13.220.50 建筑材料和构件的阻燃性 标准查询与下载

KS F 2257-5-2014(2019) 建筑构件耐火试验方法承重水平分隔构件的特殊要求

Methods of fire resistance test for elements of building construction — Specific requirements for loadbearing horizontal separating elements

KS F 2257-7-2014(2019) 建筑构件耐火试验方法柱的特殊要求

Methods of fire resistance test for elements of building construction — Specific requirements for columns

GSO ISO 12468-2:2014 暴露在火中的屋顶 第2部分：屋顶的分类

This part of ISO 12468 establishes the classification of roofs tested in accordance with ISO 12468-1. Performance criteria are established with respect to the following: — fire penetration or openings; — external fire spread; — falling of flaming droplets or debris.

External exposure of roofs to fire -- Part 2: Classification of roofs

GSO ISO 10295-1:2014 建筑构件和部件的防火测试 服务设施的防火测试 第1部分：穿透密封

This part of ISO 10295 specifies the heating condition, method of test and criteria for the evaluation of the ability of a penetration sealing system to maintain the integrity and insulation of a fire separating element at the position at which it has been penetrated, for example by a service. This part of ISO 10295 assesses a) the effect of such penetrations on the integrity and insulation performance of the element concerned, b) the integrity and insulation performance of the penetration sealing system, c) the insulation performance of the penetrating service or services, and where appropriate, the integrity failure of a service. This part of ISO 10295 does not provide information concerning the influence of the inclusion of such penetrations and sealing systems on the load-bearing capacity of the element. It is possible that a penetration seal is a component of, or contributes to the performance of, a system to which special requirements apply. In such cases additional tests, relevant to the system and its function, can be necessary. Examples are chimneys and fire-rated ducts in air distribution systems. This part of ISO 10295 is not intended to provide quantitative information on the rate of leakage of smoke and/or hot gases or on the transmission or generation of fumes. Such phenomena are to be noted in describing the general behaviour of specimens during test. This part of ISO 10295 does not provide information on the ability of the seal to withstand stresses that can be caused by the movement or displacement of the penetration services in practice. NOTE Explanatory notes are included in

Fire tests for building elements and components -- Fire testing of service installations -- Part 1: Penetration seals

GSO ISO 12468-1:2014 暴露在火中的屋顶 第1部分：测试方法

CAUTION The attention of all persons concerned with managing and carrying out this fire test is drawn to the fact that fire testing may be hazardous and that there is a possibility that toxic and/or harmful smoke and gases may be evolved during the test. Mechanical and operational hazards may also arise during the construction of the test elements or structures, their testing, and disposal of test residues. An assessment of all potential hazards and risks to health shall be made and safety precautions shall be identified and provided. Written safety instructions shall be issued. Appropriate training shall be given to relevant personnel. Laboratory personnel shall ensure that they follow written safety instructions at all times. This part of ISO 12468 specifies a test method to determine the resistance of roofs to external exposure to fire. This method evaluates the behaviour of the roof when exposed to three types of burning brands combined with wind and with or without heat radiation, concerning a) the fire spread across the external surface of the roof, b) the fire spread within the roof, c) the fire penetration, and d) the production of flaming droplets or debris falling through the roof, from the underside of the roof, or from the exposed surface.

External exposure of roofs to fire -- Part 1: Test method

GSO ISO 14696:2014 火灾反应测试 使用平均温度测量来估计材料、产品和配方的火灾和热参数

This International Standard provides a method for measuring the response of materials, products and assemblies exposed in vertical orientation to controlled levels of radiant heating with a piloted ignition source. This test method is used to determine the ignitability, heat release rates, mass loss rates and visible smoke development of materials, products and assemblies under well-ventilated conditions. The heat release rate is ascertained by measurement of the oxygen consumption as determined by the oxygen concentration and flow in the exhaust product stream as specified in 5.5.8. Smoke development is quantified by measuring the obscuration of light by the combustion product stream. Specimens are exposed to heating fluxes ranging from 0 kW/m2 to 50 kW/m2. Hot wires are used as the ignition source. This test method has been developed for material, product or assembly evaluations, mathematical modelling and design purposes. The specimen shall be tested in thicknesses and configurations representative of actual end product or system uses. The test method in this International Standard is based on the apparatus described in ASTM E1623 [13].

Reaction-to-fire tests -- Determination of fire and thermal parameters of materials, products and assemblies using an intermediate-scale calorimeter (ICAL)

GSO ISO/TR 12471:2014 结构燃烧的计算设计 审查计算模型、火灾测试以估计材料输入和额外开发的需求

This Technical Report gives a review of the advances that have been made in measuring and understanding how structural materials respond to fire in terms of changes in their elevated temperature, and physical and mechanical characteristics, and to identify areas where further work is necessary to generate the data required. Analytical methods for heat transfer are combined with mechanical models to calculate structural behaviour from single elements up to complete frames under real fire and ISO Standard furnace heating conditions. This Technical Report reviews advances in computational analysis and indicates how these can be used with probabilistic analysis to provide a risk-based approach to structural fire engineering design.

