13.240 过压保护 标准查询与下载

ISO 4126-5:2004/Cor 1:2006 过压保护安全设备.第5部分:可控安全减压系统(CSPRS).技术勘误1

This is Technical Corrigendum 1 to ISO 4126-5-2004 (Safety devices for protection against excessive pressure — Part 5: Controlled safety pressure relief systems (CSPRS) )

Safety devices for protection against excessive pressure - Part 5: Controlled safety pressure relief systems (CSPRS); Technical Corrigendum 1

LST EN ISO 4126-3:2006 防止过压的安全装置 第3部分：组合安全阀和爆破片安全装置（ISO 4126-3:2006）

Safety devices for protection against excessive pressure - Part 3: Safety valves and bursting disc safety devices in combination (ISO 4126-3:2006)

DS/EN ISO 4126-3:2006 过压保护安全装置第3部分：组合式安全阀和爆破片安全装置

This part of this standard specifies the requirements for a product assembled from the in-series combination of safety valves or CSPRS (controlled safety pressure relief systems) according to EN ISO 4126-1, EN ISO 4126-4 and EN ISO 4126-5 and the bursting disc safety devices according to EN ISO 4126-2 installed within no more than five pipe diameters from the valve inlet.

Safety devices for protection against excessive pressure – Part 3: Safety valves and bursting disc safety devices in combination

NF E29-417-3:2006 过压保护安全设备.第3部分:组合中防爆板安全设备和安全阀门

Safety devices for protection against excessive pressure - Part 3 : safety valves and bursting disc safety devices in combination.

ISO 4126-3:2006 过压保护安全设备.第3部分:组合中防爆板安全设备和安全阀门

This part of ISO 4126 specifies the requirements for a product assembled from the in-series combination of safety valves or CSPRS (controlled safety pressure relief systems) according to ISO 4126-1, ISO 4126-4 and ISO 4126-5, and bursting disc safety devices according to ISO 4126-2 installed within no more than five pipe diameters from the valve inlet. It specifies the design, application and marking requirements for such products, which are used to protect pressure vessels, piping or other enclosures from excessive pressure, and which comprise the bursting disc safety device, a safety valve or CSPRS and, where applicable, a short length of connecting pipe or spool piece. In addition, it gives a method for establishing the combination discharge factor used in sizing combinations.

Safety devices for protection against excessive pressure - Part 3: Safety valves and bursting disc safety devices in combination

NF E29-417-6:2004 过压保护安全设备.第6部分:防爆板安全设备的应用、选择和安装

Safety devices for protection against excessive pressure - Part 6 : application, selection and installation of bursting disc safety devices.

LST EN ISO 4126-1:2004 防止过压的安全装置 第1部分：安全阀（ISO 4126-1:2004）

Safety devices for protection against excessive pressure - Part 1: Safety valves (ISO 4126-1:2004)

LST EN ISO 4126-4:2004 防止过压的安全装置 第4部分：先导式安全阀（ISO 4126-4:2004）

Safety devices for protection against excessive pressure - Part 4: Pilot operated safety valves (ISO 4126-4:2004)

LST EN ISO 4126-5:2004 防止过压的安全装置 第5部分：受控安全泄压系统（CSPRS）（ISO 4126-5:2004）

Safety devices for protection against excessive pressure - Part 5: Controlled safety pressure relief systems (CSPRS) (ISO 4126-5:2004)

LST EN ISO 4126-6:2004 防止过压的安全装置 第6部分：爆破片安全装置的应用、选择和安装（ISO 4126-6:2003）

Safety devices for protection against excessive pressure - Part 6: Application, selection and installation of bursting disc safety devices (ISO 4126-6:2003)

LST EN ISO 4126-7:2004 防止过压的安全装置 第7部分：通用数据（ISO 4126-7:2004）

Safety devices for protection against excessive pressure - Part 7: Common data (ISO 4126-7:2004)

DS/EN ISO 4126-6:2004 防止过压的安全装置 第6部分：爆破片安全装置的应用、选择和安装

This standard gives guidance on the application, selection and installation of bursting disc safety devices used to protect pressure equipment from excessive pressure and/or excessive vacuum.

