13.240 过压保护 标准查询与下载
共找到 211 条与 过压保护 相关的标准，共 15 页
This part of this standard contains data, which is common to more than one of the parts of this standard to avoid unnecessary repetition.This part is referenced inThe other parts of this standard where appropriate.
Safety devices for protection against excessive pressure - Part 7: Common data ISO 4126-7:2004
- ICS
- 13.240
- CCS
- 发布
- 2004-02-01
- 实施
This Part of this standard contains data, which is common to more than one of the parts of this standard to avoid unnecessary repetition. This part is referenced in the other parts of this standard where appropriate.
Safety devices for protection against excessive pressure - Part 7: Common data
- ICS
- 13.240
- CCS
- J16
- 发布
- 2004-02
- 实施
This part of this European Standard specifies general requirements for pilot operated safety valves, other than those covered in Part 1, irrespective of the fluid for which they are designed. In all cases, the operation is carried out by the fluid in the system to be protected. It is applicable to pilot operated safety valves having a valve flow diameter of 6 mm and above which are for use at set pressures of 0,1 bar gauge and above. No limitation is placed on temperature. This is a product standard and it is not concerned with applications for pilot operated safety valves.
Safety devices for protection against excessive pressure - Part 4: Pilot-operated safety valves
- ICS
- 13.240
- CCS
- J16
- 发布
- 2004-02
- 实施
This part of this European Standard specifies general requirements for safety valves irrespective of the fluid for which they are designed. It is applicable to safety valves having a flow diameter of 6 mm and above which are for use at set pressures of 0,1 bar gauge and above. No limitation is placed on temperature. This is a product standard and is not concerned with applications for safety valves.
Safety devices for protection against excessive pressure - Part 1: Safety valves
- ICS
- 13.240
- CCS
- J16
- 发布
- 2004-02
- 实施
This standard gives guidance on the application, selection and installation of bursting disc safety devices used to protect pressure equipment from excessive pressure and/or excessive vacuum. Annex A provides a checklist for the information to be supplied by the purchaser to the manufacturer. Annex B gives guidance on the replacement period of a bursting disc and annex C guidance on determining the mass flow rate, for single phase fluids, of a pressure relief system that contains a bursting disc safety device Annex E is a non-mandatory procedure for establishing the flow resistance of a burst bursting disc assembly. The requirements for the manufacture, inspection, testing, marking, certification and packaging of bursting disc safety devices are given in Part 2 of EN ISO 4126.
Safety devices for protection against excessive pressure - Application, selection and installation of bursting disc safety devices
- ICS
- 13.240
- CCS
- J16
- 发布
- 2004-01-07
- 实施
- 2004-01-07
Safety devices for protection against excessive pressure - Part 2: Bursting disc safety devices (ISO 4126-2:2003)
- ICS
- 13.240
- CCS
- 发布
- 2003-12-29
- 实施
- 2003-12-29
Bursting discs and bursting disc devices
- ICS
- 13.240
- CCS
- 发布
- 2003-12-15
- 实施
This standard gives guidance on the application, selection and installation of bursting disc safety devices used to protect pressure equipment from excessive pressure and/or excessive vacuum. Annex A provides a checklist for the information to be supplied by the purchaser to the manufacturer. Annex B gives guidance on the replacement period of a bursting disc and annex C guidance on determining the mass flow rate, for single phase fluids, of a pressure relief system that contains a bursting disc safety device Annex E is a non-mandatory procedure for establishing the flow resistance of a burst bursting disc assembly. The requirements for the manufacture, inspection, testing, marking, certification and packaging of bursting disc safety devices are given in Part 2 of EN ISO 4126.
Safety devices for protection against excessive pressure - Part 6: Application, selection and installation of bursting disc safety devices
- ICS
- 13.240
- CCS
- J16
- 发布
- 2003-12
- 实施
Safety devices for protection against excessive pressure - Part 2 : bursting disc safety devices.
- ICS
- 13.240
- CCS
- J15
- 发布
- 2003-08-01
- 实施
- 2003-08-05
This part of this standard specifies the requirements for bursting disc safety devices. It includes the requirements for the design, manufacture, inspection, testing, certification, marking and packaging.
Safety devices for protection against excessive pressure - Part 2: Bursting disc safety devices
- ICS
- 13.240
- CCS
- 发布
- 2003-06-10
- 实施
- 2003-04-25
Safety devices for protection against excessive pressure - Part 2: Bursting disc safety devices (ISO 4126-2:2003); German version EN ISO 4126-2:2003
- ICS
- 13.240
- CCS
- K35
- 发布
- 2003-05
- 实施
This part of this European Standard specifies the requirements for bursting disc safety devices. It includes the requirements for the design, manufacture, inspection, testing, certification, marking, and packaging. The requirements for the application, selection and installation of bursting disc safety devices are given in Part 6 of this European Standard.
Safety devices for protection against excessive pressure - Part 2:Bursting disc safety devices
- ICS
- 13.240
- CCS
- J16
- 发布
- 2003-02-10
- 实施
- 2003-02-10
Safety devices for protection against excessive pressure ?Part 2: Bursting disc safety devices Incorporating corrigendam September 2004 and July 2006
- ICS
- 13.240
- CCS
- 发布
- 2003-01-01
- 实施
This part of this European Standard specifies the requirements for bursting disc safety devices. It includes the requirements for the design, manufacture, inspection, testing, certification, marking, and packaging. The requirements for the application, selection and installation of bursting disc safety devices are given in Part 6 of this European Standard.
Safety devices for protection against excessive pressure - Part 2: Bursting disc safety devices
- ICS
- 13.240
- CCS
- J16
- 发布
- 2003-01
- 实施
Safety devices for protection against excessive pressure - Part 6: Application, selection and installation of bursting disc safety ISO 4126-6:2003
- ICS
- 13.240
- CCS
- 发布
- 2003
- 实施
この規格は，圧力容器，配管系，ダクトなどの密閉された装置が過剰圧力又は負圧によって破損することを防止するために設ける，破裂板，ホルダ，バキュームサポートなどの附属書で構成された安全装置(以下，破裂板式安全装置という。)について規定する。
Bursting discs and bursting disc assemblies
- ICS
- 13.240
- CCS
- K41
- 发布
- 2000-07-20
- 实施
この規格は，円筒コイルばねによる直動式の蒸気用ばね安全弁及びガス用ばね安全弁(以下，特に蒸気用又はガス用の用途の区別を必要としない場合は，安全弁という。)について規定する。ただし，次に示すものは含まない。
Steam boilers and pressure vessels -- Spring loaded safety valves
- ICS
- 13.240
- CCS
- J16
- 发布
- 1994-02-01
- 实施
この規格は，蒸気用及びガス用の安全弁(以下，安全弁という。)の吹出し係数測定方法について規定し，次の安全弁に適用する。
Safety valves -- Measuring methods for coefficient of discharge
- ICS
- 13.240
- CCS
- J16
- 发布
- 1993-10-01
- 实施
Industrial valves. Safety valves. Examples for flowrate calculation of safety valves types S,G1,L1 and L2.
- ICS
- 13.240
- CCS
- J16
- 发布
- 1992-04-01
- 实施
- 1992-04-05
