13.340.10 防护服装 标准查询与下载

24/30466225 DC BS ISO 21942:2019/Amd 1 消防员消防站制服 修改件1

BS ISO 21942:2019/Amd 1 Station uniform for firefighters - Amendment 1

24/30480914 DC BS EN 17353:2020/A1 防护服 用于中等风险情况的增强能见度设备 测试方法和要求

BS EN 17353:2020/A1 Protective clothing - Enhanced visibility equipment for medium risk situations - Test methods and requirements

KS K ISO 13982-1-2023 防固体颗粒防护服第1部分:对全身提供防空气传播固体颗粒防护的化学防护服的性能要求（5型防护服）

Protective clothing for use against solid particulates — Part 1: Performance requirements for chemical protective clothing providing protection to the full body against airborne solid particulates (ty

KS K ISO 13997-2023 防护服机械性能耐尖锐物体切割性的测定

Protective clothing — Mechanical properties — Determination of resistance to cutting by sharp objects

KS K ISO 13994-2023 液体化学品防护服防护服材料耐压性的测定

Clothing for protection against liquid chemicals — Determination of the resistance of protective clothing materials to penetration by liquids under pressure

KS K ISO 13982-2-2023 防固体颗粒防护服第2部分:测定细颗粒气溶胶向内泄漏的试验方法

Protective clothing for use against solid particulates — Part 2: Test method of determination of inward leakage of aerosols of fine particles into suits

KS K ISO 14116-2023 防护服火焰防护有限火焰传播材料、材料组件和防护服

Protective clothing — Protection against flame — Limited flame spread materials, material assemblies and clothing

KS K ISO 22608-2023 防护服.液体化学品防护.液体农药制剂通过防护服材料的排斥性、滞留性和渗透性的测量

Protective clothing — Protection against liquid chemicals — Measurement of repellency, retention, and penetration of liquid pesticide formulations through protective clothing materials

KS K ISO 13688-2023 防护服一般要求

Protective clothing — General requirements

KS K ISO 11999-3-2023 消防员的个人防护装备.在建筑物内灭火时有暴露于高温和/或火焰风险的消防员所用个人防护装备的试验方法和要求.第3部分:服装

PPE for firefighters — Test methods and requirements for PPE used by firefighters who are at risk of exposure to high levels of heat and/or flame while fighting fires occurring in structures — Part 3:

23/30463703 DC BS ISO 11999-3 消防员个人防护装备 在扑灭建筑物内发生的火灾时面临暴露于高热和/或火焰风险的消防员所使用的个人防护装备的测试方法和要求 第3部分：服装

BS ISO 11999-3 PPE for firefighters. Test methods and requirements for PPE used by firefighters who are at risk of exposure to high levels of heat and/or flame while fighting fires occurring in structures - Part 3. Clothing

T/CASME 873-2023 防护服装 阻燃防静电服

本文件规定了防护服装 阻燃防静电服的技术要求、试验方法、检验规则、标识、包装和存储等。

Protective clothing—Flame retardant anti-static clothing

ASTM F1414-19(2023) 测量下体（腿）防护服中电锯切割阻力的标准试验方法

Standard Test Method for Measurement of Cut Resistance to Chainsaw in Lower Body (Legs) Protective Clothing

ISO/CD 9185:2023 防护服 评估材料对熔融金属飞溅的抵抗力

Protective clothing — Assessment of resistance of materials to molten metal splash

ASTM F2675/F2675M-23 电弧闪光防护用手工防护产品电弧额定值测定的标准试验方法

1.1 This test method is used to determine the arc rating of hand protective products in the form of gloves, glove materials, glove material systems, or other protective products designed to fit on the hand and specifically intended for electric arc flash protection use as protective accessories for workers exposed to electric arcs. The arc rating is determined in the test with an arc that has a heat flux value of 2100 kW/m2 [50 cal/cm2 /s]. 1.2 This test method will determine the arc rating of hand protective products made of materials that meet the following requirements for flame resistance: less than 150 mm [6 in.] char length, less than 2 s afterflame and no melt and drip when tested in accordance with Test Method D6413, receive a reported 50 % probability of ignition of a material or flammable underlayer (see definition of ignition50) by this method, or that have been evaluated and pass the ignition withstand requirements of this test method. 1.2.1 It is the intent of this test method to be used for hand protective products that are flame resistant or that have an adequate flame resistance for the required hazard (see 1.2). Non-flame resistant hand protective products may be used as under layers in multiple-layer systems or tested for ignition probability or ignition withstand. 1.2.2 Hand protective products tested by this test method are new and ratings received by this method may be reduced or eliminated by hydrocarbon loading (gasoline, diesel fuel, transformer oil, etc.), sweat, dirt, grease, or other contaminants. The end user takes responsibility for use of hand protective products tested by this method when contaminated in such a manner that could reduce or eliminate the arc rating of the hand protective products. 1.2.3 This test method is designed to provide information for gloves used for electric arc protection only. This test method is not suitable for determining electrical protective properties of hand protective products. 1.3 This test method is used to measure and describe the properties of hand protective products in response to convective and radiant energy generated by an electric arc under controlled laboratory conditions. 1.4 This test method does not apply to electrical contact or electrical shock hazards. 1.5 The values stated in either SI units or inch-pound units are to be regarded separately as standard. The values stated in each system are not necessarily exact equivalents; therefore, to ensure conformance with the standard, each system shall be used independently of the other, and values from the two systems shall not be combined 1.6 This standard shall not be used to describe or appraise the fire hazard or fire risk of materials, products, or assemblies under actual fire conditions. However, results of this test may be used as elements of a fire assessment that takes into account all of the factors, which are pertinent to an assessment of the fire hazard of a particular end use. 1.7 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. For specific precautions, see Section 7. 1.8 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Test Method for Determining Arc Ratings of Hand Protective Products Developed and Used for Electrical Arc Flash Protection

ISO/CD 11999-2:2023 消防员个人防护装备 - 在扑灭建筑物内发生的火灾时面临暴露于高热和/或火焰风险的消防员使用的个人防护装备的测试方法和要求 - 第 2 部分：兼容性

PPE for firefighters — Test methods and requirements for PPE used by firefighters who are at risk of exposure to high levels of heat and/or flame while fighting fires occurring in structures — Part 2: Compatibility

ISO/DIS 11999-3:2023 消防员个人防护装备 在扑灭结构中发生的火灾时面临暴露于高热和/或火焰风险的消防员使用的个人防护装备的测试方法和要求 第 3 部分：服装

PPE for firefighters — Test methods and requirements for PPE used by firefighters who are at risk of exposure to high levels of heat and/or flame while fighting fires occurring in structures — Part 3: Clothing

ISO/DTR 21808:2023 旨在为消防员提供保护的个人防护装备 (PPE) 的选择和使用指南

Guidance on the selection and use of personal protective equipment (PPE) designed to provide protection for firefighters

23/30463755 DC BS ISO 17491-5 防护服 化学品防护服装的测试方法 第5部分：液体喷雾抗渗透性的测定（人体模型喷雾测试）

BS ISO 17491-5. Protective clothing. Test methods for clothing providing protection against chemicals - Part 5. Determination of resistance to penetration by a spray of liquid (manikin spray test)

23/30462737 DC BS EN ISO 14116 防护服 防火保护 火焰蔓延有限的材料、材料组件和服装

BS EN ISO 14116. Protective clothing. Protection against flame. Limited flame spread materials, material assemblies and clothing