19.100 无损检测 标准查询与下载
共找到 2159 条与 无损检测 相关的标准，共 144 页
This document specifies a method of penetrant testing used to detect discontinuities, e.g. cracks, laps, folds, porosity and lack of fusion, which are open to the surface of the material to be tested using white light or UV-A (365 nm) radiation. It is mainly applied to metallic materials, but can also be performed on other materials, provided that they are inert to the test media and not excessively porous (castings, forgings, welds, ceramics, etc.) This document also includes requirements for process and control testing, but is not intended to be used for acceptance criteria. It gives neither information relating to the suitability of individual test systems for specific applications nor requirements for test equipment. NOTE 1 Methods for determining and monitoring the essential properties of penetrant testing products to be used are specified in ISO 3452-2 and ISO 3452-3. NOTE 2 The term "discontinuity" is used in this document in the sense that no evaluation concerning acceptability or non-acceptability is included. NOTE 3 CEN/TR 16638 addresses penetrant testing using actinic blue light.
Non-destructive testing - Penetrant testing - Part 1: General principles
- ICS
- 19.100
- CCS
- H26
- 发布
- 2021-05-00
- 实施
This document specifies the technical requirements and test procedures for penetrant materials for their type testing and batch testing. This document covers the temperature range from 10 °C to 50 °C. Additional tests in ISO 3452-5 or ISO 3452-6 can be required outside this range. On-site control tests and methods are detailed in ISO 3452-1.
Non-destructive testing - Penetrant testing - Part 2: Testing of penetrant materials
- ICS
- 19.100
- CCS
- H26
- 发布
- 2021-05-00
- 实施
本文件是T/CNEA 103《压水堆承压部件 无损检测》的第6部分。本文件共计9章，其中，1-3章为规范性条款，4-9章为压水堆承压部件 无损检测 第6部分：涡流检测主要内容。主要内容包括：一般要求、检测设备、检测条件、设备调整和复核、检测技术和检测报告。
PWR pressure boundary components—Non-destructive testing— Part6:Eddy current testing
- ICS
- 19.100
- CCS
- D441
- 发布
- 2021-04-26
- 实施
- 2022-03-10
本文件是T/CNEA 103《压水堆承压部件 无损检测》的第3部分。本文件共计10章，其中，1-3章为规范性条款，4-10章为压水堆承压部件 无损检测 第3部分：射线检测主要内容。主要内容包括：一般要求、主要设备和器材、检测技术、胶片的暗室处理、射线底片质量、缺陷评定及质量分级和检测报告。
PWR pressure boundary components—Non-destructive testing— Part3:Radiographic testing
- ICS
- 19.100
- CCS
- D441
- 发布
- 2021-04-26
- 实施
- 2022-03-10
本文件是T/CNEA 103《压水堆承压部件 无损检测》的第4部分。本文件共计8章，其中，1-3章为规范性条款，4-8章为压水堆承压部件 无损检测 第4部分：渗透检测主要内容。主要内容包括：一般要求、渗透检测设备和材料、检测方法、渗透检测操作方法和检测报告。
PWR pressure boundary components—Non-destructive testing— Part4:Penetrant testing
- ICS
- 19.100
- CCS
- D441
- 发布
- 2021-04-26
- 实施
- 2022-03-10
本文件是T/CNEA 103《压水堆承压部件 无损检测》的第7部分。本文件共计9章，其中，1-3章为规范性条款，4-9章为压水堆承压部件 无损检测 第7部分：目视检测主要内容。主要内容包括：一般要求、目视检测设备和器材、目视检测方法、检测过程、评定和记录和检测报告。
PWR pressure boundary components—Non-destructive testing— Part7:Visual testing
- ICS
- 19.100
- CCS
- D441
- 发布
- 2021-04-26
- 实施
- 2022-03-10
本文件是T/CNEA 103《压水堆承压部件 无损检测》的第5部分。本文件共计10章，其中，1-3章为规范性条款，4-10章为压水堆承压部件 无损检测 第5部分：磁粉检测主要内容。主要内容包括：一般要求、磁粉检测设备和器材、校准和核查、磁化电流、检测方法、检测过程和检测报告。
PWR pressure boundary components—Non-destructive testing— Part5:Magnetic particle testing
