17.120.20 明渠中流量的测量 标准查询与下载

ISO 4362:1999 水文测定——利用构筑物测量明渠流量——梯形宽顶堰

This International Standard specifies a method of steady-flow measurement in open channels using a trapezoidal broad-crested weir under modular and non-modular conditions. Consideration is given to the use of the weir in both rectangular and trapezoidal channels. Limitations to the use of the weir are given in 7.6 and 8.6.

Hydrometric determinations — Flow measurement in open channels using structures — Trapezoidal broad-crested weirs

BS ISO 8368:1999 水文测定.对使用开放明渠的结构中的流量测定.结构选择指南

This International Standard gives guidelines for selection of a particular type of flow-gauging structure for measurement of liquid flow in open channels. It sets out the factors, and summarizes the parameters which may influence such a selection. NOTE In general, a flow-gauging structure is used when high accuracy is required for continuous records of flow.

Hydrometric determinations - Flow measurements in open channels using structures - Guidelines for the selection of structure

ASTM D5129-95(1999) 通过宽度收缩间接开放通道流量测量的标准测试方法

Standard Test Method for Open Channel Flow Measurement of Water Indirectly by Using Width Contractions

ISO 8368:1999 水文测验 应用建筑物做明渠水流测量 建筑物选择指南

This International Standard gives guidelines for selection of a particular type of flow-gauging structure for measurement of liquid flow in open channels. It sets out the factors, and summarizes the parameters which may influence such a selection. NOTE In general, a flow-gauging structure is used when high accuracy is required for continuous records of flow.

Hydrometric determinations - Flow measurements in open channels using structures - Guidelines for selection of structure

ISO 2425:1999 潮水河明渠水流测量

This International Standard provides a summary of a selection of recommended methods available for the measurement of liquid flow in tidal channels, special consideration being given to those techniques that are either unique to or particularly appropriate for measurement under tidal conditions, including treatment of errors. Reference is also made, where appropriate, to methods developed for measurement in non-tidal channels, but in such cases attention is drawn to their limitations with respect to practicality and/or accuracy. This International Standard does not describe alternative methods, such as weirs, flumes, dilution gauging, salt velocity and floats, although they may be suitable under certain conditions, especially where the effect of tides only impedes and does not stop or reverse the passage of stream flow. These methods are described in detail in other International Standards. The standard comprises two parts: a) techniques for single measurements of tidal flow; b) techniques appropriate for continuous measurement of tidal flow. The cubature method of measurement, although currently not used, is included in annex A. Annex B presents methods suitable for measurement for tidal conditions, and annex C gives an example of the computation for a single vertical. Similar computations may be made for other verticals.

Measurement of liquid flow in open channels under tidal conditions

ISO 11329:1998 液体比重测定.感潮航道中悬浮泥砂迁移的测量

Hydrometric determinations - Measurement of suspended sediment transport in tidal channels

BS ISO 1100-2:1998 明渠液体流量测量.第2部分:水位流量关系测定

Specifies methods of determining the stage-discharge relation for a gauging station in both stable and unstable channels, including those subject to ice conditions. Includes an analysis of the uncertainties involved in the preparation and use of the stage-discharge relation.

Measurement of liquid flow in open channels - Determination of the stage-discharge relation

ISO/TR 11332:1998 水文测验 不稳定河流和季节性河流

This Technical Report deals with the measurement of stage and discharge and the establishment and operation of a gauging station on an unstable channel and/or ephemeral stream. It covers additional requirements and general considerations specifically related to sand-channel streams that are described in the measurement methods in the International Standards noted in clause 2.

Hydrometric determinations - Unstable channels and ephemeral streams

ISO 1100-2:1998 明渠水流测量 第2部分:水位流量关系的确定

This part of ISO 1100 specifies methods of determining the stage-discharge relation for a gauging station. A sufficient number of discharge measurements, complete with corresponding stage measurements, is required to define a stage-discharge relation to the accuracy required by this part of ISO 1100. Stable and unstable channels are considered, including brief descriptions of the effects on the stage-discharge relation of ice and hysteresis. Methods for determining discharge for twin-gauge stations, ultrasonic velocity stations, electromagnetic velocity stations, and other complex ratings are not described in detail. These types of rating are described in other International Standards and Technical Reports, namely ISO/TR 9123, ISO 6416 and ISO 9213, as shown in clause 2.