Computational structural fire design -- Review of calculation models, fire tests for determining input material data and needs for further development

KS F 2256-2014 建筑物不燃结构部分的试验方法

Method of test for noncombustible structural parts of buildings

KS F 2258-2014 建筑物木结构件耐火试验方法

Method of fire test for wooden structural parts of buildings

KS F 2842-2014 贯穿式防火封条的耐火试验

Fire resistance tests for through penetration fire stops

NF P92-130-1:2014 服务设施的耐火试验. 第1部分: 通风管道

La présente Norme européenne spécifie une méthode de détermination de la résistance au feu des conduits de ventilation horizontaux ou verticaux, y compris les trappes d'accès qui font partie intégrante des conduits soumis à l'essai. L'essai examine le comportement des conduits exposés au feu de l'extérieur (conduit A) et de l'intérieur (conduit B). La présente Norme européenne est utilisée conjointement avec l'EN 1363-1.

Fire resistance tests for service installations - Part 1 : ventilation ducts

NF P92-130-12:2014 服务设施的耐火试验. 第12部分: 通风管道系统的非机械防火隔板

La présente partie de l'EN 1366 spécifie une méthode de détermination de la résistance au feu des barrières résistantes au feu non mécaniques installées dans des éléments de séparation résistants au feu, conçues pour résister à la chaleur et au passage des fumées et des gaz à haute température. La présente Norme européenne est utilisée conjointement avec l'EN 1363-1 et l'EN 1366-2.

Fire resistance tests for service installations - Part 12 : non-mechanical fire barrier for ventilation ductwork

BS EN 1366-1:2014 服务设施的耐火试验. 通风管道

Fire resistance tests for service installations. Ventilation ducts

BS EN 1366-12:2014 服务设施的耐火试验. 通风管道系统的非机械防火隔板

Fire resistance tests for service installations. Non-mechanical fire barrier for ventilation ductwork

NF P92-140-1:2014 测定结构构件耐火作用的试验方法. 第1部分: 水平防护层

La présente Norme européenne spécifie une méthode d'essai permettant de déterminer l'aptitude d'une membrane de protection horizontale, utilisée comme dispositif de protection contre le feu, à contribuer à la résistance au feu d'éléments de construction horizontaux normalisés tels que définis en 6.4.2.

Test methods for determining the contribution to the fire resistance of structural members - Part 1 : horizontal protective membranes

EN 1366-12:2014 服务设施的耐火试验 第12部分：通风管道系统的非机械防火屏障

This part of EN 1366 specifies a method for determining the fire resistance of non-mechanical fire barriers installed in fire separating elements designed to withstand heat and the passage of smoke and gases at high temperature. This European Standard is used in conjunction with EN 1363-1 and EN 1366-2. This European Standard is not suitable for testing non-mechanical fire barriers in suspended ceilings without modification. This European Standard is not suitable for testing fire dampers, see EN 1366-2. This European Standard is not suitable for testing such products as air transfer grilles, as the pressures and flows involved are different and may cause differing behaviour.

Fire resistance tests for service installations - Part 12: Non-mechanical fire barrier for ventilation ductwork

EN 1366-1:2014 服务设施的耐火试验.第1部分:管道

This European Standard specifies a method for determining the fire resistance of vertical and horizontal ventilation ducts including those access panels, which are integral part of the tested ducts. The test examines the behaviour of ducts exposed to fire from the outside (duct A) and fire inside the duct (duct B). This European Standard is used in conjunction with EN 1363-1. Annex A provides general guidance and gives background information. This European Standard is not applicable to: a) ducts whose fire resistance depends on the fire resistance performance of a ceiling or wall (where ducts are located in cavities enclosed by fire-resistant shafts or ceilings); b) ducts containing fire dampers at points where they pass through fire separations; c) one, two or three sided ducts; d) fixing of suspension devices (e. g. anchors) to floors or walls.

Fire resistance tests for service installations - Part 1: Ventilation ducts

BS EN 13381-1:2014 测定结构构件耐火作用的试验方法.水平防火薄板

Test methods for determining the contribution to the fire resistance of structural members. Horizontal protective membranes

EN 13381-1:2014 确定结构构件耐火性贡献的试验方法 第1部分：水平保护膜

This European Standard specifies a test method for determining the ability of a horizontal protective membrane, when used as a fire resistant barrier, to contribute to the fire resistance of standard horizontal structural building members as defined in 6.4.2. Test of horizontal protective membrane installed under a specific non-standard floor should be tested according to EN 1365-2. This European Standard contains the fire test which specifies the tests which are carried out whereby the horizontal protective membrane, together with the structural member to be protected, is exposed to a fire test according to the procedures defined herein. The fire exposure, to the temperature/time curve given in EN 1363-1, is applied from below the membrane itself. The test method makes provision, through specified optional additional procedures, for the collection of data which can be used as direct input to the calculation of fire resistance according to the processes given within EN 1992-1-2, EN 1993-1-2, EN 1994-1-2 and EN 1995-1-2. This European Standard also contains the assessment which provides information relative to the analysis of the test data and gives guidance for the interpretation of the results of the fire test, in terms of loadbearing capacity criteria of the protected horizontal structural member. In special circumstances, where specified in national building regulations, there can be a need to subject the protection material to a smouldering curve. The test for this and the special circumstances for its use are detailed in Annex C. The limits of applicability of the results of the assessment arising from the fire test are defined, together with permitted direct application of the results to different structures, membranes and fittings. This European Standard applies only where there is a gap and a cavity between the horizontal protective membrane and the structural building member. Otherwise, the test methods in prEN 13381-3, EN 13381-4 or prEN 13381-5, as approp

Test methods for determining the contribution to the fire resistance of structural members - Part 1: Horizontal protective membranes

BS PD ISO/TS 3814:2014 测定产品和材料对火反应的标准试验. 开发和应用

Standard tests for measuring reaction-to-fire of products and materials. Their development and application