19.100 无损检测 标准查询与下载

ISO/ASTM CD 52948:2023 金属增材制造 无损检测和评估 PBF 零件缺陷分类

Additive manufacturing for metals — Non-destructive testing and evaluation — Imperfections classification in PBF parts

ISO/CD 15708-3:2023 无损检测计算机断层扫描辐射方法第3部分：操作和解释

Non-destructive testing — Radiation methods for computed tomography — Part 3: Operation and interpretation

ISO/CD 15708-4:2023 无损检测 计算机断层扫描辐射方法 第 4 部分：资格

Non-destructive testing — Radiation methods for computed tomography — Part 4: Qualification

ISO/CD 15708-2:2023 无损检测计算机断层扫描辐射方法第2部分：原理、设备和样品

Non-destructive testing — Radiation methods for computed tomography — Part 2: Principles, equipment and samples

23/30469256 DC BS EN ISO 16946 无损检测 超声波检测 阶梯楔块校准块规范

BS EN ISO 16946. Non-destructive testing. Ultrasonic testing. Specification for a step wedge calibration block

ASTM E3370-23 复合材料、夹层芯结构和金属的矩阵阵列超声波试验的标准实施规程

Standard Practice for Matrix Array Ultrasonic Testing of Composites, Sandwich Core Constructions, and Metals

ASTM E1901-23 用接触脉冲回波直波束超声方法检测和评定不连续性的标准指南

1.1 This guide covers procedures for the contact ultrasonic examination of bulk materials or parts by transmitting pulsed ultrasonic waves into the material and observing the indications of reflected waves. This guide covers only examinations in which one search unit is used as both transmitter and receiver (pulse-echo). This guide includes general requirements and procedures that may be used for detecting discontinuities, locating depth and distance from a point of reference and for making a relative or approximate evaluation of the size of discontinuities as compared to a reference standard. 1.2 This guide complements Practice E114 by providing more detailed procedures for the selection and standardization of the examination system and for evaluation of the indications obtained. 1.3 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. 1.4 This guide does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this guide to establish the appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.5 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Guide for Detection and Evaluation of Discontinuities by Contact Pulse-Echo Straight-Beam Ultrasonic Methods

ISO/DIS 16946:2023 无损检测 超声波检测 阶梯楔块校准块规范

Non-destructive testing — Ultrasonic testing — Specification for a step wedge calibration block

ISO/DIS 32543-1:2023 无损检测 工业 X 射线系统焦点特性 第 1 部分：针孔相机射线照相方法

Non-destructive testing — Characteristics of focal spots in industrial X-ray systems — Part 1: Pinhole camera radiographic method

ISO/FDIS 24367:2023 无损检测 声发射检测 金属压力设备

Non-destructive testing — Acoustic emission testing — Metallic pressure equipment

ISO/CD 18563-2:2023 无损检测 超声相控阵设备的表征和验证 第 2 部分：探头

Non-destructive testing — Characterization and verification of ultrasonic phased array equipment — Part 2: Probes

T/CSTM 00666-2023 无损检测 钢材 钢锭超声波探伤检测方法

本文件规定了纵波技术对钢锭作接触法脉冲反射式超声波检验的方法，包括检测人员、超声仪器、探头及试块、检测方法、质量等级和试验报告。 本文件适用于电弧炉、中频感应炉、连铸坯及电渣锭等冶炼钢锭内部质量的超声波检测分级方法，钢锭内部缺陷检测类型分为心部缺陷、偏析缺陷和皮下缺陷。

Non-destructive testing –Steel products –Ultrasonic testing method for steel ingot

ASTM E2934-23 涡流（EC）试验方法无损评价（DICONDE）中数字成像和通信的标准实施规程

1.1 This practice covers the interoperability of eddy current imaging and data acquisition equipment by specifying the image data transfer and archival storage in commonly accepted terms. This document is intended to be used in conjunction with Practice E2339 on Digital Imaging and Communication in Nondestructive Evaluation (DICONDE). Practice E2339 defines an industrial adaptation of NEMA PS3 / ISO 12052, an international standard for image data acquisition, review, storage, and archival storage. The goal of Practice E2339, commonly referred to as DICONDE, is to provide a standard that facilitates the display and analysis of NDE results on any system conforming to the DICONDE standard. Toward that end, Practice E2339 provides a data dictionary and a set of information modules that are applicable to all NDE modalities. This practice supplements Practice E2339 by providing information object definitions, information modules, and a data dictionary that are specific to eddy current test methods. 1.2 This practice has been developed to overcome the issues that arise when analyzing or archiving data from eddy current test equipment using proprietary data transfer and storage methods. As digital technologies evolve, data must remain decipherable through the use of open, industry-wide methods for data transfer and archival storage. This practice defines a method where all the eddy current technique parameters and inspection data are communicated and stored in a standard manner regardless of changes in digital technology. 1.3 This practice does not specify: 1.3.1 A testing or validation procedure to assess an implementation’s conformance to the standard, 1.3.2 The implementation details of any features of the standard on a device claiming conformance, or 1.3.3 The overall set of features and functions to be expected from a system implemented by integrating a group of devices each claiming DICONDE conformance. 1.4 Units—Although this practice contains no values that require units, it does describe methods to store and communicate data that do require units to be properly interpreted. The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. 1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.6 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Practice for Digital Imaging and Communication in Nondestructive Evaluation (DICONDE) for Eddy Current (EC) Test Methods

