13.240 过压保护 标准查询与下载

DIN EN ISO 4126-6:2014 过压保护安全设备.第6部分:安全隔板的应用、选择和安装(ISO 4126-6-2014);德文版本EN ISO 4126-6-2014

Safety devices for protection against excessive pressure - Part 6: Application, selection and installation of bursting disc safety devices (ISO 4126-6:2014); German version EN ISO 4126-6:2014

DB36/ 789-2014 钢制压力管道超声导波检测方法

Ultrasonic guided wave testing method for steel pressure pipelines

ISO 4126-6:2014 过压保护安全设备.第6部分:防爆板安全设备的应用、选择和安装

This International standard gives guidance on the application, selection and installation of bursting disc safety devices used to protect pressure equipment from excessive pressure and/or excessive vacuum. Annex A provides a checklist for the information to be supplied by the purchaser to the manufacturer. Annex B gives guidance on the replacement period of a bursting disc. Annex C provides guidance for determining the discharge capacity, for single phase fluids, of a pressure relief system that contains a bursting disc safety device. Annex D is a non-mandatory procedure for establishing the flow resistance of a burst bursting disc assembly. Annex E is a non-mandatory procedure for type testing of bursting disc safety devices. Annex F provides typical performance characteristics for various bursting disc safety device types. The requirements for the manufacture, inspection, testing, marking, certification and packaging of bursting disc safety devices are given in ISO 4126-2.

Safety devices for protection against excessive pressure - Part 6: Application, selection and installation of bursting disc safety devices

EN ISO 4126-6:2014 过压保护安全设备.第6部分:安全隔板的应用,选择和安装

Diese Internationale Norm enthalt Leitlinien fur die Anwendung, die Auswahl und den Einbau von Berstscheibeneinrichtungen, die zum Schutz von Druckgeraten gegen unzulassigen Uber- und/oder Unterdruck eingesetzt werden. Anhang A enthalt eine Checkliste mit den Angaben, die der Kaufer dem Hersteller zur Verfugung stellen muss. Anhang B enthalt Leitlinien zur Bestimmung des Zeitraums bis zum Austausch einer Berstscheibe. Anhang C enthalt Leitlinien zur Bestimmung der Abblaseleistung einer Druckentlastungseinrichtung, die eine Berstscheibeneinrichtung enthalt (bei einphasigen Medien (Fluiden)). Anhang D ist ein nicht verbindlich vorgeschriebenes Verfahren zur Bestimmung des Stromungswiderstandes einer Berstscheibeneinheit. Anhang E ist ein nicht verbindlich vorgeschriebenes Verfahren fur die Bauartprufung von Berstscheiben- einrichtungen. Anhang F enthalt typische Leistungsmerkmale fur verschiedene Bauarten von Berstscheibeneinrichtungen. Die Anforderungen an die Herstellung, Uberwachung, Prufung, Kennzeichnung, Zertifizierung und Verpackung von Berstscheibeneinrichtungen sind in EN ISO 4126-2 enthalten.

Safety devices for protection against excessive pressure - Part 6: Application, selection and installation of bursting disc safety devices (ISO 4126-6:2014)

GSO ISO 4126-9:2013 超压保护安全装置 第9部分：安全装置的应用和安装 但残余（独立）爆破片安全装置除外

This part of ISO 4126 covers the application and installations of safety devices such as safety valves, safety valves and bursting disc safety devices in combination, pilot-operated safety valves and controlled safety pressure-relief systems for the protection of pressure equipment. ISO 4126-6 covers the selection, application and installation of bursting disc safety devices. This part of ISO 4126 describes the normative requirements for applications and installations of safety devices to protect static pressure equipment. The information contained in this part of ISO 4126 assumes single-phase flow of the fluid discharged from the safety device. ISO 4126-10 provides guidance specific to two-phase flow conditions. Equipment connected together in a system by piping of adequate capacity, which is free from potential blockages and does not contain any valve that can isolate any part, can be considered to be a safety system for the application of pressure relief. This part of ISO 4126 does not deal with other safety devices, such as safety related monitoring, control and regulation devices and other limiting devices allowed by some national regulations.

