17.040.10 极限和配合 标准查询与下载

NF E02-352:1999 几何产品规范(GPS).切割和弯曲的工件.无特殊公差指示的尺寸和部件的尺寸和几何公差

Geometrical product specifications (GPS). Cutted and bended workpieces. Dimensional and geometrical tolerances for dimensions and features without individual tolerances.

JB/T 9184-1999 统计尺寸公差

本标准规定了统计尺寸公差的术语定义、实际尺寸概率分布特性的方案和统计尺寸公差在图样上的标注。 本标准适用于长度尺寸，特别适用于配合尺寸和较高精度的尺寸。

Statistical dimension tolerances

JIS B 0401-2:1998 公差和配合的 ISO 体系.第2部分:孔和轴的标准公差级和公差偏差表

この規格のこの部は，JIS B 0401-1に示す規定事項に基づいて計算した穴及び軸に対して多く用いられる公差域クラス(公差域)の寸決許容差の数値を示す。この規格のこの部は，上の寸法許容差ES(穴の場合)及びes(軸の場合)並びに下の寸法許容差EI(穴の場合)及びei (軸の場合)の数値を規定する(図1を参照)。備考 寸法許容差の表において，基準線を輪にして対称な公差等級JS及jsを除き，上の寸法許容差ES又はesの数値は下の寸法許容差EI又はeiの数値の上側に表示する。

ISO system of limits and fits -- Part 2: Tables of standard tolerance grades and limit deviations for holes and shafts

JIS B 0401-1:1998 公差和配合的 ISO 体系.第1部分:公差、偏差和配合的基础

この規格のこの部は，寸法公差及びはめあいの方式の基本事項に加えて，基本公差及び基礎となる寸法許容差の計算値について規定する。公差方式の適用に際しては，これらの数値を用いる(附属書AのA.1も参照)。この規格のこの部は，用語及び定義とともに関連する記号についても規定する。

ISO system of limits and fits -- Part 1: Bases of tolerances, deviations and fits

JIS B 0616:1996 圆锥配合体系

この規格は，テーパ比が1/3～1/500，円すい長さが6 mmを超え630mm以下，円すい直径500 mm以下で， JIS B 0614で規定している円すい直径公差による方法(方法1)に従って公差を指定した，円すい部品に適用する円すいはめあい方式について規定する。なお，基準変位量及びはめあい変位量の計算は，附属書による。

System of cone fits

SR ISO 5166:1995 锥度C=1:3至1:500、长度6mm至630mm和直径不超过500mm的圆锥（锥度）配合制

Prezentul Standard Interna?ional se aplic? conurilor cotate ?i tolerate dup? metoda 1 .Metoda dimensiunilor liniare tolerate" din ISO 3040, ceea ce ?nseamn? c? toleran?a limiteaz? varia?ia de ?ntrep?trundere a suprafe?elor conjugate, fiecare suprafa?? fiind cuprins? ?ntre dou? profile limit? de aceea?i deschidere, corespunz?toare st?rilor de maximum ?i de minimum ale materialului. Pentru cotarea ?i tolerarea conurilor pe desen, se face referire la ISO 3040. NOT? NA?IONAL? - Metoda 1 ?Metoda dimensiunilor liniare tolerate" din ISO 3040: 1974, nu mai este prev?zut? ?n ISO 3040: 1990.

System of cone fits for cones fromC = 1:3 to 1:500, lengths from 6 to 630 mm and diameters up to 500 mm

AS 1654.1:1995 ISO 极限与配合制 公差、偏差和配合的基础

Provides the bases for a system of tolerances and deviations suitable for plain workpieces, and fits between mating cylindrical features or fits between workpieces having features with parallel faces such as the fit between a key and a keyway. Annexes gi

ISO system of limits and fits - Bases of tolerances, deviations and fits

AS 1654.2:1995 ISO极限与配合制 孔和轴的标准公差等级和极限偏差表

Gives values of the limit deviations for commonly used tolerance class for holes and shafts calculated from the information given in AS 1654.1. Graphical representations of tolerance zones for holes and shafts are given in the Annex. Identical with and r

ISO system of limits and fits - Tables of standard tolerance grades and limit deviations for holes and shafts

STAS SR EN 22768-2-1995 一般公差．第2部分：无单独公差指示的零件的几何公差

Prezenta parte a ISO 2768 a fost conceput? pentru a simplifica indica?iile de pe desen ?i stabile?te toleran?ele generale geometrice pentru a controla acele elemente de pe desen care nu au indicate toleran?e individuale. Acest standard indic? toleran?ele

General tolerances - Part 2: Geometrical tolerances for features without individual tolerance indications

CNS 13536-1995 圆锥配合

本标准适用于推拔比 1/3~1/500，圆锥长度超过 6mm 至 630mm 依 CNS 13534 〔圆锥公差制度〕 所规定圆锥直径公差（方法 1）指定公差之圆锥工件所适用之圆锥配合方式。

Cone Fits

KS B 0516-1994(1999) 棱镜的角度和棱镜的机器草案

ANGLES AND SLOPES ON PRISM

CSN ISO 2768-2:1994 一般公差．第2部分：未单独标注公差的要素的几何公差

Zpracovatel: ?koda, koncern, Plzeň, a. s., I?O 213 101, Ladislav Pe?i?ka Pracovník ?eského normaliza?ního institutu: Ing. Aléxandros Georgiádis

General tolerances - Part 2: Geometrical tolerances for features without individual tolerance indications

NF E02-100-2:1993 ISO极限值和配合体系.第2部分:孔径和轴的标准公差等级和极限偏差表

Iso system of limites and fits. Part 2 : tables of standard tolerance grades and limit deviations for holes and shafts.

