17.140 声学和声学测量 标准查询与下载

GSO OIML R60-3:2021 称重传感器计量法规 第3部分：测试报告格式

In the framework of OIML B 18 Framework for the OIML Certification System (OIML-CS) applicable to load cells in conformity with OIML R 60-1 and R 60-2, use of this Report Format is mandatory, in French and/or in English with translation into the national languages of the countries issuing such certificates, if appropriate. Implementation of this Report Format is informative with regard to the implementation of OIML R 60-1 and R 60-2 in national regulations.

Metrological regulation for load cells Part 3: Test report format

GSO OIML R60-2:2021 称重传感器计量法规 第2部分：计量控制和性能测试

  Scope is not provided for this standard

Metrological regulation for load cells Part 2: Metrological controls and performance tests

GSO OIML R60-1:2021 称重传感器计量法规 第1部分：计量和技术要求

This Recommendation prescribes the principal metrological static r 2.1 equirements and static evaluation procedures for load cells used in the determination of conformity to this Recommendation. It is intended to provide authorities with uniform means for determining the metrological characteristics of load cells used in measuring instruments that are subjected to metrological controls. It is acknowledged that test procedures found in OIML R 60-2 are useful in the evaluation of load cells that are currently in service (i.e. primarily of the strain gauge design) however, there may be variations in designs for load cells that will require additional or modified test procedures to appropriately evaluate them. These additional test procedures may be annexed when necessary. Except where otherwise specified, these requirements apply regardless of the technology or operating principle employed. The requirements and evaluation procedures in this Recommendation have been drafted to be non-specific with regard to load cell design and their operating principles. 2.2 This Recommendation utilizes the principle that several measurement errors shall be considered together when applying load cell performance characteristics to the permitted error envelope. Thus, it is not considered appropriate to specify individual errors for given characteristics (e.g. non-linearity, hysteresis, effects of influence factors), but rather to consider the total error envelope allowed for a load cell as the limiting factor. The use of an error envelope allows the balancing of the individual contributions to the total error of measurement while still achieving the intended final result. Note: The error envelope may be defined as the boundary of the combined individual errors (see Table 4) as a function of the force introduced by the applied load (expressed in mass units) over the measuring range. The combined error determined may be positive or negative and include the effects of non-linearity, hysteresis and temperature. 2.3 “Weighing modules” as noted in OIML R 76 [1], T.2.2.7 (see R 60, Annex A, A.2.1), are not covered by this Recommendation. Weighing instruments that include load cells and which give an indication of mass are the subjects of separate Recommendations. While digital load cells may be covered under this Recommendation, a load cell that produces an output consisting of more than digital “raw counts” is not covered. In the illustration from OIML R 76 below, the scope of R 60 would not extend beyond module #3.

Metrological regulation for load cells Part 1: Metrological and technical requirements

ABS 295-2021 水下噪声和外部空气噪声分类符号指南

GUIDE FOR THE CLASSIFICATION NOTATION UNDERWATER NOISE AND EXTERNAL AIRBORNE NOISE

DB21/T 3415-2021 辽宁省水库淤积浅剖声呐探测技术规程

Technical regulations for shallow profile sonar detection of reservoir deposits in Liaoning Province

KS A ISO 11929-4:2014 电离辐射测量的检测限值和决定范围的测定 第4部分：样本处理不影响线形化合物速率计检测原理和应用

Determination of the detection limit and decision threshold for ionizing radiation measurements－Part 4：Fundamentals and application to measurements by use of linear-scale analogue ratemeters, without the influence of sample treatment

GSO ISO 20283-4:2013 声学 测量房间声音变量 第3部分：开放式办公室

  Scope is not provided for this standard

Acoustics -- Measurement of room acoustic parameters -- Part 3: Open plan offices

MH/T 9001-2008 亚音速喷气飞机噪声合格审定.飞行试验等效程序

本标准规定了亚音速喷气飞机噪声合格审定飞行试验等效程序。 本标准适用于亚音速喷气飞机噪声合格审定飞行试验。

Equivalent flight test procedures for the noise certincation of subsonic jet powered aeroplane

MH/T 9002-2008 温度和湿度函数的大气噪声吸收标准值

本标准规定了温度和湿度函数的大气噪声吸收标准值的计算方法。 本标准适用于飞机噪声测量值的评估。

Standard values of atmospheric noise absorption as a function of temperature and humidity

GSO OIML R 58:2007 声级计

This Recommendation deals with sound level meters, i.e. instruments for the measurement of frequency and time weighted sound pressure levels. It contains an appropriate test scheme for pattern evaluation and verification and a test report format for pattern evaluation.

SOUND LEVEL METERS

GSO OIML R102:2007 音频校准

This Recommendation deals with sound calibrators, i.e. devices designed to produce a known effective sound pressure level or levels at a specified frequency or frequencies when coupled to specified types of microphone in specified configurations (e.g. with or without protective grid). Such devices are used for the acoustical calibration of microphones and sound measuring instruments. The Recommendation contains an appropriate test scheme for pattern evaluation and verification.

SOUND CALIBRATORS

ASA S12.68-2007 在包括CD Rom听力保护器评估声压水平有效性方法

Methods of Estimating Effective A-Weighted Sound Pressure Levels When Hearing Protectors are Worn Includes CD Rom

Methods of Estimating Effective A-Weighted Sound Pressure Levels When Hearing Protectors are Worn

JT/T 659-2006 混凝土超声检测仪

本标准规定了水泥混凝土超声检测仪器结构及等级划分、技术要求、试验方法、检验规则、标志、包装、运输和贮存。 本标准适用于检测水泥混凝土强度和内部缺陷的超声检测仪。

Ultrasonic test instrument of concrete

ASA S1.40-2006 声音口径测量器规范和确认程序

Specifications and Verification Procedures for Sound Calibrators

Specifications and Verification Procedures for Sound Calibrators

ASA S12.5-2006 用以决定声音能量水平声源执行和校准标准ISO 6926:1999

Acoustics Requirements for the Performance and Calibration of Reference Sound Sources Used for the Determination of Sound Power Levels ISO 6926:1999

Acoustics Requirements for the Performance and Calibration of Reference Sound Sources Used for the Determination of Sound Power Levels ISO 6926:1999

ASA S12.65-2006 演讲干扰噪声

For Rating Noise with Respect to Speech Interference

For Rating Noise with Respect to Speech Interference

JJG 482-2005 实验室标准传声器(自由场互易法)

本规程适用于LS1P实验室标准传声器(以下简称传声器)的首次检定、后续检定和使用中检验。

Laboratory Standard Microphones (Free - field Reciprocity Method)

JJG 790-2005 实验室标准传声器(耦合腔互易法)

本规程适用于实验室标准传声器的首次检定、后续检定和使用中检验。

Laboratory Standard Microphones (Coupler Reciprocity Method)

JJG 176-2005 声校准器

本规程适用于LS级(实验室标准)、1级和2级声校准器的首次检定、后续检定和使用中的检验。

Sound Calibrators

ASA S1.15 PART 2-2005 测量麦克风:第2部分根据互易对技术实验室标准麦克风压力校准 的首要方法取代ANSI S1.10-1966

Measurement Microphones Part 2: Primary Method for Pressure Calibration of Laboratory Standard Microphones by the Reciprocity Technique Replaces ANSI S1.10-1966

Measurement Microphones ?Part 2: Primary Method for Pressure Calibration of Laboratory Standard Microphones by the Reciprocity Technique