13.340.20 头部防护设备 标准查询与下载

ASTM F2178-17(2017) 表面保护产品电弧额定值测定的标准试验方法

1.1 This test method and product specification is used to measure the arc rating and specify the requirements for products intended for use as eye or face protection for workers exposed to electric arcs that would generate heat flux values from 84 to 25 120 kW ⁄m2 [2 to 600 cal/cm2 s]. Products are tested as sold. 1.2 This test method determines an arc rating for eye or face protective products. The faceshield, safety spectacle, goggle or or other applicable portions of the complete product must meet ANSI Z87.1. This excludes the textile or non ANSI Z87.1 testable parts of the hood assemblies or other tested products. This standard does not measure optical and impact properties (see ANSI Z87.1) but does specify requirements for optical and impact properties. 1.3 The materials covered by this standard are in the form of faceshields attached to the head by protective helmets (hard hats), headgear, hood assemblies, safety spectacles or goggles. Faceshields, safety spectacles or goggles are tested with or without other face and head protective products, for example, sock hoods, balaclavas, sweat shirt hoods or jacket hoods. 1.3.1 Fabric layers used in hood assemblies or other items tested under this standard shall meet the requirements of Specification F1506. 1.4 This test method shall be used to measure and describe the properties of materials, products, or assemblies in response to convective and radiant energy generated by an electric arc under controlled laboratory conditions and does not purport to predict damage from light other than the thermal aspects measured. 1.5 The values stated in SI units shall be regarded as standard except as noted. Within the text, alternate units are shown in brackets. The values stated in each system may not be exact equivalents; therefore, alternate systems must be used independently of the other. Combining values from the systems described in the text may result in nonconformance with the method. 1.6 This standard does not purport to describe or appraise the effect of the electric arc fragmentation explosion and subsequent molten metal splatter, which involves the pressure wave containing molten metals and possible fragments of other materials except to the extent that heat energy transmission due to these arc explosion phenomena is reduced by test specimens. 1.7 This standard shall not be used to describe or appraise the fire hazard or fire risk of materials, products, or assemblies under actual fire conditions. However, results of this test may be used as elements of a fire assessment which takes into account all of the factors which are pertinent to an assessment of the fire hazard of a particular end use. 1.8 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health and environmental practices and determine the applicability of regulatory limitations prior to use.For specific precautions, see Section 7. 1.9 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Test Method for Determining The Arc Rating Of Face Protective Products

GOST R ISO 10256-2017 冰球用头部和面部防护设备. 安全要求和试验方法

Equipment for the protection of head and face for use in ice hockey. Safety requirements and test methods

GSO ISO 6161:2016 个人护眼器 针对激光辐射的滤光器和护眼器

Specifies requirements for spectacle filters and protectors within the spectral region 0,2 to 1000 micron. The work, which was staggered over several years, represents a basic study for which a majority consensus was reached at the international level. To take account of new developments and knowledge relating to lasers a revision of this standard will be undertaken.

Personal eye-protectors -- Filters and eye-protectors against laser radiation

EN ISO 10256-1:2016 武术防护设备,第1部分:一般要求和试验方法

Dieser Teil der ISO 10256 legt allgemeine Anforderungen für Kopf-, Gesichts-, Hals- und Körperschützer (nachstehend als Schützer bezeichnet) zum Gebrauch beim Eishockey fest. Dieser Teil der ISO 10256 ist lediglich für Schützer zum Gebrauch beim Eishockey vorgesehen. Für die folgenden Punkte sind Anforderungen angegeben: a) Begriffe; b) Unschädlichkeit; c) Ergonomie; d) Prüfbericht; e) dauerhafte Kennzeichnungen; f) Benutzerinformation. In der Normenreihe ISO 10256 legen Ergänzungsnormen Leistungsanforderungen an Schützer zum Gebrauch beim Eishockey fest und sind vorgesehen, zusammen mit diesem Teil von ISO 10256 gelesen zu werden. ANMERKUNG 1 Die in einem Abschnitt angegebenen Anforderungen haben Vorrang vor einem Bild. ANMERKUNG 2 Der Zweck ist die Verringerung des Risikos von Verletzungen eines Eishockeyspielers, ohne die Form oder die Attraktivität des Spiels zu beeinflussen. Diese Normen setzen voraus, dass die Spielregeln für Eishockey von den Spielern befolgt und von Schiedsrichtern durchgesetzt werden.

