19.020 试验条件和规程综合 标准查询与下载

DB21/T 3144-2019 变温条件下的水工混凝土自生体积变形试验规程

Test procedure for autogenous volume deformation of hydraulic concrete under variable temperature conditions

ASTM D5854-19a 石油和石油产品液体样品的混合和处理标准实践

1.1 This practice covers handling, mixing, and conditioning procedures that are required to ensure that a representative sample of the liquid petroleum or petroleum product is delivered from the primary sample container or container or both into the analytical apparatus or into intermediate containers. 1.2 Appendix X1 details the background information on the development of Table 1 used in performance testing. Appendix X2 provides guidance in the acceptance testing for water in crude oil. Appendix X3 provides a guide for materials of sample containers. Appendix X4 provides a summary of recommended mixing procedures. Appendix X5 provides a flow chart for sample container/mixing system acceptance test. 1.3 For sampling procedures, refer to Practices D4057 (API MPMS Chapter 8.1) and D4177 (API MPMS Chapter 8.2). Practice D5842 (API MPMS Chapter 8.4) covers sampling and handling of light fuels for volatility measurement, and D8009 (API MPMS Chapter 8.5). 1.4 It is recommended that the users of this practice perform the tests in Practice D4177 (API MPMS Chapter 8.2) before performing the test in this practice. 1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.6 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Practice for Mixing and Handling of Liquid Samples of Petroleum and Petroleum Products

ASTM E2282-14(2019) 定义测试方法测试结果的标准指南

1.1 The purpose of this guide is to provide guidelines for identifying the elements that comprise the test result of a test method and to illustrate how these elements combine into the test result. 1.2 Types of measurement scales used for expressing observations and test results are discussed. 1.3 No system of units is specified in this standard. 1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Guide for Defining the Test Result of a Test Method

T/CSEE 0124-2019 架空输电线路杆塔基础静载试验方法

本标准规定了架空输电线路杆塔基础的竖向、水平、竖向与水平联合加载静载试验方法。 本标准适用于架空输电线路杆塔基础的静载试验。

Static load test method for tower foundation of overhead transmission line

ASTM D5358-93(2019) 用斗式或池式取样器取样的标准实施规程

1.1 This practice describes the procedure and equipment for taking surface samples of water or other liquids using a dipper. A pond sampler or dipper with extension handle allows the operator to sample streams, ponds, waste pits, and lagoons as far as 15 ft from the bank or other secure footing. The dipper is useful in filling a sample bottle without contaminating the outside of the bottle. 1.2 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.3 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Practice for Sampling With a Dipper or Pond Sampler

ASTM D5854-19 石油和石油产品液体样品的混合和处理标准实践

Standard Practice for Mixing and Handling of Liquid Samples of Petroleum and Petroleum Products

T/LZBX 005-2019 极地工况 工程机械带负载冷起动试验方法

1、测量设备仪器及精度要求：根据测试需要准备好所需的设备，即数据采集记录仪、电流钳、电压传感器、热电偶、发动机CAN信号/转速传感器、压力传感器、气压、湿度计、低温环境试验舱，并对测量设备的精度作出规定。 2、试验条件：主要从四个方面阐述，发动机条件要求（即柴油机使用的润滑油、润滑脂、燃油和冷却液的温度要求）；油品要求（即液压系统和传动系统的油品如何选择）；温度要求（监控测试目标油液油温和测试环境温度的要求）；试验环境条件（即规定试验环境温度、大气压等）。 3、试验准备：主要从四个方面阐述，即样机状态检查、测量参数、测点布置要求、测试调试。 4、试验过程：主要从四个方面阐述如何确定发动机起动成功。 5、安全要求：主要围绕操作过程中涉及的安全提出要求。 6、试验交付内容：包括起动结果、起动过程曲线图。

Polar condition, cold start test method of construction machinery on loaded

ASTM D6624-19 用流分析仪数据测定一批工艺流材料的流量比例平均特性值（FPAPV）的标准实施规程

Standard Practice for Determining a Flow-Proportioned Average Property Value (FPAPV) for a Collected Batch of Process Stream Material Using Stream Analyzer Data

ASTM D6259-15(2019) 用于确定测试方法的定量限定的标准实践

1.1 This practice covers the use of standard regression techniques and data from an interlaboratory study to determine a lower quantitative limit for a test method. This determined lower limit represents the numerical limit at or above which the test results are considered to be quantitatively meaningful for commerce or regulatory activities by this practice. It is defined by this standard as the pooled limit of quantitation (PLOQ) for the test method. 1.2 This practice is applicable to test methods that are capable of producing numerical test results close to zero. Examples are those test methods that determine quantitatively the concentration of analyte(s) near zero. 1.3 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Practice for Determination of a Pooled Limit of Quantitation for a Test Method

