17.140.20 机器和设备的噪声 标准查询与下载

JIS Z 8737-2:2000 声学.机械装置及设备发出的噪声.工作地点和其它特定场所发出声压级的测量.现场调查方法

この規格は，反射性の強い音場において，機械及び装置近傍の作業位置及び他の指定位置における放射音圧レべルを測定するーつの方法について規定する。

Acoustics -- Noise emitted by machinery and equipment -- Measurement of emission sound pressure levels at a work station and at other specified positions -- Survey method in situ

SNI 04-6255.2-2000 声学-汽轮机及驱动机械噪音的测量

Acoustics - Measurement of airbone noise emitted by steam turbines and driven machinery

GOST 30683-2000 机器噪声.工作地及其他检验点的辐射声压级的测量.声学条件的修正法

Настоящий стандарт распространяется на стационарные, передвигающиеся и переносные машины, механизмы и другое оборудование, эксплуатируе

Noise of machines. Measurement of emission sound pressure levels at a work station and at other specified positions. Method requiring environmental corrections

EN ISO 3740:2000 声学.噪声源音响功率级的测定.基础标准使用指南ISO 3740-2000

Acoustics - Determination of Sound Power Levels of Noise Sources - Guidelines for the Use of Basic Standards ISO 3740: 2000

SNI 04-6255.1-2000 声学-测量声压的功率水平的燃气涡轮机的安装. 以评估环境噪声-调查方法

Acoustic - Measurement of sound pressure power level of gas turbines installation to evaluate environmental noise - Survey methods

SANS 8297:1994 声学．环境声压级评估用多源工厂的声功率级的测定．工程法

Specifies an engineering method for determining the sound power levels of large multisource industrial plants relevant to the evaluation of sound pressure levels in the environment.

Acoustics - Determination of sound power levels of multisource industrial plants for evaluation of sound pressure levels in the environment - Engineering method

JB/T 4330-1999 制冷和空调设备噪声的测定

本标准规定了反射平面上自由场条件下噪声声功率级的测定方法；附录 C 给出了噪声声压级的测量方法；附录 D 给出了空调机（器）噪声声压级的测量方法。 本标准适用于由工厂组装出厂的制冷和空调设备及部件。

Determination of noise emitted by refrigeranting and air conditioning equipments

CNS 11445.9-1998 旋转电机之噪音限度

Noise limits of rotating electrical machines

CNS 11445-9-1998 旋转电机之噪音限度

本标准对府合 CNS 11445-1 的旋转机 (以下简称旋转机) ，其冷却方法依 CNS 11445-6、保护等级依 CNS 11445-5、且有下列特性者，设定其最大容许的 A 权值音能未准：- 不论是 A.C.或 D.C.旋转机，为标准的设计，未有意在降低噪音位准之特别电器、机械或声音上的改造。

Noise limits of rotating electrical machines

DS/ISO 10843:1998 声学 单个脉冲或一系列脉冲的描述和物理测量方法

This standard specifies methods for the measurement of single bursts of impulses or bursts of noise such as those produced by explosions, artillery fire, bombing and other similar activities, sonic boom, pistol and riffle fire, and cartridge operated nailing machines, and presentation of the data.

Acoustics - Methods for the description and physical measurement of single impulses or series of impulses

DS/ISO 8297:1998 声学 环境声压级评价用多源工业设备声功率级的测定 工程方法

This standard specifies an engineering method for determining the sound power levels of large multi-source industrial plants relevant to the evaluation of sound pressure levels in the environment.

Acoustics - Determination of sound power levels of multisource industrial plants for evaluation of sound pressure levels in the environment - Engineering method

SANS 11203:1995 声学．机器和设备发射的噪声．由声功率级确定工作位置和其它指定位置的发射声压级

Specifies two methods for determining the emission sound pressure levels of machinery and equipment, at a work station and at other specified positions nearby, by calculation from the sound power level. The principal purpose of this determination is to p

Acoustics - Noise emitted by machinery and equipment - Determination of emission sound pressure levels at a work station and at other specified positions from the sound power level

SANS 11200:1995 声学．机械和设备噪声．在工作位置和其他特定位置测发射声压级定基本标准导则

Provides brief summaries of the basic International Standards for determining emission sound pressure levels from all types of machinery and equipment, at work stations and at other specified positions, and gives guidance on the process of selection of w

Acoustics - Noise emitted by machinery and equipment - Guidelines for the use of basic standards for the determination of emission sound pressure levels at a work station and at other specified positions

SANS 11204:1995 声学．机械装置及设备发出的噪声．工作位置和其它指定位置发射声压级测量．环境修正法

Specifies a method for measuring the emission sound pressure levels of machinery and equipment, at a work station and at other specified positions nearby, in any environment which meets certain qualification requirements. Emission sound pressure levels a

Acoustics - Noise emitted by machinery and equipment - Measurement of emission sound pressure levels at a work station and at other specified positions - Method requiring environmental corrections

SANS 11201:1995 声学．机器和设备发射的噪声．工作位置和其他指定位置发射声压级的测量．反射平面上基本无声波场的工程测试法

Specifies a method for measuring the emission sound pressure levels of machinery and equipment, at a work station and at other specified positions nearby, in an essentially free field over a reflecting plane. A work station is occupied by an operator. It

Acoustics - Noise emitted by machinery and equipment - Measurement of emission sound pressure levels at a work station and at other specified positions - Engineering method in an essentially free field over a reflecting plane

SANS 11202:1995 声学．机器和设备发射的噪声．工作位置和其他指定位置发射声压级的测量 现场简易法

Specifies a method for measuring the emission sound pressure levels of machinery and equipment, at a work station and at other specified positions nearby, in a semi-reverberant field. Emission sound pressure levels are measured as A-weighted and, if requ

Acoustics - Noise emitted by machinery and equipment - Measurement of emission sound pressure levels at a work station and at other specified positions - Survey method in situ

SANS 10843:1997 声学．单脉冲或系列脉冲的描述和物理测量的方法

Describes preferred methods for the description and the physical measurement of single impulsive sounds or short series of impulsive sounds and for the presentation of the data. It applies to single impulsive sounds or short series of impulsive sounds su

Acoustics - Methods for the description and physical measurement of single impulses or series of impulses

ANSI S2.21-1998 动态机械测量用标准材料的制备方法

This Standard applies to the preparation of a standard material for calibration of instruments for measuring the dynamic mechanical properties of viscoelastic materials. The purpose of this Standard is to assist users of dynamic mechanical test equipment

Method for Preparation of a Standard Material for Dynamic Mechanical Measurements

BS EN ISO 11689:1996 声学.机械和设备发射噪声数据的比较方法

This International Standard specifies a method for establishing the noise-control performance for a family, type, group or sub-group of machinery or equipment on the basis of noise-emission data. It is, in principle, applicable to any kind of machinery or equipment for which a noise test code exists or com-parable noise-emission data are available. NOTE 1 The general procedure described in this Inter-national Standard is, in principle, applicable to other physi-cal agents (e.g. vibration). This International Standard specifies methods and requirements for comparison of noise-emission data so that they can be used for the determination of noise-control performance. The methods presented allow evaluation of the noise emission of individual machines or of a single type of machine within a machine group, i.e. allow a compari-son of the acoustical aspects of machines with com-parable non-acoustical data and fields of application. Annex B gives examples of how the evaluation of collected noise-emission data for a machine group can be carried out.

Acoustics - Procedure for the comparison of noise-emission data for machinery and equipment

BS EN ISO 11689:1997 声学 机械和设备发射噪声数据的比较方法

Acoustics. Procedure for the comparison of noise-emission data for machinery and equipment