- ICS
- 19.100
- CCS
- D441
- 发布
- 2021-04-26
- 实施
- 2022-03-10
本文件是T/CNEA 103《压水堆承压部件 无损检测》的第8部分。本文件共计7章，其中，1-3章为规范性条款，4-7章为压水堆承压部件 无损检测 第8部分：泄漏检测主要内容。主要内容包括：一般要求、设备和器材、检测方法和技术和检测报告。
PWR pressure boundary components—Non-destructive testing— Part8:Leak testing
- ICS
- 19.100
- CCS
- D441
- 发布
- 2021-04-26
- 实施
- 2022-03-10
本文件是T/CNEA 103《压水堆承压部件 无损检测》的第2部分。本文件共计8章，其中，1-3章为规范性条款，4-8章为压水堆承压部件 无损检测 第2部分：超声检测主要内容。主要内容包括：一般要求、材料超声检测方法、全焊透焊接接头超声检测方法、堆焊层和预堆边超声检测方法和检测报告和记录。
PWR pressure boundary components—Non-destructive testing— Part2:Ultrasonic testing
- ICS
- 19.100
- CCS
- D441
- 发布
- 2021-04-26
- 实施
- 2022-03-10
Non-destructive testing of pressure equipment Part 15: Phased array ultrasonic testing
- ICS
- 19.100
- CCS
- H26
- 发布
- 2021-04-26
- 实施
- 2021-08-26
本文件是T/CNEA 103《压水堆承压部件 无损检测》的第1部分。本文件共计7章，其中，1-3章为规范性条款，4-7章为压水堆承压部件 无损检测 第1部分：通用要求主要内容。主要内容包括：使用原则、一般要求、记录、评定及质量分级和检测记录和报告。
PWR pressure boundary components—Non-destructive testing— Part1:General requirements
- ICS
- 19.100
- CCS
- D441
- 发布
- 2021-04-26
- 实施
- 2022-03-10
Non-destructive testing – Characteristics of focal spots in industrial X-ray systems for use in non-destructive testing – Part 2: Pinhole camera radiographic method
- ICS
- 19.100
- CCS
- 发布
- 2021-04-21
- 实施
- 2021-04-21
Non-destructive testing - Characterization and verification of ultrasonic test equipment - Part 3: Combined equipment (ISO 22232-3:2020)
- ICS
- 19.100
- CCS
- 发布
- 2021-04-15
- 实施
- 2021-04-15
1.1?This test method covers the determination of total volatile sulfur in gaseous hydrocarbons and liquefied petroleum (LP) gases. It is applicable to analysis of natural, processed, and final product materials. Precision has been determined for sulfur in gaseous hydrocarbons in
Standard Test Method for Determination of Total Volatile Sulfur in Gaseous Hydrocarbons and Liquefied Petroleum Gases by Ultraviolet Fluorescence
- ICS
- 19.100
- CCS
- 发布
- 2021-04-01
- 实施
Non-destructive testing - Characteristics of focal spots in industrial X-ray systems for use in non-destructive testing - Part 2: Pinhole camera radiographic method
- ICS
- 19.100
- CCS
- 发布
- 2021-04-00
- 实施
Non-destructive testing -- Characterization and verification of ultrasonic test equipment -- Part 3: Combined equipment (ISO 22232-3:2020)
- ICS
- 19.100
- CCS
- 发布
- 2021-03-31
- 实施
- 2021-03-31
Non-destructive testing — Image quality of radiographs —Part 2: Determination of the image quality value using step/hole-type image quality indicators
- ICS
- 19.100
- CCS
- 发布
- 2021-03-25
- 实施
Non-destructive testing — Image quality of radiographs —Part 1: Determination of the image quality value using wire-type image quality indicators
- ICS
- 19.100
- CCS
- 发布
- 2021-03-25
- 实施
Non-destructive testing — Image quality of radiographs —Part 1: Determination of the image quality value using wire-type image quality indicators
- ICS
- 19.100
- CCS
- 发布
- 2021-03-25
- 实施
Non-destructive testing — Image quality of radiographs —Part 4: Experimental evaluation of image quality values and image quality tables
- ICS
- 19.100
- CCS
- 发布
- 2021-03-25
- 实施
