein. This document is not appropriated to classify the tested assembly according to EN 13501-2. The test to subject reactive protection material to a smouldering temperature time fire curve and the special circumstances for this are detailed in Annex G. The fire test methodology makes provision for the collection and presentation of data which can be used as direct input to the calculation of fire resistance of timber members in accordance with the procedures given in EN 1995-1-2. A description of the relationship of this test method and the assessment of the results obtained therefrom to EN 1995-1-2 and guidelines for the use of this test method in accordance with that standard are given in Annex B. This document also contains the assessment which indicates how the analysis of the test data should be made and gives guidance to the procedures by which interpolation should be undertaken. The limits of applicability of the results of the assessment arising from the fire test are defined, together with the direct application of the results to different timber constructions with the specified thickness and fixation of the applied fire protection kit tested.

Test methods for determining the contribution to the fire resistance of structural members - Part 7: Applied protection to timber members

ASTM D3143/D3143M-19 用开口杯装置测定稀释沥青闪点的标准试验方法

1.1 This test method covers the determination of flash points by the Tag open-cup apparatus of cutback asphalts having flash points of less than 93 °C [200 °F]. NOTE 1—Specifications commonly designate the Cleveland open cup (Test Method D92, IP 36) method for asphalt cements and cutback asphalts having flash points above 79 °C [175 °F]. NOTE 2—This procedure follows in general the procedure outlined in Test Method D1310, but is restricted to cutback asphalt having flash points of less than 93 °C [200 °F]. 1.2 The values stated in either SI units or inch-pound units are to be regarded separately as standard. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in non-conformance with the standard. 1.3 The text of this standard references notes and footnotes which provide explanatory material. These notes and footnotes (excluding those in tables and figures) shall not be considered as requirements of the standard. 1.4 Warning—Mercury has been designated by the United States Environmental Protection Agency and many state agencies as a hazardous material that can cause central nervous system, kidney, and liver damage. Mercury, or its vapor, may be hazardous to health and corrosive to materials. Caution should be taken when handling mercury and mercurycontaining products. See the applicable Safety Data Sheet (SDS) or Material Safety Data Sheet (MSDS) for details and the EPA’s website (http://www.epa.gov/mercury/index.htm) for additional information. Users should be aware that selling mercury and/or mercury-containing products in your state may be prohibited by state law. 1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.6 This standard should be used to measure and describe the properties of materials, products, or assemblies in response to heat and flame under controlled laboratory conditions and should not be used to describe or appraise the fire hazard or fire risk of materials, products, or assemblies under actual fire conditions. However, results of this test may be used as elements of a fire risk assessment which takes into account all of the factors which are pertinent to an assessment of the fire hazard of a particular end use. 1.7 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Test Method for Flash Point of Cutback Asphalt with Tag Open-Cup Apparatus

T/CSIA 002-2019 隔离式纳塑板外墙防火保温系统应用规程

本标准规定了隔离式纳塑板外墙防火保温系统及其主要组成材料性能要求、设计要求、施工要求、 施工检验与验收。 本标准适用于新建、扩建和改建(含既有建筑节能改造)的民用建筑、工业建筑隔离式纳塑板外墙防 火保温系统设计、施工及工程质量验收。

Application technology specification for external thermal insulation using partition type of structural fireproof thermal board

ISO/TR 17252:2019 火灾试验.火灾反应试验对火灾模型和消防安全工程的适用性

Fire tests — Applicability of reaction to fire tests to fire modelling and fire safety engineering

ISO 834-13:2019 耐火试验.建筑构件.第13部分:带腹板开口的钢梁的防火试验和评定要求

This document specifies a test and assessment method for determining the contribution made by fire protection systems to the fire resistance of structural steel beams, I and H sections, in the horizontal plane containing openings in the web which may affect the structural performance of the beam. It is applicable to beams subjected to three or four sided fire exposure. For any cellular beam with a single web opening or where the web openings are considered to be of small diameter in relation to the web depth the applicability of this document is intended to be determined by a structural engineer This document adopts the principle of establishing ratios of temperatures between and around openings in the web of a beam with the temperatures of a solid portion of that beam. This is with the intention that these data can be utilised within a structural model to derive the value and location of the associated limiting temperature of the beam at the fire limit state. The limiting temperature is then used in conjunction with data for the fire protection material determined from ISO 834-10 and ISO 834-11 to determine the necessary thickness of fire protection material for beams with web openings. This document applies to fire protection materials that have already been tested and assessed in accordance with ISO 834-10 and ISO 834-11 and is not intended to be used in isolation. It covers fire protection systems that include both passive and reactive materials which follow the section profile as defined in this document. This document includes the use of a multi-temperature analysis (MTA) derived from ISO 834-11 as the basis for determining the thickness of fire protection for beams with web openings. This document contains an assessment method, which prescribes how the analysis of the test data should be made and gives guidance on the procedures that could be undertaken. The assessment procedure can be used to establish: a) The thermal response of the fire protection system on cellular beams, (the thermal performance) on the basis of the temperature data derived from testing unloaded steel sections. b) The temperature ratio between the web post and the web reference temperature, which will vary depending on the web post width. c) The temperature ratio between points around the web openings and the web reference area. d) A structural model that can be used to derive limiting temperatures for cellular beams.

Fire-resistance tests — Elements of building construction — Part 13: Requirements for the testing and assessment of applied fire protection to steel beams with web openings

ISO 834-14:2019 耐火试验.建筑构件.第14部分:实心钢筋防火性能试验和评定要求

This document specifies a test and assessment method for determining the contribution of fire protection systems to the fire resistance of circular and rectangular solid steel bar. ISO 834-10 intended to be used for twisted wire or for cold or hot rolled steel bar which is primarily used for the reinforcement of concrete. This document is applicable for the protection of solid bar up to a maximum diameter of 130 mm and in the case of rectangular bar the maximum side length shall be limited to 130 mm with a maximum aspect ratio of 2:1 against the shorter length side. Beyond these limits, the solid steel bars are covered This document is intended to be used with any applied fire protection system, including multi-layered systems, that have demonstrated their integrity/stickability when tested on floor beams and hollow sections under load, and assessed in accordance with ISO 834-11. This document does not incorporate results from a loaded test on a tension member. Guidance for conducting a fire test on a steel bar under a tensile load is provided in Annex C. This document contains the fire test methodology to provide data on the thermal characteristics of the fire protection system when exposed to the standard temperature/time curve specified in ISO 834-1. It also contains an assessment method for the analysis of the test data. The limits of applicability of the results of the assessment arising from the fire test are defined together with permitted direct application of the results to different steel types and sizes over the range of thicknesses of the applied fire protection system tested. The assessment procedure is used to establish: — on the basis of temperature data derived from testing steel bars, any practical constraints on the use of the fire protection system under fire test conditions, (the physical performance); — on the basis of the temperature data derived from testing steel bars, the thermal properties of the fire protection system, (the thermal performance). The limits of applicability of the results of the assessment arising from the fire test are defined together with permitted direct application of the results to different steel types and sizes of steel bar over the range of thicknesses of the applied fire protection system tested. This document describes testing in both the vertical and horizontal orientations at the discretion of the sponsor. 

Fire-resistance tests — Elements of building construction — Part 14: Requirements for the testing and assessment of applied fire protection to solid steel bar