13.220.50 建筑材料和构件的阻燃性 标准查询与下载

GB/T 16810-2006 保险柜耐火性能要求和试验方法

本标准规定了保险柜的分类与代号、耐火性能要求、试件要求、试验装置和测试仪器、标准耐火试验、耐火耐跌落试验、防爆试验、防爆兼耐火耐跌落试验、试验报告和标牌等内容。 本标准适用于保护纸张、磁带和计算机存储设备等保险柜的耐火试验。

Tests and requirements for fire resistance of record protection containers

GB/T 8625-2005 建筑材料难燃性试验方法

本标准规定了建筑材料难燃性试验的试验装置、试件制备、试验操作、试件燃烧后剩余长度的判断、判定条件及试验报告。 本标准适用于建筑材料难燃性的测定。

Test method of difficult-flammability for building materials

GB/T 9978-1999 建筑构件耐火试验方法

本标准规定了建筑构件耐火试验的试验装置、试验条件、试件要求、试验程序、耐火极限判定条件和试验报告。重构件，其他的构件、配件或结构可参照采 本标准适用于墙、梁、柱、楼板、吊顶和屋顶等承重和非承重用。

Fire-resistance tests--Elements of building construction

GB/T 5464-1999 建筑材料不燃性试验方法

本标准规定了在实验室条件下评定建筑材料燃烧性能的试验方法。　 安全警告--所有参与燃烧试验的人员均应注意，试样在燃烧时可能会释放出有害或有毒气体，应适当防范，以利健康。　 本标准适用于测试建筑材料，它不适用于测试有涂层、有饰面层或多层的制品。对于复合制品，可以对组成该制品的各组分材料分别进行测试，并在试验报告中说明。有涂层、有饰面层或多层的制品还可以按其他对火反应试验方法进行评定（参阅附录B（提示的附录）的B1）。

Non-combustibility test method of building materials

GB 12441-1998 饰面型防火涂料通用技术条件

本标准规定了建筑物及工程中可燃基材使用的饰面型防火涂料的定义、技术要求、试验方法、检验规则和标志、包装、贮存与运输。 本标准适用于各种饰面型膨胀防火涂料。非膨胀防火涂料可参照执行。

General technical specifications for finishing fire retardant paint

GB 17428-1998 通风管道的耐火试验方法

本标准规定了通风管道在标准火灾条件下耐火试验的试验原理、试验条件、试验装置、试验程序、判定条件和试验报告等项内容。 本标准适用于安装在空调通风系统中的各种材质的管道。 本标准适用于有支管、接口或无支管、接口的通风管道。 本标准适用于火焰来自管道内部的通风管道。 本标准不适用于火焰来自管道外部的通风管道。 排烟管道的耐火试验可以参照本标准执行。

Fire resistance test method of ventilation ducts

GB 8624-1997 建筑材料燃烧性能分级方法

本标准规定了建筑材料燃烧性能的评定和分级标准。 本标准适用于各类工业和民用建筑工程中所使用的结构材料和各种装饰装修材料。

Classification on burning behaviour for building meterials

GB/T 8924-1988 玻璃纤维增强塑料燃烧性能试验方法氧指数法

本标准规定了玻璃纤维增强塑料燃烧性能试验方法之一--氧指数法的试验装置、试验步骤和结果计算。 本标准适用于测定玻璃纤维增强塑料在本标准规定条件下，试样持续燃烧所必须的最低氧浓度，它以氧的体积百分比表示。 本标准仅适用于评定本标准规定条件下材料的燃烧性能，但不能评定实际使用条件下的着火危险性。

Test method for flammability characteristics of glass fiber reinforced plastics using the oxygen index method