ASTM E2402-19 热失重分析仪的质量损失和残留物测量验证的标准试验方法

1.1 This test method provides procedures for validating mass loss, residue, and temperature measurements by thermogravimetric analyzers (TGAs) and analytical methods based upon the measurement of mass loss or residue content or temperature. Performance parameters determined include mass loss, residue, and temperature repeatability (precision), detection limit, quantitation limit, linearity, and bias. 1.2 Validation of apparatus performance and analytical methods is requested or required for quality initiatives or where results may be used for legal purposes. 1.3 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. 1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.5 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Test Method for Mass Loss and Residue Measurement Validation of Thermogravimetric Analyzers

T/ZZAS 001-2018 高功率锂离子蓄电池电性能测试方法

本标准规定了高功率锂离子蓄电池电性能测试方法，包括术语、定义、符号和电性能测试方法，本标准适用于启动电源、电动工具、航模等以高功率应用为目的的锂离子电池（简称电池）。主要技术内容如下： 序号　测试项目 1　容量测试　额定容量、-20℃容量、0℃容量、60℃容量 2　持续充放电功率性能测试　室温下充电性能、室温下放电性能、45℃下放电性能、0℃下放电性能、-20℃下放电性能 3　脉冲功率特性测试 4　自放电测试　室温自放电测试、高温55℃自放电测试 5　循环寿命测试　常规寿命测试、最大持续放电电流寿命测试

Test method for electrical performance of high power lithium-ion battery

T/ZZAS 002-2018 自动导引车用锂离子电池组性能要求及试验方法

本标准适用于以锂离子电池作为主要动力源的自动引导车，如叉车式运输型AGV，搬运型AGV，重载AGV，智能巡检AGV，特种AGV等。 本标准包含规范性引用文件、术语、定义和代号以及技术要求、检验标准、检验规则、包装、运输、和存储等。

Performance requirements and test methods of lithium-ion battery packs for automatic guided vehicles

T/ZKJXX 00004-2018 全球卫星导航系统测试用电磁环境技术规范

本标准规定了全球卫星导航系统测试用电磁环境的一般要求、技术要求、检验等内容。 本标准适用于全球卫星导航系统测试用电磁环境系统设计、制造、检验、验收和使用维护等过程。

Technical specification for electromagnetic environment for global navigation satellite system testing

T/SCTX T003-2018 电梯制动试验规则

规范电梯制动试验工作程序，降低试验风险，有效指导《电梯监督检验和定期检验规则——曳引与强制驱动电梯》（以下简称《检规》）中电梯制动试验相关项目的检验检测工作，规定了电力驱动的曳引驱动乘客电梯的制动试验的试验条件、试验工作程序、试验要求和方法、试验步骤、试验结果的观察、确认。

Experimental Rules For Elevator Braking

T/CSP 4-2018 颗粒技术 盐湖卤水 电池级碳酸锂

中国盐湖锂资源储量约占世界盐湖锂资源的1/3，占国内锂资源总量的85%左右。从盐湖卤水中制取电池级碳酸锂的技术转入工业化生产后，改变了我国生产碳酸锂所用原料严重依赖进口的问题。建立以盐湖卤水为原料生产的电池级碳酸锂产品标准为我国电池级碳酸锂产业的质量关键控制参数的分析和综合评估提供了依据；能满足下游电池生产企业的要求，也对电池级碳酸锂的生产机构、检测机构、科研院所和相关监督管理部门具有指导意义和参考价值。 本标准代表着当前的盐湖卤水中制取电池级碳酸锂的技术水平，测量方法更加合理，具有较强的可操作性，适应电池级碳酸锂行业发展。

Particle technology Salt lake brine Battery grade lithium carbonate

T/CERS 0003-2018 相变式储热装置储热性能衰减试验规程

本标准规定了相变式储热装置储热性能衰减的试验方法、计算和评价分级。 本标准适用于相变温度低于150℃的储热装置。

Testing regulations of performance attenuation on phase-change thermal energy storage unit

ASTM D6063-11(2018) 桶和类似容器抽样的现场人员标准指南

1.1 This guide covers information, including flow charts, for field personnel to follow in order to collect samples from drums and similar containers. 1.2 The purpose of this guide is to help field personnel in planning and obtaining samples from drums and similar containers, using equipment and techniques that will ensure that the objectives of the sampling activity will be met. It can also be used as a training tool. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. See specific warnings in 7.4.3 and 7.4.4. 1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Guide for Sampling of Drums and Similar Containers by Field Personnel

ASTM E1169-18 进行耐久性试验的标准实施规程

Standard Practice for Conducting Ruggedness Tests

ASTM E2486/E2486M-13(2018) PB和PI外部绝缘和表面处理系统（EIFS）的抗冲击性的标准测试方法

Standard Test Method for Impact Resistance of Class PB and PI Exterior Insulation and Finish Systems (EIFS)

T/CPCIF 0022-2018 管状输送带横向刚性和屈挠疲劳性能试验方法

本标准规定了管状输送带横向刚性和屈挠疲劳性能的试验方法。 本标准仅适用于圆形管状输送带。

Test method for transverse stiffness and flexural fatigue performance of tubular conveyor belts