Safety devices for protection against excessive pressure -- Part 9: Application and installation of safety devices excluding stand-alone bursting disc safety devices

GSO ISO 4126-10:2013 超压保护安全装置 第10部分：气/液两相流安全阀的选型

This part of ISO 4126 specifies the sizing of safety valves for gas/liquid two-phase flow in pressurized systems such as reactors, storage tanks, columns, heat exchangers, piping systems or transportation tanks/containers. The possible fluid states at the safety valve inlet that can result in two-phase flow are given in Table 1. NOTE The expression “safety valve” is a synonym for valves as described in ISO 4126-1, ISO 4126-4 and ISO 4126-5.

Safety devices for protection against excessive pressure -- Part 10: Sizing of safety valves for gas/liquid two-phase flow

DIN EN ISO 4126-7:2013 过压保护安全设备. 第7部分: 通用数据(ISO 4126-7-2013); 德文版本EN ISO 4126-7-2013

Safety devices for protection against excessive pressure - Part 7: Common data (ISO 4126-7:2013); German version EN ISO 4126-7:2013

DIN EN ISO 4126-1:2013 过压保护安全设备.第1部分:安全阀(ISO 4126-1-2013).德文版本EN ISO 4126-1-2013

Safety devices for protection against excessive pressure - Part 1: Safety valves (ISO 4126-1:2013); German version EN ISO 4126-1:2013

DIN EN ISO 4126-4:2013 过压保护安全设备.第4部分:先导式安全阀(ISO 4126-4-2013).德文版本EN ISO 4126-4-2013

Safety devices for protection against excessive pressure - Part 4: Pilot operated safety valves (ISO 4126-4:2013); German version EN ISO 4126-4:2013

DIN EN ISO 4126-5:2013 防超压安全装置. 第5部分:受控安全泄压系统 (CSPRS) (ISO 4126-5-2013); 德文版本EN ISO 4126-5-2013

Safety devices for protection against excessive pressure - Part 5: Controlled safety pressure relief systems (CSPRS) (ISO 4126-5:2013); German version EN ISO 4126-5:2013

LST EN ISO 4126-1:2013 防过压安全装置. 第1部分: 安全阀(ISO 4126-1-2013)

Safety devices for protection against excessive pressure - Part 1: Safety valves (ISO 4126-1:2013)

LST EN ISO 4126-5:2013 防过压安全装置. 第5部分: 受控安全泄压系统(CSPRS)(ISO 4126-5-2013)

Safety devices for protection against excessive pressure - Part 5: Controlled safety pressure relief systems (CSPRS) (ISO 4126-5:2013)

KS B ISO 6718-2013 爆破片和爆破片装置

Bursting discs and bursting disc devices

KS B ISO 6718:2013 安全隔板和安全隔板装置

Bursting discs and bursting disc devices

NF E29-417-5*NF EN ISO 4126-5:2013 过压保护安全设备.第5部分:可控安全减压系统(CSPRS)

Safety devices for protection against excessive pressure - Part 5: controlled safety pressure-relief systems (CSPRS)

DS/EN ISO 4126-5:2013 防止过压的安全装置 第5部分：受控安全泄压系统（CSPRS）

This part of this European Standard specifies the requirements for Controlled Safety Pressure Relief Systems irrespective of the fluid for which they are designed. It is applicable for main valves having a flow diameter of 6 mm and above which are for use

Safety devices for protection against excessive pressure - Part 5: Controlled safety pressure relief systems (CSPRS)

DS/EN ISO 4126-7:2013 防止过压的安全装置 第7部分：通用数据

This Part of this standard contains data, which is common to more than one of the parts of this standard to avoid unnecessary repetition. This part is referenced in the other parts of EN ISO 4126 where appropriate.

Safety devices for protection against excessive pressure - Part 7: Common data

DS/EN ISO 4126-4:2013 防止过压的安全装置 第4部分：先导式安全阀

This part of this European Standard specifies general requirements for pilot operated safety valves, other than those covered in Part 1, irrespective of the fluid for which they are designed. In all cases, the operation is carried out by the fluid in the

Safety devices for protection against excessive pressure - Part 4: Pilot-operated safety valves

DS/EN ISO 4126-1:2013 防止过压的安全装置 第1部分：安全阀

This part of this European Standard specifies general requirements for safety valves irrespective of the fluid for which they are designed. It is applicable to safety valves having a flow diameter of 6 mm and above which are for use at set pressures of 0,

Safety devices for protection against excessive pressure - Part 1: Safety valves

BS EN ISO 4126-5:2013 过压保护安全设备. 受控安全泄压系统(CSPRS)

Safety devices for protection against excessive pressure. Controlled safety pressure relief systems (CSPRS)