17.020 计量学和测量综合 标准查询与下载

T/GERS 0029-2023 工业企业能源计量数据采集技术规范

本标准按照GB/T 1.1—2020的规定进行编写，相关内容经过了验证，具有较强的可操作性和科学性。根据调研情况、意见收集情况分析，确定标准的主要技术内容包括： 1.术语和定义。给出了能源计量、非生产用能、数据采集终端、能源数据中心、能源计量数据在线采集系统、能源消费量和持续改进的定义。 2.总则。明确了能源计量数据采集的基本要求、管理责任部门及人员、管理制度建设。 3.数据采集对象、参数和范围。明确了能源计量数据采集的对象、参数和范围，包括输入输出用能单位、次级用能单位和用能设备的能源及载能工质所对应的各类能源计量参数数据以及用能单位、次级用能单位和用能设备使用、自产和回收利用的能源及载能工质所对应的各类能源计量参数数据。 4.数据采集要求。明确了能源计量数据采集的通用要求、自动采集要求以及人工采集要求；对自动采集要求又细化了功能、数据采集点、通信网络、能源数据中心的要求。 5.数据采集记录。明确了能源计量数据的采集记录要求，包括记录填写、计算、归档、数据修正以及自动采集记录生成和打印的要求。 6.数据的核查和分析。明确了能源计量巡查、计量数据的核查和分析要求。 7.数据统计。明确了能源计量数据统计报表的生成、指标计算、在线采集生成报表、上报等的要求。 8.持续改进。明确了能源计量数据采集的数据分析评价、内部检查和评价、改进、纠正措施等。

Technical specification for energy measurement data collection in industrial enterprises

T/CI 143-2023 陡深型水库多波束测深技术规范

本文件规定了陡深型水库利用多波束测深系统进行水下地形测量的一般要求、测量要求、数据处理、资料检验和成果资料等相关要求。 本文件适用于陡深型水库的水下地形测量、障碍物探测等工作，湖泊、河流等水域测深可参照执行。

Technical specification for multibeam echosounder in steep-depth reservoir

DB3306/T 055-2023 加油站诚信计量服务规范

Gas Station Integrity Measurement Service Specifications

GSO OIML R150-1:2023 拱形溜槽式连续累加自动衡器 第1部分：计量技术要求

This International Recommendation specifies the metrological and technical requirements for arched chute weighers, that are subject to national metrological control.

Continuous totalising automatic weighing instruments of the arched chute type - Part 1: Metrological and technical requirements

GSO OIML R 149-2:2023 无创自动血压计 第2部分：测试程序

  Scope is not provided for this standard

Non-invasive automated sphygmomanometers Part 2: Test procedures

GSO ISO/IEC Guide 98-6:2023 测量的不确定度 第6部分：开发和使用测量模型

This document provides guidance on developing and using a measurement model and also covers the assessment of the adequacy of a measurement model. The document is of particular interest to developers of measurement procedures, working instructions and documentary standards. The model describes the relationship between the output quantity (the measurand) and the input quantities known to be involved in the measurement. The model is used to obtain a value for the measurand and an associated uncertainty. Measurement models are also used in, for example, design studies, simulation of processes, and in engineering, research and development. This document explains how to accommodate in a measurement model the quantities involved. These quantities relate i) to the phenomenon or phenomena on which the measurement is based, that is, the measurement principle, ii) to effects arising in the specific measurement, and iii) to the interaction with the artefact or sample subject to measurement. The guidance provided is organised in accordance with a work flow that could be contemplated when developing a measurement model from the beginning. This work flow starts with the specification of the measurand (clause 6). Then the measurement principle is modelled (clause 7) and an appropriate form of the model is chosen (clause 8). The basic model thus obtained is extended by identifying (clause 9) and adding (clause 10) effects arising from the measurement and the artefact or sample subject to measurement. Guidance on assessing the adequacy of the resulting measurement model is given in clause 12. The distinction between the basic model and the (complete) measurement model in the work flow should be helpful to those readers who already have a substantial part of the measurement model in place, but would like to verify that it contains all effects arising from the measurement so that it is fit for purpose. Guidance on the assignment of probability distributions to the quantities appearing in the measurement model is given in JCGM 100:2008 and JCGM 101:2008. In clause 11, this guidance is supplemented by describing how statistical models can be developed and used for this purpose. When using a measurement model, numerical problems can arise including computational effects such as rounding and numerical overflow. It is demonstrated how such problems can often be alleviated by expressing a model differently so that it performs well in calculations. It is also shown how a reformulation of the model can sometimes be used to eliminate some correlation effects among the input quantities when such dependencies exist. Examples from a number of metrology disciplines illustrate the guidance provided in this document.

