19.080 电工和电子试验 标准查询与下载

GOST R IEC 61010-031-2005 测量,控制与试验室用电气设备的安全性要求.第031部分:电力测量与测试的手持探测器总成的安全要求

Safety requirements for electrical equipment for measurement, control and laboratory use. Part 031. Safety requirements for hand-held probe assemblies for electrical measurement and test

CAN/CSA-C22.2 No.61010-2-032-2004(R2009) 测量、控制和实验室用电气设备的安全要求 第2-032部分：电气测试和测量用手持式和手动操作电流传感器的特殊要求

This National Standard of Canada is equivalent to International Standard CEI/IEC 61010-2-032:2002, second edition. 1 Scope and object This clause of part 1 is applicable, except as follows: 1.1 Scope Replacement: This International Standard applies to the HAND-HELD and hand-manipulated CURRENT SENSORS described below. These CURRENT SENSORS are for use in the measurement of current without physically opening the current path of the circuit being measured. They may be stand-alone CURRENT SENSORS or accessories to other equipment. CURRENT SENSORS require hand manipulation before or after a test or measurement, but do not necessarily need to be HAND-HELD during the test or measurement. Type A CURRENT SENSOR: a CURRENT SENSOR designed to be applied around or removed from uninsulated HAZARDOUS LIVE conductors. Type A CURRENT SENSORS have defined HAND-HELD or hand-manipulated parts providing protection against electric shock from the conductor being measured, and also have protection against short-circuits between wires and busbars during clamping. Type B CURRENT SENSOR: a CURRENT SENSOR which has protection against a short-circuit between wires or busbars during clamping but without defined HAND-HELD or handmanipulated parts which provide protection against electric shock during clamping. Additional protective means are necessary to avoid electric shock from HAZARDOUS LIVE conductors which cannot be de-energised during application or removal of the CURRENT SENSOR. NOTE Type B CURRENT SENSORS include flexible CURRENT SENSORS. Type C CURRENT SENSOR: a CURRENT SENSOR without protection against short-circuits between wires or busbars during clamping. Type C CURRENT SENSORS are intended to be applied to or removed from uninsulated HAZARDOUS LIVE conductors only when they are de-energised. NOTE Type C CURRENT SENSORS include some types of split-core transducers.

Safety Requirements for Electrical Equipment for Measurement, Control, and Laboratory Use - Part 2-032: Particular Requirements for Hand-Held and Hand-Manipulated Current Sensors for Electrical Test and Measurement

DIN VDE 0404-2 Berichtigung 1:2004 DIN VDE 0404-2-2002的技术勘误

Corrigendum to DIN VDE 0404-2 (VDE 0404 Teil 2):2002-05

DIN VDE 0404-1 Berichtigung 1:2004 DIN VDE 0404-1-2002的技术勘误

Corrigendum to DIN VDE 0404-1 (VDE 0404 Teil 1):2002-05

LST EN 60052-2003 通过标准气隙测量电压（IEC 60052:2002）

Voltage measurement by means of standard air gaps (IEC 60052:2002)

DS/EN 61340-2-1:2003 静电 第 2-1 部分：测量方法 材料和产品耗散静电荷的能力

This part of IEC 61340 describes test methods for measuring the rate of dissipation of static charge of insulating and static dissipative materials and products. It includes a generic description of test methods and detailed test procedures for specific applications.

Electrostatics - Part 2-1: Measurement methods - Ability of materials and products to dissipate static electric charge

DS/EN 60052:2003 通过标准气隙测量电压

IEC 60052 sets forth recommendations concerning the construction and use of standard air gaps for the measurement of peak values of the following four types of voltage: a) alternating voltages of power frequencies; b) full lightning impulse voltages; c) switching impulse voltages; d) direct voltages. Air gaps constructed and used in accordance with this publication are IEC standard measuring devices in accordance with IEC 60060-2 and primarily intended for performance checks of high voltage measuring systems.

