17.140.20 机器和设备的噪声 标准查询与下载

GOST R 53573-2009 机械振动.传到弹性隔离装置的振动测量.一般要求

Mechanical vibration. Measurement of vibration transferred into resilient isolators. General requirements

GOST R 53567-2009 声学.单个脉冲或脉冲串的描述与测量方法

Acoustics. Methods for the description and measurement of single impulses or series of impulses

EN ISO 3822-1:1999/A1:2008 声学.用于供水设施的装置和设备发出的噪音的实验室试验.第1部分测量方法 包含修改件A1,2008

Acoustics - Laboratory tests on noise emission from appliances and equipment used in water supply installations - Part 1: Method of measurement - Amendment 1: Measurement uncertainty (ISO 3822-1:1999/Amd 1:2008)

KS B ISO 11689-2008(2018) 声学机械和设备噪声发射数据比较程序

Acoustics－Procedure for the comparison of noise-emission data for machinery and equipment

KS B ISO 11689:2008 声学.机器和设备发射噪声数据的比较方法

이 표준은 소음 방사 데이터의 기본적 개념하에서 기계 또는 장비의 계열, 형태, 집단 또는

Acoustics－Procedure for the comparison of noise-emission data for machinery and equipment

KS B ISO 11689-2008(2023) 声学.机械和设备噪声发射数据的比较程序

Acoustics－Procedure for the comparison of noise-emission data for machinery and equipment

ANSI/AMCA 300-2008 风扇噪音测试用回响室法

This standard applies to fans of all types and sizes. This standard is limited to the determination of airborne sound emission for the specified setups. Vibration is not measured, nor is the sensitivity of airborne sound emission to vibration effects determined. The size of a fan that can be tested in accordance with this standard is limited only by the practical aspects of the test setups. Dimensional limitations, test subject dimensions, and air performance will control the test room size and power and mounting requirements for the test subject. The test setup requirements in this standard establish the laboratory conditions necessary for a successful test. Rarely will it be possible to meet these requirements in a field situation. This standard is not intended for field measurements.

Reverberant Room Method for Sound Testing of Fans

GOST R 52987-2008 声学.空调终端装置噪音性能的测定.消声室精度测定方法

Acoustics. Determination of noise performance for air-terminal devices. Precision methods for anechoic rooms

ANSI/ASA S12.2-2008 房屋噪音评估标准

This Standard provides three primary methods for evaluating room noise: a survey method that employs the A-weighted sound level; an engineering method that employs expanded noise criteria (NC) curves; and a method for evaluating low frequency fluctuating noise using room noise criterion (RNC) curves.

Criteria for Evaluating Room Noise

SANS 60034-9:2007 旋转电机．第9部分：噪声限值

Specifies test methods for the determination of sound power level of rotating electrical machines.

Rotating electrical machines Part 9: Noise limits

KS B ISO 11204-2007(2017) 声学机械和设备发出的噪声工作站和其他指定位置发射声压级的测量要求环境校正的方法

Acoustics－Noise emitted by machinery and equipment－Measurement of emission sound pressure levels at a work station and at other specified positions－Method requiring environmental corrections

KS B ISO TR 7849:2007 声学.振动测量仪器发射的气载噪音评估

이 기술적 보고서는 표면 진동 측정에 의해 기계 또는 장비로부터 방사된 음력 평가를 위한

Acoustics－Estimation of airborne noise emitted by machinery using vibration measurement

KS B ISO 11204:2007 声学.机器和设备发射的噪声.工作场所与其他指定位置测量噪音声压级.环境修正指数要求法

이 규격은 작업장이나 다른 지정된 장소 근처에서 확실한 자격 요구조건을 갖춘 모든 환경에서

Acoustics-Noise emitted by machinery and equipment-Measurement of emission sound pressure levels at a work station and at other specified positions-Method requiring environmental corrections

KS B ISO TR 7849-2007(2017) 声学.用振动测量法估计机械发出的空气噪声

Acoustics－Estimation of airborne noise emitted by machinery using vibration measurement

ISO 11689:1996/cor 1:2007 声学.机械和设备发射噪声数据的比较程序.技术勘误1

This standard is Acoustics - Procedure for the comparison of noise-emission data for machinery and equipment; Technical Corrigendum 1

Acoustics - Procedure for the comparison of noise-emission data for machinery and equipment; Technical Corrigendum 1

KS I ISO 10843-2007(2017) 声学－单脉冲或一系列脉冲的描述和物理测量方法

Acoustics－Methods for the description and physical measurement of single impulses or series of impulses

KS I ISO 10843:2007 声学.单个脉冲或脉冲串的物理测量和描述方法

이 규격은 단일 충격 음향 또는 짧은 연속 충격 음향의 물리적 측정과 데이터의 제시와 기술

Acoustics－Methods for the description and physical measurement of single impulses or series of impulses

KS I ISO 9611:2007 声学.关于连接结构声辐射固体声的声源的特性.弹性安装的机械接触点处的振速测量

이 국제 규격은 지원장치에 대한 1/3옥타브 대역 자유 속도 레벨 스펙트라(적용 가능하다면

Acoustics－Characterization of sources of structure-borne sound with respect to sound radiation from connected structures－ Measurement of velocity at the contact points of machinery when resiliently mounted

GSO IEC 60704-2-11:2007 家用和类似用途电器气动声噪声测定试验规范 第211部分：电动食品制备操作器的特殊要求

Applies to electrically-operated food preparation appliances. Theseare intended for placing on counters, tables, work tops or sinks, for wall-mounting, for building-in or for hand held use. It should be used in conjunction with the IEC 60704-1, 2nd edition (1997).

Household and similar electrical appliances - Test code for the determination of airborne acoustical noise - Part 2-11: Particular requirements for electrically-operated food preparation

GSO IEC 60704-3:2007 家用和类似用途电器测定气动声噪声试验规范 第3部分：表观发射噪声值的测定和确认过程

Describes procedures for determining and verifying the declared values of the noise emitted by household and similar appliances. It applies to all categories of household and similar electrical appliances covered by IEC 60704-1 and IEC 60704-2 dealing with particular requirements for special categories of appliances.

Household and similar electrical appliances - Test code for the determination of airborne acoustical noise - Part 3: Procedure for determining and verifying declared noise emission values