Uncertainty of measurement — Part 6: Developing and using measurement models

GSO OIML R148-1:2023 非侵入式非自动血压计 第1部分：计量和技术要求

  Scope is not provided for this standard

Non-invasive non-automated sphygmomanometers - Part 1: Metrological and technical requirements

GSO OIML R150-2:2023 拱形溜槽型连续累加自动衡器 第2部分：测试程序

  Scope is not provided for this standard

Continuous totalising automatic weighing instruments of the arched chute type - Part 2 : Test procedures

GSO OIML R 149-3:2023 无创自动血压计 第3部分：测试报告格式

  Scope is not provided for this standard

Non-invasive automated sphygmomanometers Part 3: Test report format

GSO OIML R148-2:2023 无创非自动血压计 第2部分：测试程序

  Scope is not provided for this standard

Non-invasive non-automated sphygmomanometers - Part 2: Test procedures

GSO OIML R 149-1:2023 无创自动血压计 第1部分：计量和技术要求

This Recommendation specifies general, performance, efficiency and mechanical safety requirements for non-invasive automated sphygmomanometers and their accessories which, by means of an inflatable cuff, are used for the non-invasive measurement of arterial blood pressure. This Recommendation only applies to devices measuring at the arm, the wrist or the thigh.

Non-invasive automated sphygmomanometers Part 1: Metrological and technical requirements

GSO OIML D1:2023 国家计量系统 制定制度和立法框架

  Scope is not provided for this standard

National metrology systems – Developing the institutional and legislative framework

GSO OIML R148-3:2023 无创非自动血压计 第3部分：测试报告格式

  Scope is not provided for this standard

Non-invasive non-automated sphygmomanometers - Part 3: Test report format

ASTM F2537-23 测量微动用线性位移传感器系统的校准标准实施规程

Standard Practice for Calibration of Linear Displacement Sensor Systems Used to Measure Micromotion

T/YJXH 0001-2023 眼镜制配单位诚信计量评价规范

主要技术内容：本标准明确了对眼镜制配单位诚信计量进行评价的规范要求。包括人员及场地设施、计量器具配备及使用管理、计量投诉处理、诚信计量管理、进行诚信计量评价的申请及评价执行等内容和标准。

Standards for Integrity Measurement and Evaluation of Glasses Manufacturing Units

DB3205/T 1080-2023 计量校准现场服务风险管控规范

Measurement and Calibration Field Service Risk Management and Control Specifications

DB41/T 2454-2023 测量仪器检定校准证书有效性确认技术规范

Technical Specifications for Validity Confirmation of Verification and Calibration Certificates for Measuring Instruments

T/JMA 0007-2023 工业企业计量绩效评价指南

《工业计量绩效评价指南》的主要内容     1、范围：本文件是工业计量绩效评价的指南，给出了评价原则、评价指标和计量经济价值的估值方法。 2、规范性引用文件：给出了本文件的规范性引用文件。 3、术语和定义：给出了本文件需要界定的术语和定义。 4、总要求：给出了标准总要求。 5、领导：给出了在实施计量绩效评价工作方面，企业领导的的作用。 6、工业计量绩效评价要求：给出了评价要求的总则，从计量法规要求、工业计量要求、计量资源费效比测评、计量社会效益等五方面分别进行了阐述。 7、计量收益和计量损失的采集、解析与评定：给出了评价过程中采集计量收益和计量损失的相关信息和数据，并进行解析和评定的要求。 8、计量绩效评价结果利用：给出了利用计量绩效评价结果的方式和途径。 9、工业计量绩效改进：给出了基于评价结果实施改进的要求。 10、评价人员和评价机构要求：给出了评价人员在职业素养、知识和技能等方面的要求，给出了评价机构的基本要求。 11、评价程序及要求：给出了开展企业自我评价和第三方评价的程序和要求。

Guidelines for measurement performance evaluation in industrial enterprises

ASTM E2254-23 动态机械分析仪存储模量校准的标准试验方法

Standard Test Method for Storage Modulus Calibration of Dynamic Mechanical Analyzers

ISO/CD 10012:2023 测量管理体系 测量过程和测量设备的要求

Measurement management systems — Requirements for measurement processes and measuring equipment