Voltage measurement by means of standard air gaps

SANS 61010-031:2003 测量，控制和实验室用电气设备的安全性要求．第031部分：电气测量和试验用手持探测器组件的安全性要求

Applies to hand-held and hand-manupilated PROBE ASSEMBLIES of types A, B, and C, and related accessories which are intended for professional, industrial process and educational use. These PROBE ASSEMBLIES are for use in the interface between an electrica

Safety requirements for electrical equipment for measurement, control and laboratory use Part 031: Safety requirements for hand-held probe assemblies for electrical measurement and test

KS C IEC 60052-2003(2023) 标准构想帽电压测量方法

Standard Conception Cap Voltage Measurement Method

KS C IEC 60052-2003(2018) 电压测量方法

How to measure voltage using a standard spherical cap

KS C IEC 60052:2003 标准(空)气隙法测量电压

KS C IEC 60052는 다음과 같은 4가지 형태의 첨두 전압을 측정하기 위한 표준

Voltage measurement by means of standard air gaps

DS/EN 61010-2-032:2003 测量、控制和实验室用电气设备的安全要求 第 2-032 部分：用于电气测试和测量的手持式和手持式电流传感器的特殊要求

This International Standard applies to hand-held and hand-manipulated CURRENT SENSORS described below. These CURRENT SENSORS are for use in the measurement of current without opening physically opening the current path of the circuit being measured. They may be stand-alone CURRENT SENSORS or accessories to other equipment. CURRENT SENSORS require hand manipulation before or after a test or measurement, but do not necessarily need to be HAND-HELD during the test or measurement.

Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-032: Particular requirements for hand-held and hand-manipulated current sensors for electrical test and measurement

LST EN 61010-2-032-2003 测量、控制和实验室用电气设备的安全要求 第 2-032 部分：用于电气测试和测量的手持式和手持式电流传感器的特殊要求（IEC 61010-2-032:2002）

Safety requirements for electrical equipment for measurement, control, and laboratory use. Part 2-032: Particular requirements for hand-held and hand-manipulated current sensors for electrical test and measurement (IEC 61010-2-032:2002)

LST EN 61010-031-2003 测量、控制和实验室用电气设备的安全要求 第031部分：用于电气测量和测试的手持式探头组件的安全要求（IEC 61010-031:2002）

Safety requirements for electrical equipment for measurement, control and laboratory use. Part 031: Safety requirements for hand-held probe assemblies for electrical measurement and test (IEC 61010-031:2002)

KS C 4312-2002(2012) 变压器噪音水平测量方法

Measuring method of sound level for transformer

KS A IEC 60605-3-6-2002(2017) 设备可靠性试验第3部分:优选试验条件第6节:试验循环6:室外可移动设备低模拟度

Equipment reliability testing－Part 3：Preferred test conditions－Section 6：Test cycle 6：Outdoor transportable equipment－Low degree of simulation

KS A IEC 60605-3-6-2002(2022) 设备可靠性试验－第3部分:优选试验条件－第6节:试验循环6:室外移动设备－模拟程度低

Equipment reliability testing－Part 3：Preferred test conditions－Section 6：Test cycle 6：Outdoor transportable equipment－Low degree of simulation

KS A IEC 60605-3-4-2002(2022) 设备可靠性试验－第3部分:优选试验条件－第4节:试验循环4:便携式和非固定使用设备－模拟程度低

Equipment reliability testing－Part 3：Preferred test conditions－Section 4：Test cycle 4：Equipment for portable and non－stationary use－Low degree of simulation

KS A IEC 60605-3-4:2002 设备可靠性测试.第3章:标准测试条件.第4节:测试周期4:便携式和非固定设备.低级模拟试验装置

IEC 60605-3의 이 부분은 IEC 60605-1의 8.4에서 언급된 우선 시험 조건

Equipment reliability testing－Part 3：Preferred test conditions－Section 4：Test cycle 4：Equipment for portable and non－stationary use－Low degree of simulation

KS A IEC 60605-3-2:2002 设备可靠性测试.第3章:标准测试条件.防止气候变化保护场地用固定设备.高级模拟试验装置

이 규격은 IEC 60605-1의 8.4에서 언급하고 있는 표준/권장 시험 조건에 대하여

Equipment reliability testing-Part 3:Preferred test conditions-Equipment for stationary use in weatherprotected location-High degree of simulation