ASTM E2663-23 超声波试验方法无损评价中数字成像和通信的标准实施规程（DICONDE）

1.1 This practice covers the interoperability of ultrasonic imaging equipment by specifying image data transfer and archival storage methods in commonly accepted terms. This document is intended to be used in conjunction with Practice E2339. Practice E2339 defines an industrial adaptation of NEMA PS3 ⁄ ISO 12052 (DICOM, see http:// medical.nema.org), an international standard for image data acquisition, review, transfer, and archival storage. The goal of Practice E2339, commonly referred to as DICONDE, is to provide a standard that facilitates the display and analysis of NDE test results on any system conforming to the DICONDE standard. Toward that end, Practice E2339 provides a data dictionary and set of information modules that are applicable to all NDE modalities. This practice supplements Practice E2339 by providing information object definitions, information modules, and data dictionary that are specific to ultrasonic test methods. 1.2 This practice has been developed to overcome the issues that arise when analyzing or archiving data from ultrasonic test equipment using proprietary data transfer and storage methods. As digital technologies evolve, data must remain decipherable through the use of open, industry-wide methods for data transfer and archival storage. This practice defines a method where all the ultrasonic technique parameters and test results are communicated and stored in a standard format regardless of changes in digital technology. 1.3 This practice does not specify: 1.3.1 A testing or validation procedure to assess an implementation’s conformance to the standard. 1.3.2 The implementation details of any features of the standard on a device claiming conformance. 1.3.3 The overall set of features and functions to be expected from a system implemented by integrating a group of devices each claiming DICONDE conformance. 1.4 Although this practice contains no values that require units, it does describe methods to store and communicate data that do require units to be properly interpreted. The SI units required by this practice are to be regarded as standard. No other units of measurement are included in this standard. 1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.6 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Practice for Digital Imaging and Communication in Nondestructive Evaluation (DICONDE) for Ultrasonic Test Methods

T/CSTM 00664-2023 无损检测 短棒材点式涡流检测方法

本文件规定了短棒材点式（单线圈式或阵列式）涡流检测的人员要求、检测系统、试样、检测程序、检测结果评价及检测报告。 本文件适用于直径10mm至50mm，长度不大于2m，采用锻造、挤压和轧制等成型工艺制备的金属短棒材的点式涡流检测。

Nondestructive testing—Point eddy current testing of short bars

T/CSTM 00701-2023 无损检测 超声检测 凹曲面斜入射试块的制作与检验方法

本文件规定了凹曲面斜入射试块的术语和定义、尺寸、材料、制备，标记、使用方法以及证书。 本文件适用于空心类锻件、管件或棒类件等的内孔表面周向方向斜入射超声波探伤水平、垂直、声程的精确定位。本文件提供了一种可以对内孔表面周向斜探测凹曲面锻件角度、声速及零点标定的方法。

Non-destructive testing – Ultrasonic testing –Fabrication and testing method of oblique incident test block with concave surface

T/CSTM 00665-2023 无损检测 金属元件间间隙电磁检测方法

本文件规定了金属元件间间隙电磁检测的方法原理、安全警示、人员资格、检测系统、检测程序以及检测报告。 本文件适用于金属元件间间隙为1.2mm~5.0mm的电磁检测。

Non-destructive testing—Electromagnetic method to test gaps between two metal pieces

T/CSTM 00697-2023 无损检测 超声检测 井口和采油树产品堆焊层超声波检测方法

本文件规定了油气井口设备中管形部件和阀体部件（以下统称部件）内孔表面或外表面奥氏体不锈钢或镍基合金等堆焊层超声检测的要求。 本文件适用于油气井口设备在生产、制造、安装和修复中的部件内孔直径大于50 mm，堆焊层厚度为3 mm～25 mm的堆焊熔敷层、熔接层和热影响区的手动或自动检测。其他设备部件堆焊层的检测可参照本文件执行。

Non-destructive testing – Ultrasonic testing –Ultrasonic testing method for weld overlay of wellhead and tree products

ASTM E2491-23 评定相控阵超声检测仪器和系统性能特性的标准指南

1.1 This guide covers procedures for evaluating some performance characteristics of phased-array ultrasonic examination instruments and systems. 1.2 Evaluation of these characteristics is intended to be used for either comparing instruments and systems or, by periodic repetition, for detecting long-term changes in the characteristics of a given instrument or system. Significant changes may be indicative of impending failure, and, if beyond certain limits, will require corrective maintenance. Some electronic instrument characteristics in phased-array units are similar to non-phased-array units and may be measured as described in Practice E1065 or Guide E1324. 1.3 Ultrasonic examination systems using pulsed-wave trains and A-scan presentation (rf or video) may be evaluated. 1.4 This guide establishes no performance limits for examination systems; if such acceptance criteria are required, these shall be specified by the using parties. Where acceptance criteria are implied herein, they are for example only and are subject to more or less restrictive limits imposed by customer’s and end user’s controlling documents. 1.5 The specific parameters to be evaluated, conditions, frequency of test, and report data required shall be determined by the user. 1.6 This guide may be used for the evaluation of a complete examination system, including search unit, instrument, interconnections, scanner fixtures, connected alarm, and auxiliary devices. This guide is not intended to be used as a substitute for calibration or standardization of an instrument or system to inspect any given material. 1.7 Required test apparatus includes selected test blocks and position encoders in addition to the instrument or system to be evaluated. 1.8 Alternate procedures, such as examples described in this document, or others, may only be used with customer approval. 1.9 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. 1.10 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.11 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Guide for Evaluating Performance Characteristics of Phased-Array Ultrasonic Testing Instruments and Systems

ASTM E1815-18(2023) 工业射线照相胶片系统分类的标准测试方法

Standard Test Method for Classification of Film Systems for Industrial Radiography