13.220.50 建筑材料和构件的阻燃性 标准查询与下载

GSO ISO 834-6:2015 耐火试验建筑结构要素 第6部分：梁的特殊要求

This part of ISO 834 specifies the procedures to be followed for determining the fire resistance of beams, when tested on their own. Beams are normally tested with their underside and two vertical sides fully exposed to heating. However, when the exposure is from four sides or less than three sides, appropriate exposure conditions are necessary. Beams which are part of a floor construction are tested with the floor construction as described in ISO 834-5 and are subject to evaluation of integrity and insulation. The application of this test to other untested forms of construction is acceptable when the construction complies with the direct field of application as given in this part of ISO 834 or when subjected to an extended application analysis in accordance with ISO/TR 12470. Since ISO/TR 12470 gives only general guidelines, specific extended application analyses are to be performed only by persons expert in fire-resistant constructions. General guidance on this test method is given in annex A.

Fire-resistance tests -- Elements of building construction -- Part 6: Specific requirements for beams

GSO ISO/TR 5925-2:2015 防火测试 防烟门和门扇组件 第2部分：对测试方法、测试条件的适用性以及测试数据在防烟策略中的使用的评论

This Technical Report provides a commentary that explains the general philosophy and factors on which the test specified in Part 1 of ISO 5925 has been designed, to describe the limitations of its application and to provide some general guidance for those who use the result of the test. Smoke control-door and shutter assemblies can be used as part of a smoke containment strategy for the purposes of life safety or property protection.

Fire tests -- Smoke-control door and shutter assemblies -- Part 2: Commentary on test method and the applicability of test conditions and the use of test data in a smoke containment strategy

GSO ISO 834-5:2015 耐火试验建筑物结构构件 第5部分：水平分隔荷载构件的特殊要求

This part of ISO 834 specifies the procedures to be followed for determining the fire resistance of loadbearing horizontal separating elements when exposed to heating from the underside. The test is also appropriate for the evaluation of loadbearing separating elements containing beams when it is not possible to test the floor or roof assembly in a representative manner without them. However, the data cannot be transferred directly one to the other. The application of this test to other untested forms of construction is acceptable when the construction complies with the direct field of application as given in this part of ISO 834 or when subjected to an extended application analysis in accordance with ISO/TR 12470. Since ISO/TR 12470 gives only general guidelines, specific extended application analyses are to be performed only by persons expert in fire-resistant constructions.

Fire-resistance tests -- Elements of building construction -- Part 5: Specific requirements for loadbearing horizontal separating elements

GSO ISO/TR 9705-2:2015 对火灾测试的响应 表面产品的模拟房间规模测试 第2部分：技术背景和指导

This part of ISO 9705 provides guidance on ISO 9705:1993. It describes the technical background of the test and gives information which may be used for determining a testing procedure for a specific scenario, or how results can be utilized in a total hazard analysis for the specified scenario.

Reaction-to-fire tests -- Full-scale room tests for surface products -- Part 2: Technical background and guidance

DIN EN 1366-2:2015 服务设施防火试验.第2部分:防火盖;德文版本EN 1366-2:2015

Fire resistance tests for service installations - Part 2: Fire dampers; German version EN 1366-2:2015

BS EN 1364-1:2015 非承重构件的耐火试验.墙

Fire resistance tests for non-loadbearing elements. Walls

KS F 1611-1-2015 建筑构造构建的耐火性能标准.第1部分:木造墙壁、地板与天棚

Fire resistance performance for elements of building construction — Part 1: Wall, floor and roof assemblies of light-frame wood structures

KS F 2835-2015 基于单一火源的建筑材料燃烧性能检测方法

Reaction to fire tests for building products exposed to the thermal attack by a single burning item

KS F 4742-2015 非承重墙轻型钢构件

Light-gauge steel framing members for non-bearing wall

KS F 1611-4-2015 建筑构造构建的耐火性能标准.第4部分:复合地板构造

Fire resistance performance for elements of building construction — Part 4: Composite metal deck slab system

KS F 1611-4-2015(2020) 建筑构件的耐火性能第4部分:组合金属桥面板体系

Fire resistance performance for elements of building construction — Part 4: Composite metal deck slab system

BS EN 1366-2:2015 服务设施的耐火测试 防火阀

Fire resistance tests for service installations. Fire dampers

EN 1366-2:2015 建筑设施的耐火测试.第2部分:防火挡板

This European Standard specifies a method for determining the fire resistance of fire dampers installed in fire separating elements designed to withstand heat and the passage of fire, smoke and gases at high temperature. This European Standard is used in conjunction with EN 1363-1. This standard is not suitable for testing fire dampers in suspended ceilings. This standard is not suitable for testing non-mechanical fire dampers (see EN 1366-12).

Fire resistance tests for service installations - Part 2: Fire dampers

SS 489-2015 防火卷帘规范

This Singapore Standard specifies requirements and testing methods to assess the fire-resistance of the shutter required to protect openings in walls and to resist passage of fire. This standard applies to fire-resistant vertical roller shutters, lateral shutters, horizontal roller shutters and folding sliding shutters.

Specification for fire shutters

BS 8414-2:2015 外部镶面系统的防火性能.结构钢架支撑并适用的非承重外部镶面系统的试验方法

Fire performance of external cladding systems. Test method for non-loadbearing external cladding systems fixed to and supported by a structural steel frame

BS 8414-1:2015 外部镶面系统的防火性能.建筑物的砌筑面墙用非承重外部镶面系统的试验方法

Fire performance of external cladding systems. Test method for non-loadbearing external cladding systems applied to the masonry face of a building

ANSI/ASTM E1740:2015 采用锥形量热计测定墙壁覆盖或天花板覆盖复合材料的热释放率及其它燃烧试验响应特性的标准试验方法

Standard Test Method for Determining the Heat Release Rate and Other Fire-Test-Response Characteristics of Wall Covering or Ceiling Covering Composites Using a Cone Calorimeter

BS ISO 5660-1:2015 燃烧反应试验. 热量释放, 产生烟雾以及质量损失率. 热释放率 (锥形量热计法) 和烟雾产生率 (动态测量)

Reaction-to-fire tests. Heat release, smoke production and mass loss rate. Heat release rate (cone calorimeter method) and smoke production rate (dynamic measurement)

ISO 5660-1:2015 着火试验.火灾阻力.第1部分:建筑物产品热释放率(锥形热量计法)

Reaction-to-fire tests - Heat release, smoke production and mass loss rate - Part 1: Heat release rate (cone calorimeter method) and smoke production rate (dynamic measurement)

JG/T 470-2015 菱镁防火门芯板

本标准规定了菱镁防火门芯板的术语和定义、规格和标记、材料、要求、试验方法、检验规则及标志、包装、运输和贮存。本标准适用于填充在防火门内的菱镁防火门芯板。

Magnesite core board for fire resistant doorset