19.040 环境试验 标准查询与下载

KS C 0275-2022 火灾危险测试第5部分：火灾废水潜在腐蚀损害的评估

Fire hazard testing Part 5 : Assessment of potentia1 corrosion damage by fire effluent

KS C IEC 60721-3-4-2022 环境条件分类.第3-4部分:环境参数组及其严重性的分类.在非气候保护位置的固定使用

Classification of environmental conditions — Part 3-4:Classification of groups of environmental parameters and their severities — Stationary use at non-weatherprotected locations

KS C IEC 60721-3-3:2022 环境条件分类.第3-3部分:环境参数组及其严重性的分类.在防风雨位置的固定使用

Classification of environmental conditions — Part 3-3:Classification of groups of environmental parameters and their severities — Stationary use at weatherprotected locations

KS C IEC 60721-3-3-2022 环境条件分类.第3-3部分:环境参数组及其严重性的分类.在防风雨位置的固定使用

Classification of environmental conditions — Part 3-3:Classification of groups of environmental parameters and their severities — Stationary use at weatherprotected locations

KS C IEC 60721-3-4:2022 环境条件分类.第3-4部分:环境参数组及其严重性的分类.在非气候保护位置的固定使用

Classification of environmental conditions — Part 3-4:Classification of groups of environmental parameters and their severities — Stationary use at non-weatherprotected locations

KS C IEC 60068-2-53-2022 环境测试 第2部分：测试 测试指南 Z/AFc 和 Z/BFc：组合温度（冷热和干热）和振动（正弦）测试

Environmental testing－Part 2：Tests－Guidance to tests Z/AFc and Z/BFc：Combined temperature(cold and dry heat) and vibration(sinusoidal) tests

KS C IEC 60068-2-17-2022 基本环境测试程序第2部分：TGests 测试Q：密封

Basic environmental testing procedures Part 2：TGests－Test Q：Sealing

KS C IEC 60068-2-27-2022 环境测试 第2部分：测试 测试Ea和指导：冲击

Environmental testing－Part 2：Tests－Test Ea and guidance：Shock

KS C 0214-2022 环境试验的试验方法标准

Test method standard for environmental tests

KS C 0276-2022 背景环境测试程序第2部分：测试 Kc 测试指南：触点和连接的二氧化硫测试

Background environmental testing procedures Part2 : Tests Guidance to Test Kc : Sulphur dioxide test for contacts and connections

KS C 6018-2022 电子元件的环境要求

Environmental Requirements for Electronic Components

KS C IEC 60068-3-1-2022 环境测试 第3-1部分：支持文件和指南 冷热和干热测试

Environmental testing — Part 3-1: Supporting documentation and guidance — Cold and dry heat tests

IEC TR 62131-8:2022 环境条件.电工设备的振动和冲击.第8部分:船舶运输

Environmental conditions – Vibration and shock of electrotechnical equipment - Part 8: Transportation by ship

KS C IEC 60068-2-52:2022 环境试验第2-52部分:试验Kb:循环盐雾（氯化钠溶液）

Environmental testing — Part 2-52: Tests — Test Kb:Salt mist, cyclic(sodium chloride solution)

KS C IEC 60068-2-52-2022 环境试验第2-52部分:试验Kb:循环盐雾（氯化钠溶液）

Environmental testing — Part 2-52: Tests — Test Kb:Salt mist, cyclic(sodium chloride solution)

KS C IEC 60068-2-11:2022 环境试验第2-11部分:试验Ka:盐雾

Environmental testing — Part 2-11: Tests —Test Ka: Salt mist

KS C IEC 60068-2-11-2022 环境试验第2-11部分:试验Ka:盐雾

Environmental testing — Part 2-11: Tests —Test Ka: Salt mist

GSO IEC 60068-2-85:2022 环境测试 第2-85部分：测试 测试 Fj：振动 长时间历史记录复制

IEC 60068-2-85:2019 demonstrates the adequacy of specimens to resist dynamic loads without unacceptable degradation of its functional and/or structural integrity when subjected to the specified vibration test requirements as defined by a time history (long time history replication). These can either be recorded in measurement exercises or generated artificially. In both cases, this method allows for generating a test tailored to very specific applications.

Environmental testing - Part 2-85: Tests - Test Fj: Vibration - Long time history replication

ASTM G217-16(2022) 用耦合多电极阵列传感器法在实验室和工厂进行腐蚀监测的标准指南

1.1 This guide outlines the procedure for conducting corrosion monitoring in laboratories and plants by use of the coupled multielectrode array sensor (CMAS) technique. 1.2 For plant applications, this technique can be used to assess the instantaneous non-uniform corrosion rate, including localized corrosion rate, on a continuous basis, without removal of the monitoring probes, from the plant. 1.3 For laboratory applications, this technique can be used to study the effects of various testing conditions and inhibitors on non-uniform corrosion, including pitting corrosion and crevice corrosion. 1.4 Units—The values stated in SI units are to be regarded as the standard. No other units of measurement are included in this standard. 1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.6 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Guide for Corrosion Monitoring in Laboratories and Plants with Coupled Multielectrode Array Sensor Method

ASTM F2109-01(2022) 测定飞机维修化学品对飞机座舱内部硬表面造成的颜色变化和染色的标准试验方法

1.1 This test method covers the determination of color change and staining from liquid solutions, such as cleaning or disinfecting chemicals or both, on painted metallic surfaces and nonmetallic surfaces of materials being used inside the aircraft cabin. The effects upon the exposed specimens are measured with the AATCC Gray Scale for Color Change and AATCC Gray Color Scale for Staining. NOTE 1—This test method is applicable to any colored nonmetallic hard surface in contact with liquids. The selected test specimens are chosen because these materials are present in the majority of aircraft cabin interiors. 1.2 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.3 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Test Method to Determine Color Change and Staining Caused by Aircraft Maintenance Chemicals upon Aircraft Cabin Interior Hard Surfaces