13.340.99 其他防护设备 标准查询与下载

T/JHGG 002-2022 核酸采样舱

通用要求、空间尺寸及偏差、性能要求、电气安全、防火阻燃、甲醛释放量、放射性核素限量、防水抗渗

Nucleic acid test cabin

ASTM C1695-22 热设备用可拆卸和可重复使用的柔性绝缘毯的制造标准规范

1.1 This specification addresses the minimum requirements for materials and fabrication of flexible removable and reusable blanket insulation for hot service, from above ambient temperatures to 1000°F (538°C). 1.2 This specification separately addresses industrial applications, outdoor commercial applications, and indoor commercial applications. Blanket insulation for industrial applications and outdoor commercial applications must be weather resistant and resistant to liquid chemicals. Blanket insulation for indoor commercial applications is limited to 500°F (260°C) maximum use temperature, is not required to be either weather resistant or resistant to chemicals, and is typically used for HVAC, plumbing, and other light grade indoor piping systems that distribute steam or water, or both. 1.3 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. 1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.5 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Specification for Fabrication of Flexible Removable and Reusable Blanket Insulation for Hot Service

T/SLEA 0031.2-2022 实验室用水气配件技术规范 第2部分：应急喷淋和洗眼设备

本文件规定了实验室用应急喷淋和洗眼设备实验室的术语和定义、分类、结构、要求、试验方法、检验规则、标志、包装、运输和贮存，并在附录中规定了选型指南、安装要求、人员培训、使用维护、故障排除、其他洗眼/洗脸设备等内容。 本文件适用于试验作业人员的眼部和身体在作业场所暴露于危险化学品等危害物质进行紧急冲洗处理的应急喷淋和洗眼设备。 (说明：标准中的CCS号是按照监管局系统中使用的"中国标准文献分类号"定的，本平台数据库中所用的分类号为2017版的国民经济行业分类号，两边系统中分类号不一致，在本平台中上传时，重新按照本平台的分类号选择的，故下载标准文本后会看到CCS号与在本系统中选择的分类号不一致的情况)

Technical requirements for laboratory water and gas fittings Part 2:Emergency shower and eyewash equipment

ASTM F1765-97a(2022) 冰杖自救技术的标准指南

1.1 This guide describes the self-rescue technique on ice utilizing an ice staff. 1.2 This guide is one in a series of self-rescue techniques for the ice rescuer. 1.3 Individuals who will operate in the cold water or ice rescue setting need to be aware of the equipment and physical requirements necessary to be able to perform all identified objectives and necessary skills in the setting. 1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Guide for Ice Staff Self-Rescue Technique

T/ZZB 2791-2022 防暴服

本文件规定了防暴服的术语和定义、 基本要求、 技术要求、试验方法、检验规则、 标志、 包装、运输和贮存及质量承诺。 本文件适用于防暴服的研发、生产、检验和验收。

Anti-riot suit

T/EERT 018-2021 金属抛光打磨用湿式除尘一体机

本文件规定了金属抛光打磨用湿式除尘一体机的分类与命名、技术要求、日常维护、检验方法、检验规则、标志和包装要求。

Wet dust collector for metalbuffingandmopping

KS K 0944-2021 防止侧面跌倒的髋部保护器 冲击减少率评价的试验方法

Hip protector against side fall — Test method for evaluation of impact reduction rate

BS 13700:2021 永久配重护栏系统 规格

Permanent counterweighted guardrail systems. Specification

GA 420-2021 警用防暴服

Police riot suit

STANAG 4810-2021 移动中的 CBRN 证明水合系统 AEP-4810 A 版

ON-THE-MOVE CBRN PROOF HYDRATION SYSTEM - AEP-4810 EDITION A

GA/T 1778-2021 警用训练手枪标识弹防护装具

Police training pistol marking bullet protective equipment

FORD WSS-M7H57-A1-2020 织带、安全带中等强度、低伸长***用于福特WSS-M99P1111-A***

WEBBINGS, SAFETY BELTS MEDIUM STRENGTH, LOW ELONGATION ***TO BE USED WITH FORD WSS-M99P1111-A***

ASTM C1695-20 热设备用可拆卸和可重复使用的柔性绝缘毯的制造标准规范

Standard Specification for Fabrication of Flexible Removable and Reusable Blanket Insulation for Hot Service

ASTM F1766-97a(2020) Ice Awls自救技术标准指南

1.1 This guide covers the self-rescue technique on ice utilizing the ice awl. 1.2 This guide is one of a series of self-rescue techniques for the ice rescuer. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Guide for Ice Awls Self-Rescue Technique

ASTM F1768-97(2020) 绳索救援行动中使用口哨信号的标准指南

1.1 This guide covers the methodology for the use of whistles as a means of communication during rope rescue operations. 1.2 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.3 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Guide for Using Whistle Signals During Rope Rescue Operations

T/CEC 280-2019 电力用智能安全带技术条件

本标准规定了电力用智能安全带的功能、性能、包装、运输和贮存等方面的技术要求。 本标准适用于电力行业高处作业的智能安全带。

Technical conditions for smart safety belts for electric power

GA/T 816-2019 警用阻截网

Police blocking net

ASTM C1695-19 热设备用可拆卸和可重复使用的柔性绝缘毯的制造标准规范

Standard Specification for Fabrication of Flexible Removable and Reusable Blanket Insulation for Hot Service

ASTM F2676-19 用于确定电弧危险的电弧保护毯的保护性能的标准测试方法

1.1 This test method is used to evaluate the ability of the arc protective blankets to withstand the effects of arc flash and arc blast in a configuration in which the blanket is hung or anchored near energized equipment. Specifically, this test method is used to determine the arc protective blanket’s (1) resistance to breakopen, (2) mechanical strength, and (3) ability to self-extinguish flames following a controlled arc exposure. 1.2 This method is used to determine the performance of arc protective blankets in terms of: maximum arc current level expressed in kA and BTP (BTP) expressed as the product of arc current in kA and arc duration in number of cycles to cause breakopen (kA*cycles). Cycles are on the basis of 60 Hz. 1.3 Blanket test specimens used in this test method are test size blankets of 152 6 5 cm (60 6 2 in.) by 122 6 5 cm (48 6 2 in.). The test specimen size is for testing purposes only. Commercially available arc protective blankets either larger or smaller than the test specimen size are covered by this standard. 1.4 The arc protective blankets described in this test method are made of flame-resistant materials and are available in varying sizes and configurations based on the application. 1.5 This test method shall be used to measure and describe the properties of materials, products, or assemblies in response to incident thermal (convective and radiant) and pressure energies generated by an electric arc under controlled laboratory conditions. 1.6 The values stated in SI units shall be regarded as standard. The values given in parentheses are mathematical conversion to inch-pound or other units commonly used for arc testing. 1.7 This standard shall not be used to describe or appraise the fire hazard or fire risk of materials, products, or assemblies under actual fire conditions. However, results of this test may be used as elements of a fire assessment, which takes into account all of the factors, which are pertinent to an assessment of the fire hazard of a particular end use. 1.8 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. For specific precautions, see Section 7. 1.9 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Test Method for Determining the Protective Performance of an Arc Protective Blanket for Electric Arc Hazards

GA 68-2019 警用防刺服

police stab proof clothing