13.220.50 建筑材料和构件的阻燃性 标准查询与下载

ASTM E119-18 建筑结构和材料防火试验的标准试验方法

Standard Test Methods for Fire Tests of Building Construction and Materials

ASTM E2231-18 标准制定和安装管道和管道绝热材料以评估表面燃烧特性的标准实施规程

Standard Practice for Specimen Preparation and Mounting of Pipe and Duct Insulation Materials to Assess Surface Burning Characteristics

ASTM E84-18 建筑材料表面燃烧特性的标准试验方法

Standard Test Method for Surface Burning Characteristics of Building Materials

BS EN 1364-2:2018 非承重构件的耐火测试 天花板

What is BS EN 1364-2 - Fire resistance tests for non-loadbearing elements - Ceilings about?   BS EN 1364-2 is the second part of the multi-series standard that is applicable to the fire resistance of ceilings.   This part of EN 1364 specifies a method for determining the fire resistance of ceilings, which in themselves possess fire resistance independent of any building element above them. This European Standard is used in conjunction with BS EN 1363-1 .   The contribution to fire resistance which a suspended ceiling might provide as a protective membrane to loadbearing elements is determined using the procedure given in EN 13381-1 . The fire resistance of loadbearing floors in conjunction with a suspended ceiling can also be assessed by using tests according to EN 1365-2 .   Who is BS EN 1364-2 -

Fire resistance tests for non-loadbearing elements. Ceilings

KS F ISO 5660-1:2018 反火测试 - 放热 烟雾产生和质量损失率 - 第1部分:热释放速率（锥形量热计方法）和烟雾产生率（动态测量）

Reaction-to-fire tests — Heat release, smoke production and mass loss rate — Part 1: Heat release rate(cone calorimeter method) and smoke production rate(dynamic measurement)

KS F ISO 5660-1-2018 反火测试 - 放热 烟雾产生和质量损失率 - 第1部分:热释放速率（锥形量热计方法）和烟雾产生率（动态测量）

Reaction-to-fire tests — Heat release, smoke production and mass loss rate — Part 1: Heat release rate(cone calorimeter method) and smoke production rate(dynamic measurement)

18/30366928 DC BS EN 1366-3 服务设施的耐火测试 第3部分：渗透密封

BS EN 1366-3. Fire resistance tests for service installations - Part 3. Penetration seals

ASTM E2816-18 耐火金属暖通空调系统的标准试验方法

Standard Test Methods for Fire Resistive Metallic HVAC Duct Systems

ASTM F3214-18 娱乐设施和装置相关车辆所用材料的火特性表征的标准实施规程

1.1 This practice covers material properties related to flammability, smoke products and heat release rates for materials specified for vehicles associated with amusement rides and devices. 1.2 This practice also defines specific requirements for standardized test methods for determining material properties related to flammability, smoke production and heat release rates for materials specified for vehicles associated with amusement rides and devices. 1.3 This practice defines acceptance criteria for the material properties of flammability, smoke production and heat release rates for seating, upholstery and padding materials specified for vehicles on amusement rides and devices. 1.4 This practice includes an appendix (non-mandatory), which provides additional information (for example, rationale, background, interpretations, drawings, commentary, and so forth) to improve the user’s understanding and application of the criteria presented in this practice. The appendix information shall not be interpreted as mandatory design criteria. 1.5 This practice shall not apply to: 1.5.1 Materials specified for amusement rides or devices not associated with the vehicle. 1.5.2 Materials used for the construction of facilities. 1.5.3 Fluids and lubricants. 1.5.4 Mats used on water slides or other aquatic devices. 1.6 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.7 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Practice for Characterization of Fire Properties of Materials Specified for Vehicles Associated with Amusement Rides and Devices

EN 1364-2:2018 非承重构件的耐火试验.第2部分:顶棚

Fire resistance for tests for non-loadbearing elements - Part 2: Ceilings

KS F ISO 12949-2017(2022) 测量床垫和床垫组件热释放率的标准试验方法

Standard test method for measuring the heat release rate of mattresses and mattress sets

KS F ISO 13784-1-2017 三明治建筑系统的防火测试反应 - 第1部分:小房间测试

Reaction to fire test for sandwich panel building systems —Part 1: Small room test

KS F ISO 12949-2017 测量床垫和床垫套放热率的标准试验方法

Standard test method for measuring the heat release rate of mattresses and mattress sets

KS F ISO 12949:2017 测量床垫和床垫套件热释放率的标准试验方法

Standard test method for measuring the heat release rate of mattresses and mattress sets

KS F ISO 13784-1:2017 夹层板建筑系统的火灾反应试验 第1部分：小房间试验

Reaction to fire test for sandwich panel building systems —Part 1: Small room test

ASTM E3134-17 运输隧道结构部件和被动防火系统的标准规范

Standard Specification for Transportation Tunnel Structural Components and Passive Fire Protection Systems

ASTM E2726/E2726M-12a(2017) 评估甲板结构对燃烧品牌的耐火试验的标准试验方法

1.1 This test method determines the fire-test-response characteristics of deck structures attached to or in close proximity to primary structures. The burning brand exposures test is intended to determine the degradation modes of decking materials when exposed to a burning brand on the upper surface of a deck structure. 1.2 The use of paints, coatings, stains, or other surface treatments for fire protection purposes are beyond the scope of this test method. This test method excludes the use of paints, stains, or coatings for this fire-test-response determination. 1.3 The values stated in either SI units or inch-pound units are to be regarded separately as standard. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in non-conformance with the standard. 1.4 This standard is used to measure and describe the response of materials, products, or assemblies to heat and flame under controlled conditions, but does not by itself incorporate all factors required for fire-hazard or fire-risk assessment of the materials, products, or assemblies under actual fire conditions. 1.5 Fire testing of products and materials is inherently hazardous. Adequate safeguards for personnel and property shall be employed in conducting these tests. 1.6 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.7 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Test Method for Evaluating the Fire-Test-Response of Deck Structures to Burning Brands

ISO/TR 12470-2:2017 耐火试验 - 结果的应用和延伸指导 - 第2部分:防火门组件 玻璃窗 服务和服务渗透

Fire-resistance tests — Guidance on the application and extension of results from tests conducted on fire containment assemblies and products — Part 2: Non-loadbearing elements

ISO/TR 12470-1:2017 耐火试验 - 结果的应用和延伸指导 - 第1部分:承载元件和垂直和水平分离元件

Fire-resistance tests — Guidance on the application and extension of results from tests conducted on fire containment assemblies and products — Part 1: Loadbearing elements and vertical and horizontal

ASTM E2750-17 根据ASTM进行渗透阻火系统试验数据扩展的标准指南

Standard Guide for Extension of Data from Penetration Firestop System Tests Conducted in Accordance with ASTM