Protective equipment for use in ice hockey - Part 1: General requirements

ASTM F1776-16 彩弹运动眼部防护装置标准规范

1.1 This specification applies to eye, face, and head protective devices, designed for use by players of the sport of paintball, which minimize or significantly reduce injury to the eye, adnexa of eye, face, and head due to paintball impact or penetration, or both. 1.2 EHPDs by nature provide three types of protection. The first type of protection is for the eyes and adnexa of eye and not necessarily for any other parts of the face or head. The second type of protection adds coverage for the ears and face. The third type of coverage adds cranial coverage in addition to that provided to types II and III. These coverage types are defined in Section 8. 1.3 This specification does not limit the wearing of eyeglasses or contact lenses when used in conjunction with the EHPD. 1.4 The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only. 1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Specification for Eye Protective Devices for Paintball Sports

JIS T 8147:2016 个人护目器

Personal eye protectors

ASTM F1045-16e1 冰球头盔的标准性能规范

Standard Performance Specification for Ice Hockey Helmets

XP S72-600-2016 跳伞活动防护头盔

Protective helmets for parachuting activities

DIN EN 458:2016 听觉保护器.挑选、使用、保养和维修的建议.指导性文件.德文版本EN 458-2016

Hearing protectors - Recommendations for selection, use, care and maintenance - Guidance document; German version EN 458:2016

BS EN 458:2016 听力保护器 选择、使用、保养和维护的建议 指导文件

Hearing protectors. Recommendations for selection, use, care and maintenance. Guidance document

ANSI/ASTM F697:2016 运动护齿器的护理和使用标准规程

Standard Practice for Care and Use of Athletic Mouth Protectors

ASTM F697-16 护理和使用运动口保护器的标准做法

4.1 Intra-oral mouth protectors have been found usable and effective in all physical sports activities where mouth hazard exists. 4.2 Considerable evidence indicates that the use of mouth protectors reduces forces on dentition and can potentially mitigate orofacial injuries. 1.1 This practice covers the care and use of intraoral mouth protectors as protective equipment for sports. Mouth protectors includes what are commonly termed mouth guards. 1.2 Mouth protectors, as described herein, refer to either Type I, Type II, or Type III mouth protectors as classified in Section 3. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Practice for Care and Use of Athletic Mouth Protectors

EN 458:2016 听力保护器.选择,使用,护理和维护建议.指导文件

This European Standard gives recommendations for the selection, use, care and maintenance of hearing protectors.

Hearing protectors - Recommendations for selection@ use@ care and maintenance - Guidance document

GOST EN 13087-1-2016 职业安全标准系统. 防护头盔. 试验方法. 第1部分. 条件和调节

Occupational safety standards system. Protective helmets. Test methods. Part 1. Conditions and conditioning

ASTM F2400-16 撑杆跳头盔的标准规格

1.1 This specification covers performance requirements for helmets to be used in the activity of pole vaulting. 1.2 All testing and requirements of this specification are to be carried out in accordance with Test Methods F1446 except where noted in this specification. 1.3 Partial utilization of this specification is prohibited. Any statement of compliance with this specification shall be a certification that the product meets all of the requirements of the specification in their entirety. A product that fails to meet any one of the requirements of this specification is considered to have failed the specification and shall not be sold with any indication that it meets parts of the specification. 1.4 Helmets designed to comply with this and other standards may proclaim uses as certified by the manufacturer. 1.5 The values stated in SI units are to be regarded as the standard. 1.6 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Specification for Helmets Used in Pole Vaulting

GOST 12.4.309.2-2016 职业安全标准体系. 个人眼睛防护. 光学和非光学参数试验方法

Occupational safety standard system. Personal eye protection. Optical and non-optical parameters test methods

GOST 12.4.308-2016 职业安全标准体系. 个人眼部防护. 激光眼部防护器. 通用技术要求和试验方法

Occupational safety standards system. Personal eye-protection. Laser eye-protectors. General technical requirements and test methods

KS G ISO 4849:2015 个人用护目镜 技术要求

Personal eye-protectors－Specifications

KS G ISO 4849-2015(2020) 个人护目镜规范

Personal eye-protectors－Specifications

GSO ISO 12609-2:2015 用于美容和医疗目的的用于人和动物的强光源防护眼镜 第2部分：使用说明

  Scope is not provided for this standard

Eyewear for protection against intense light sources used on humans and animals for cosmetic and medical applications -- Part 2: Guidance for use