NF E02-100-1:1993 ISO极限公差和配合系统.第1部分:公差、偏差和配合的基础

Iso system of limits and fits. Part 1 : bases of tolerances, deviations and fits.

BS EN 22768-1:1993 一般公差 线性和角度尺寸公差 无单独公差指示

This part of ISO 2768 is intended to simplify drawing indica-tions and it specifies general tolerances for linear and angular dimensions without individual tolerance indications in four tol-erance classes. NOTE 1 —The concepts behind the general tolerancing of linear and angular dimensions are described in annex A. It applies to the dimensions of parts that are produced by metal removal or parts that are formed from sheet metal. NOTES 2 These tolerances may be suitable for use with materials other than metal. 3 Parallel International Standards exist or are planned, e.g. see ISO 8062 for castings. This part of ISO 2768 only applies for the following dimensions which do not have an individual tolerance indication: a) linear dimensions (e.g. external sizes, internal sizes, step sizes, diameters, radii, distances, external radii and chamfer heights for broken edges); b) angular dimensions, including angular dimensions usually not indicated, e.g. right angles (90°), unless ref-erence to ISO 2768-2 is made, or angles of uniform poly-gons; c) linear and angular dimensions produced by machining assembled parts. It does not apply for the following dimensions: a) linear and angular dimensions which are covered by reference to other standards on general tolerances; b) auxiliary dimensions indicated in brackets; c) theoretically exact dimensions indicated in rectangular frames. note:1) ISO 8062 : 1984, Castings —System of dimensional tolerances.

General tolerances. Tolerances for linear and angular dimensions without individual tolerance indications

NF E02-350-2:1993 通用公差.第2部分:未注单个公差的零部件的几何公差

General tolerances. Part 2 : geometrical tolerances for features without individual tolerance indications.

NF E02-350-1*NF EN 22768-1:1993 一般公差.第1部分:未标注单个公差指示的线性尺寸和角尺寸公差

General tolerances. Part 1 : tolerances for linear and angular dimensions without individual tolerance indications.

DS/ISO 2768-2:1993 一般公差 第2部分：没有单独公差指示的特征的几何公差

This part of ISO 2768 simplifies drawing indications and specifies general geometrical tolerances to control those features on the drawing which have not respective individual indication. The standard specifies general geometrical tolerances in 3 classes.

General tolerances - Part 2: Geometrical tolerances for features without individual tolerance indications

DS/ISO 2768-1:1993 一般公差 第1部分：无单独公差标记的线性和角度尺寸的公差

This part of ISO 2768 simplifies drawing indications and specifies general tolerances for linear and angular dimensions without individual tolerance indications in 4 tolerance classes.

General tolerances - Part 1: Tolerances for linear and angular dimensions without individual tolerance indications

DS/EN 22768-1:1993 一般公差．第1部分：无专门公差指示的线性和角度尺寸公差

Denne del af DS/ISO 2768 har til formål at forenkle tegnings-angivelserne, og den specificerer generelle tolerancer for line-ære mål og vinkelmål uden toleranceangivelse i fire tolerance-klasser. NOTE 1 - Begreberne, der ligger til grund for den generelle tolerance-sætning af liniære mål og vinkelmål, er beskrevet i anneks A. DS/ISO 2768 anvendes til dimensioner på emner, som er frem-stillet ved spåntagning eller på emner fjernet i metalplade. NOTER 2 Tolerancerne kan være velegnede til andre materialer end metal. 3 Andre tilsvarende internationale standarder eksisterer, fx ISO 8062 1' for støbegods, eller er planlagt. Denne del af DS/ISO 2768 gælder kun for følgende mål, hvortil der ikke er angivet en individuel toleranceangivelse: a) lineære mål (fx udvendige mål, indvendige mål, trin-mål, diametre, radier, afstande, udvendige radier (run-dinger) og rejfningshøjder for brudte kanter); b) vinkelmål, herunder vinkelmål, der normalt ikke angi-ves, fx rette vinkler (90°) - medmindre der er referen-ce til DS/ISO 2768-2 - eller vinkler i ligesidede (lige-vinklede) polygoner; c) lineære mål eller vinkelmål, der er fremkommet ved maskinbearbejdning af monterede dele. Denne del af DS/ISO 2768 gælder ikke for følgende mål: a) liniære mål og vinkelmål, som er omtalt i andre inter-nationale standarder om generelle tolerancer, fx ISO 8062 D, DS 326; b) hjælpemål, der er angivet i parentes (DS/ISO 129); c) teoretisk korrekte mål, der er angivet i skarp parentes (DS/ISO 1101).

General tolerances. Part 1: Tolerances for linear and angular dimensions without individual tolerance indications