试验条件和规程综合标准-分析测试百科网

JB/T 4160-2013 电工产品热带自然环境条件

本标准规定了在热带地区,包括湿热、亚湿热、干热(见图1)的环境条件。本标准适用于按GB/T 4797.1划分的热带地区一般用途的电工产品。

Natural environmental conditions appearring in the tropics for electric products

ICS: 19.020
CCS: K04
发布: 2013-12-31
实施: 2014-07-01

JB/T 4159-2013 热带电工产品通用技术要求

本标准规定了热带电工产品的气候防护类型、使用环境条件、环境技术要求、试验及验收要求、标志与包装等。本标准适用于热带地区(湿热带、亚湿热带、干热带)一般用途的电工产品。

General technical requirements of electric products for tropical environment

ICS: 19.020
CCS: K04
发布: 2013-12-31
实施: 2014-07-01

JB/T 9536-2013 户内户外防腐低压电器环境技术要求

本标准规定了户内、户外防腐低压电器(以下简称防腐电器)的防护类型、技术要求、试验方法、检验规则及标志与供应。本标准适用于户内和户外轻腐蚀、中等腐蚀和强腐蚀环境场所使用的防腐电器。

Environmental technical requirements for indoor and outdoor anti-corrosion low-voltage apparatus

ICS: 19.020
CCS: K34
发布: 2013-12-31
实施: 2014-07-01

JB/T 9535-2013 户内户外防腐电工产品环境技术要求

本标准规定了在各种户内、户外防腐蚀电工产品(以下简称防腐电工产品)的防护类型和使用环境条件、技术要求、试验方法、检验规则、标志、包装、运输、贮存与供应等。本标准未作规定及说明者,应符合各类防腐电工产品标准的规定。本标准适用于各类防轻腐蚀、防中等腐蚀和防强腐蚀电工产品。本标准不适用于防爆、船用等其他特殊环境电工产品。

Environmental technical requirements for indoor and outdoor anti-corrosion electric products

ICS: 19.020
CCS: K04
发布: 2013-12-31
实施: 2014-07-01

JB/T 9537-2013 户内户外防腐防爆异步电动机（机座号45-710）环境技术要求

本标准规定了户内、户外防腐防爆异步电动机(以下简称电动机)电动机的防护类型、使用环境条件、技术要求、试验方法、检验规则及标志等。本标准适用于中小型及小功率电动机,其范围规定为机座号45~710。

Environmental technical requirements for indoor and outdoor corrosion- resistant and explosion-protection induction motor (frame size 45~710)

ICS: 19.020
CCS: K25
发布: 2013-12-31
实施: 2014-07-01

JB/T 6743-2013 户内户外钢制电缆桥架防腐环境技术要求

本标准规定了在各种户内、户外环境使用的钢制电缆桥架(以下简称电缆桥架)环境条件、防护类型、技术要求、试验方法和检测规则。本标准适用于户内、户外腐蚀环境使用的钢制电缆桥架。

Corrosion-resistant environmental technical requirements for indoor and outdoor steel-made cable support system

ICS: 19.020
CCS: K13
发布: 2013-12-31
实施: 2014-07-01

GSO IEC 62059-32-1:2013 电力计量设备可靠性第32-1部分：耐久性通过施加高温测试计量特性的稳定性

The stability of metrological characteristics is one important aspect of durability. This part of IEC 62059 specifies a method for testing the stability of metrological characteristics of electricity meters, by operating a test specimen at the upper limit of the specified operating range of temperature, voltage and current for an extended period. Functional performance other than the accuracy of energy measurement is out of the scope of this standard. Note, that from the results of this test, no conclusion can be drawn for the length of period during which the stability of the metrological characteristics will be maintained when the meter is operated under usual conditions. This International Standard is applicable to all types of electricity meters in the scope of IEC TC 13.

Electricity metering equipment - Dependability - Part 32-1: Durability - Testing of the stability of metrological characteristics by applying elevated temperature

ICS: 19.020
CCS
发布: 2013-12-31
实施