GB/T 8626-1988 建筑材料可燃性试验方法

本标准是在规定的条件下判定建筑材料是否具有可燃性的试验方法。

Test method of flammability for building materials

ASTM E814-24 穿透防火系统防火测试的标准测试方法

1.1  This test method is applicable to firestop systems of various materials and construction. Firestop systems are intended for use in openings in fire-resistive walls and floors that are evaluated in accordance with Test Methods E119 . 1.2  Tests conducted in conformance with this test method record firestop system performance during the test exposure; but such tests shall not be construed to determine suitability of the firestop system for use after test exposure. 1.3  This test method also measures the resistance of firestop systems to an external force stimulated by a hose stream. However, this test method shall not be construed as determining the performance of the firestop system during actual fire conditions when subjected to forces such as failure of cable support systems and falling debris. 1.4  The intent of this test method is to develop data to assist others in determining the suitability of the firestops for use where fire resistance is required. 1.5  This test method does not apply to membrane penetrations of a floor-ceiling assembly or roof-ceiling assembly that are tested as part of the assembly in accordance with Test Methods E119 . 1.6  This test method does not apply to membrane penetrations of load-bearing walls. 1.7  The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. 1.8  This standard is used to measure and describe the response of materials, products, or assemblies to heat and flame under controlled conditions, but does not by itself incorporate all factors required for fire-hazard or fire-risk assessment of materials, products, or assemblies under actual fire conditions. 1.9  This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.10  The text of this standard references notes and footnotes which provide explanatory material. These notes and footnotes (excluding those in tables and figures) shall not be considered requirements of the standard. 1.11  This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Test Method for Fire Tests of Penetration Firestop Systems

ASTM E2749-24 试样上熔炉暴露均匀性测量的标准实施规程

Standard Practice for Measuring the Uniformity of Furnace Exposure on Test Specimens

ASTM E119-24 建筑结构和材料防火试验的标准试验方法

Standard Test Methods for Fire Tests of Building Construction and Materials

GSO EN 13501-1:2024 建筑产品和建筑构件的防火分类 第1部分：使用防火试验反应数据进行分类

This document provides the reaction to fire classification procedure for all construction products, including products incorporated within building elements with the exception of power, control and communication cables which are covered by EN 13501-6. Products are considered in relation to their end use application. This document applies to three categories, which are treated separately in this document: - construction products, excluding floorings and linear pipe thermal insulation products; - floorings; - linear pipe thermal insulation products. NOTE For CE marking of construction products under the Construction Product Regulation ((EC) 305/2011) the NPD option can be used when no reaction of fire performance is to be declared.

Fire classification of construction products and building elements - Part 1: Classification using data from reaction to fire tests

GSO ISO 11925-2:2024 防火试验反应 受火焰直接冲击的产品可燃性 第2部分：单火焰源试验

This document specifies a method of test for determining the ignitability of products by direct small flame impingement under zero impressed irradiance using vertically oriented test specimens. Information on the precision of the test method is given in Annex A (informative). Information on testing not essentially flat end-use products is given in Annex B (normative). Information on testing perforated end-use products is given in Annex C (normative).

Reaction to fire tests — Ignitability of products subjected to direct impingement of flame — Part 2: Single-flame source test

24/30472088 DC BS EN 1366-14 设备安装的耐火测试 第14部分：部分渗透密封

BS EN 1366-14 Fire resistance tests for device installations - Part 14: Partial penetration seals

T/QGCML 4028-2024 推闩式机械逃生门锁

本文件规定了推闩式机械逃生门锁的术语和定义、分类、产品型号、要求、试验方法、检验规则、标志、包装、运输和贮存。 本文件适用于安装在疏散门上的推闩式机械逃生门锁（简称“门锁”）。

Push-latch mechanical escape door lock

T/CASME 1420-2024 混凝土防火保险柜

本文件规定了混凝土防火保险柜的分类和命名、技术要求、试验方法、检验规则、标志、包装、运输和贮存。

Concrete fireproof safe

24/30462470 DC BS EN 14135 覆盖物 防火能力的测定

BS EN 14135 Covering - Determination of fire protection ability

24/30468866 DC BS ISO 834-7 耐火测试 建筑结构要素 第7部分：柱的具体要求

BS ISO 834-7 Fire-resistance tests - Elements of building construction - Part 7: Specific requirements for columns

24/30461689 DC BS ISO 22899-3 被动防火材料抗喷射火性能的测定 第3部分：扩展测试要求

BS ISO 22899-3 Determination of the resistance to jet fires of passive fire protection materials - Part 3: extended test requirements