Safety devices for protection against excessive pressure - Part 6: Application, selection and installation of bursting disc safety devices

BS EN ISO 4126-4:2004 过压保护安全设备.由伺服电动机控制的安全阀

This part of this European Standard specifies general requirements for pilot operated safety valves, other than those covered in Part 1, irrespective of the fluid for which they are designed. In all cases, the operation is carried out by the fluid in the system to be protected. It is applicable to pilot operated safety valves having a valve flow diameter of 6 mm and above which are for use at set pressures of 0,1 bar gauge and above. No limitation is placed on temperature. This is a product standard and it is not concerned with applications for pilot operated safety valves.

Safety devices for protection against excessive pressure - Part 4:Pilot operated safety valves

BS EN ISO 4126-7:2003 过压保护安全设备.通用数据

This Part of this standard contains data, which is common to more than one of the parts of this standard to avoid unnecessary repetition. This part is referenced in the other parts of this standard where appropriate.

Safety devices for protection against excessive pressure — Part 7: Common data

BS EN ISO 4126-7:2004 过压保护安全设备.通用数据

This Part of this standard contains data, which is common to more than one of the parts of this standard to avoid unnecessary repetition. This part is referenced in the other parts of this standard where appropriate.

Safety devices for protection against excessive pressure - Common data

BS EN ISO 4126-5:2004 过压保护安全设备.第5部分:可控安全性减压系统

This part of this Standard specifies the requirements for Controlled Safety Pressure Relief Systems irrespective of the fluid for which they are designed. It is applicable for main valves having a flow diameter of 6 mm and above which are for use at pressures of 0,1 bar gauge and above. No limitation is placed on temperature. This is a product standard and is not concerned with applications.

Safety devices for protection against excessive pressure - Part 5:Controlled safety pressure relief systems

DIN EN ISO 4126-6:2004 过压保护安全设备.第6部分:安全隔板的应用、选择和安装

Safety devices for protection against excessive pressure - Part 6: Application, selection and installation of bursting disc safety devices (ISO 4126-6:2003); German version EN ISO 4126-6:2003

EN ISO 4126-5:2004 过压保护安全设备.第5部分:可控安全减压系统(CSPRS)ISO 4216-5-2004

This part of this European Standard specifies the requirements for Controlled Safety Pressure Relief Systems irrespective of the fluid for whichThey are designed.

Safety devices for protection against excessive pressure - Part 5: Controlled safety pressure relief systems (CSPRS) ISO 4216-5:2004

ISO 4126-5:2004 过压保护安全设备.第5部分:可控安全减压系统(CSPRS)

This part of this European Standard specifies the requirements for Controlled Safety Pressure Relief Systems irrespective of the fluid for which they are designed. It is applicable for main valves having a flow diameter of 6 mm and above which are for use at pressures of 0,1 bar gauge and above. No limitation is placed on temperature. This is a product standard and is not concerned with applications.

Safety devices for protection against excessive pressure - Part 5: Controlled safety pressure relief systems (CSPRS)

EN ISO 4126-4:2004 过压保护安全设备.第4部分:先导式安全阀ISO 4126-4-2004

This part of this European Standard specifies general requirements for pilot operated safety valves, other thanthose covered in Part 1,irrespective of the fluid for whichThey are designed. In all cases,The operation is carriedout byThe fluid inThe system to be protected.It is applicable to pilot operated safety valves having a valve flow diameter of 6 mm and above which are for use atset pressures of 0,1 bar gauge and above. No limitation is placed on temperature.This is a product standard and it is not concerned with applications for pilot operated safety valves.

Safety devices for protection against excessive pressure - Part 4: Pilot operated safety valves ISO 4126-4:2004