Measurement of liquid flow in open channels - Part 2: Determination of the stage-discharge relation

ISO/TR 11627:1998 明渠水流测量 用不稳定流量模型计算水流流量

This Technical Report describes a method for computing continuous records of stream flow in an open channel through the numerical solution of the one-dimensional unsteady flow equations. Such an approach is typically identified as an unsteady flow model and generally involves the use of computers for solution of the flow equations. Unsteady flow models are appropriate for computing stream flow records at locations where (1) a single-valued stage-discharge relation does not exist, (2) backwater affects the discharge under selected or all conditions, (3) flows are affected by tides, or (4) it is not possible to gage the flow using velocity-area methods. Unsteady flow models also are appropriate for evaluating the effects of changes in a managed flow regime on downstream conditions prior to the implementation of any changes. This Technical Report is applicable to steady and unsteady flows, to nominee flows, and to tidal flows in which there are no significant longitudinal and vertical density gradients. The method is considered equivalent to, or better than, the commonly used stage-fall-discharge technique (ISO 1100-1:1996, 7.2 and Annex C) because the method uses information on the physical characteristics of the channel, including the cross-sectional geometry, channel rugosity and channel slope, and the method is based on a mathematical description of the physics of fluid flow. This Technical Report describes the theoretical basis and fundamental assumptions of the technique, and provides a summary of selected numerical methods used to solve the unsteady flow equations. Also provided are details on the application of an unsteady flow model, including data requirements, procedures for model calibration, testing, and applications, and identification of uncertainties associated with the method. This Technical Report does not provide sufficient information for the development of a computer program for solving the unsteady flow equations, but rather is based on the assumption that an adequately documented computer program is available

Measurement of liquid flow in open channels - Computing stream flow using an unsteady flow model

BS ISO TR 8363:1998 明渠液体流量的测量.方法选择的一般指南

This Technical Report gives general guidelines for the selection of a suitable method for measurements of liquid flow in open channels. More specific guidelines are contained in International Standards relevant to each method.

Measurement of liquid flow in open channels - General guidelines for the selection of method

KS A 0611-1997(2022) 变面积流量计测量方法

Method of measurement by variable area flowmeters

KS A 0611-1997 变面积式流量计测定法

이 규격은 플로트형 면적 유량계(이하 유량계라 한다)를 사용하여 관내를 흐르는 액체, 기체

Method of measurement by variable area flowmeters

KS A 0611-1997(2017) 通过可变面积流量计测量的方法

Method of measurement by variable area flowmeters

ISO 1070:1992/Amd 1:1997 明渠液体流量测量.坡度面积法.修改件1

Liquid flow measurement in open channels — Slope-area method — Amendment 1

ISO/TR 11974:1997 明渠水流测量 电磁流速仪

Measurement of liquid flow in open channels - Electromagnetic current meters

ISO 4364:1997 明渠水流测量 河床质取样

This International Standard gives guidance on methods for sampling of both non-cohesive sand bed material and cohesive bed material (both of which may contain some fine gravel), principally for the purpose of determining the grain size frequency distribution of the bed material in open channels. NOTE — Other publications of relevance to samplers and sampling techniques are listed in the bibliography in annex A.

Measurement of liquid flow in open channels - Bed material sampling

ISO/TR 8363:1997 明渠中液体流量的测量.方法选择的一般指南

This Technical Report gives general guidelines for the selection of a suitable method for measurements of liquid flow in open channels. More specific guidelines are contained in International Standards relevant to each method.

Measurement of liquid flow in open channels — General guidelines for selection of method

BS 3680-3B:1997 明渠流量测量.第3部分:河川流量测量.第B节:水文测量站建立和工作指南

Deals with the establishment of a gauging station on a lake, reservoir, river or open channel, for the measurement of stage, or discharge, or both.

Measurement of liquid flow in open channels - Stream flow measurement - Guide for the establishment and operation of a gauging station

ONORM B 2401-1996 明渠液流量测量

Diese ?NORM stellt die Me?- und Auswerteverfahren und deren Genauigkeit bei der Durchflu?messung in offenen Gerinnen dar.

Liquid flow measurement in open ChannelsMesure de debit des liquides dans les canaux decouverts