17.040 长度和角度测量 标准查询与下载

QB/T 4621-2013 水平尺通用技术条件

本标准规定了水平尺的术语和定义、型式、基本尺寸、精度分级和标记、要求、试验方法、检验规则、标志、包装、运输与贮存。本标准适用于土木建筑、装饰装潢、机械安装等用途的水平尺。

General requirements for spirit levels

GSO OIML R35-3:2013 一般用途的材料长度测量 第3部分：测试报告格式

Not Available

Material measures of length for general use – Part 3 : Test report format

GSO OIML R35-2:2013 一般用途的物理长度测量 第2部分：测试方法

This Recommendation is applicable to the type evaluation and initial verification testing of material measures of length for general use, as defined in OIML R 35-1. This Recommendation sets out details of the test program, principles, equipment and procedures to be used for type evaluation and initial verification testing.

Material measures of length for general use – Part 2: Test methods

NF E81-010:2012 冲孔与冲压.冲切或冲压的金属零件的毛刺.最大允许毛刺高度及测量方法

Blanking and stamping - Burr on blanked or punched metallic parts - Maximum allowable burr height and measuring method.

QB/T 2443-2011 钢卷尺

本标准规定了钢卷尺的产品分类、技术要求、试验方法、检验规则、包装、标志、运输与贮存。 本标准适用于一般长度测量的钢卷尺。

Steel measuring tapes

QB/T 1519-2011 纤维卷尺

本标准规定了纤维卷尺的产品分类、技术要求、试验方法、检验规则、标志、包装、运输与贮存。 本标准适用于一般长度测量的纤维卷尺。

Fiber measuring tapes

BS EN ISO 13385-2:2011 产品几何技术规范(GPS).尺寸测量设备.游标深度计.设计和计量特性

This part of ISO 13385 provides the most important design and metrological characteristics of calliper depth gauges: - with analogue indication: vernier scale or circular scale (dial), and - with digital indication: digital display.

Geometrical product specifications (GPS). Dimensional measuring equipment. Calliper depth gauges. Design and metrological characteristics

EN ISO 13385-2:2011 产品几何技术规范(GPS).尺寸规格和测量设备.第2部分:卡尺深度计.设计和计量特性

This part of ISO 13385 provides the most important design and metrological characteristics of calliper depthgauges:? with analogue indication: vernier scale or circular scale (dial), and? with digital indication: digital display.

Geometrical product specifications (GPS) - Dimensional measuring equipment - Part 2: Calliper depth gauges; Design and metrological characteristics (ISO 13385-2:2011)

KS B 5232-2010 布尺

이 표준은 섬유를 소재로 하여 합성수지로 처리한 띠모양의 줄자(이하 줄자라 한다.)에 대하

Textile tape measures

GSO 1645:2010 如何校准千分尺

This document describes the steps been taken when calibrating micrometers of any dimension..

Method of Calibrating Micrometers

GSO ISO 3650:2006 测量模板

  Scope is not provided for this standard

Gauge blocks

GSO ISO 131:2002 表达大气中声音或噪音的物理和感官强度

This standard is concerned with the expression of the physical and subjective magnitudes which are used in the description of acoustical sound or noise in air.

Expression of physical and subgective magnitudes of sound or noise in air.

GSO ISO 2768-1:2002 一般公差 第1部分：未单独说明的纵向和角度尺寸公差

This standard is intended to simplify drawing indications and it specifies general tolerances for linear and angular dimensions without individual tolerance indications in four tolerance classes1). It applies to the dimensions of parts that are produced by metal removal or parts that are formed from sheet metal. These tolerances may be suitable for use with materials other than metal. This part only applies to the following dimensions which do not have an individual tolerance indication: a) Linear dimensions (e.g. external sizes, internal sizes, step sizes, diameters, radii, distances, external radii and chamfer heights for broken edges). b) Angular dimensions, including angular dimensions usually not indicated, e.g. right angles (90o), or angles of uniform polygons. c) Linear and angular dimensions produced by machining assembled parts. It does not apply to the following dimensions: a) Linear and angular dimensions which are covered by reference to other standards on general tolerances; b) Auxiliary dimensions indicated in brackets; c) Theoretically exact dimensions indicated in rectangular frames.

Generar tolerances part tolerances for linear and anyular dimension withuot individual to lerance indications .

GSO 1647:2002 骨传导医用电热元件测试与验证方法

This Gulf standard specifies the metrological requirements of testing and verification for clinical electrical thermometers with maximum device. Such instruments are designed to measure human or animal body temperature. Clinical electrical thermometers designed to measure skin temperature are not covered by this standard.

Methods of testing and verification for Clinical electrical thermometers with maximum device

GSO ISO 3670:1994 塞规、手柄（锥度和三重配合）和环规的毛坯件 设计和一般尺寸

This standard specifies the characteristics of blanks and handles for plain and screw plug gauges of taper lock and trilock design and blanks for plain and screw ring gauges. The types of gauges are described and illustrated and recommended blank and handle sizes are given in the Tables. Those features of design necessary to ensure interchangeability are specified in some detail and general information on other features is included for guidance in the manufacture of these gauges. It should be noted that the dimensions in the Tables apply to the blanks for gauging members when completed but before they are finished to final gauge size. Although this standard deals with blanks for taper lock and trilock plug gauges, it is recognized that solid gauges may sometimes be required, and their use is not precluded. Note: Blanks for other types of gauges and handles, for example collect-type plug gauges, alternatives to trilock gauges and, possibly, shorter series of blanks and calliper gauges will be dealt with in future supplements to this standard

Blanks for plug gauges and handles ( taper lock and trilock ) and Ring gauges - design and general dimersions.

CSN ISO 4292:1994 本标准包含 ISO 4292－1985.

Zpracovatel: ZKL VUVL, a. s. se sídlem v Brně, I?O 46346627, Lubomír Vel?ovsk?, Ing. Eva Vele?íková Technická normaliza?ní komise: TNK 10 Metrologie geometrick?ch vlastností povrchu Pracovník ?eského normaliza?ního institutu: Ing. Miroslav Pospí?il

Methods for the assessment of departure from roudness. Measurement by two- and three-point methods

GSO 161:1993 商业长度测量

This gulf standard is concerned with rigid unfoldable metallic and wooden length measures of 1 metre length, used in commercial purposes.

COMMERCIAL LENGTH MEASURES

GSO 162:1993 商业长度测量的验证方法

This Gulf standard is concerned with the method of verification of 1 metre rigid unfoidable length end measures of both metallic and wooden types which are used for commercial purposes.

VERIFICATION METHOD FOR COMMERCIAL LENGTH MEASURES

JIS B 7532:1979 木折尺

Wooden folding rules