19.100 无损检测 标准查询与下载

ASTM E915-19 残余应力测量用X射线衍射仪校准验证的标准试验方法

Standard Test Method for Verifying the Alignment of X-Ray Diffraction Instrumentation for Residual Stress Measurement

ASTM A1038-19 超声波接触阻抗法测定便携式硬度的标准试验方法

1.1 This test method covers the determination of comparative hardness values by applying the Ultrasonic Contact Impedance Method (UCI Method). 1.2 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. 1.2.1 Exception—Informational inch-pound units are provided in Note 1 and ksi is used in 12.1. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Test Method for Portable Hardness Testing by the Ultrasonic Contact Impedance Method

ISO/TS 25107:2019 无损检测-无损检测培训大纲

Non-destructive testing — NDT training syllabuses

ISO 12718:2019 无损检测.涡流检测.词汇

Non-destructive testing — Eddy current testing — Vocabulary

ASTM E2983-14(2019) 声发射结构健康监测应用标准指南

1.1 Structural Health Monitoring (SHM) is a field of engineering that deals with diagnosis and monitoring of structures during their operation. The primary goal of SHM is detection, identification, assessment, and monitoring of flaws or fault conditions that affect or may affect the future safety or performance of structures. SHM combines elements of nondestructive testing and evaluation, condition/process monitoring, statistical pattern recognition, and physical modeling. 1.2 The acoustic emission (AE) method uniquely fits the concept of SHM due to its capabilities to periodically or continuously examine structures and assess structural integrity during their normal operation. 1.3 In this guide, the definitions and fundamental principles for applying the AE method for SHM tasks are elaborated. This includes: 1.3.1 Terminology and definitions of SHM by the AE method, 1.3.2 Outline the recommended process of AE-SHM, and 1.3.3 Fundamental requirements regarding development of the SHM procedures, including selection of appropriate AE apparatus, data acquisition and analysis methods, diagnosis, monitoring and prediction. 1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.5 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Guide for Application of Acoustic Emission for Structural Health Monitoring

BS EN ISO 16809:2019 非破坏性测试 超声波测厚

1   Scope This document specifies the principles for ultrasonic thickness measurement of metallic and non-metallic materials by direct contact, based on measurement of time of flight of ultrasonic pulses only.

Non-destructive testing. Ultrasonic thickness measurement

DB41/T 1827-2019 压力管道环向焊接接头相控阵超声检测规范

Specification for Phased Array Ultrasonic Testing of Circumferential Welded Joints of Pressure Piping

BS EN ISO 15549:2019 非破坏性测试 涡流检测 一般原则

What is  ISO 15549   about?      ISO 15549 defines the general principles to be applied to non-destructive eddy current examination of products and materials in order to ensure defined and repeatable performance.   ISO 15549 includes guidelines for the preparation of application documents that describe the specific requirements for the application of the eddy current method to a particular type of product.     Who is  ISO 15549 for?

Non-destructive testing. Eddy current testing. General principles

T/GDCKCJH 001-2019 常压金属储罐底板腐蚀检测及评价

本标准对常压金属储罐底板腐蚀检测主要检测方法类型、方法选择、其他辅助检测方法进行了概述。规定了在常压金属储罐底板腐蚀检测的检测人员、设备和器材、检测工艺文件、安全要求内容。规定了在线检测前准备、检测条件确定、传感器布置、系统调试、背景噪声测量、数据采集、检测结果及评价内容。规定了开罐检测前准备、检测条件确定、仪器调试、系统校准、开罐检测方法、检测结果及评价内容。详细规定了检测报告至少应记录的内容。

Corrosion testing and evaluation of atmospheric pressure metal storage tank floor

EN ISO 15549:2019 无损检测.涡流探伤.一般原则

This document defines the general principles to be applied to non-destructive eddy current examination of products and materials in order to ensure defined and repeatable performance. It includes guidelines for the preparation of application documents which describe the specific requirements for the application of the eddy current method to a particular type of product.

Non-destructive testing - Eddy current testing - General principles (ISO 15549:2019)

ASTM E545-19 直接热中子射线照相检验中图像质量测定的标准试验方法

1.1 This test method covers the use of an Image Quality Indicator (IQI) system to determine the relative2 quality of radiographic images produced by direct, thermal neutron radiographic examination. The requirements expressed in this test method are not intended to control the quality level of materials and components. 1.2 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Test Method for Determining Image Quality in Direct Thermal Neutron Radiographic Examination

ASTM E2024/E2024M-11(2019) 用热导检漏仪测量大气泄漏的标准实施规程

1.1 This practice covers procedures for detecting the sources of gas leaking at the rate of 1 × 10–5 Pa m3 /s (1 × 10–4 standard cm3 /s) or greater. The tests may be conducted on any object that can be pressurized with a tracer gas that is detectable by a thermal conductivity detector. The test sensitivity will vary widely depending on the tracer gas used. 1.2 Units—The values stated in either SI or std-cc/sec units are to be regarded separately as standard. The values stated in each system may not be exact equivalents: therefore, each system shall be used independently of the other. Combining values from the two systems may result in non-conformance with the standard. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Practice for Atmospheric Leaks Using a Thermal Conductivity Leak Detector

ASTM E2985/E2985M-14(2019) 基于共振超声光谱的弹性常数测量测定金属纯度的标准实施规程

1.1 This practice is intended for use with resonant ultrasound spectrometers capable of exciting, measuring, recording, and analyzing multiple whole body mechanical vibration resonant frequencies within parts exhibiting acoustical ringing in the acoustic or ultrasonic, or both, resonant frequency ranges. 1.2 This practice uses Resonant Ultrasound Spectroscopy (RUS) to distinguish conforming parts, as determined from qualified training sets, from those containing significant anomalies in their elastic properties. 1.3 The basic functions of a RUS monitoring system are to detect and classify resonance phenomena. Solid structure resonances are governed by the part’s dimensions, density, and elastic properties. When a material substitution occurs in a precious metal, the chosen metals have almost identical densities and unchanged dimensions, leaving only the elastic properties to affect the resonances. 1.4 This practice can be used to replace destructive methods, which damage the test object through drilling or melting, or both. 1.5 The values stated in either SI units or inch-pound units are to be regarded separately as standard. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in non-conformance with the standard. 1.6 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.7 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Practice for Determination of Metal Purity Based on Elastic Constant Measurements Derived from Resonant Ultrasound Spectroscopy

ASTM D6667-14(2019) 用紫外线荧光法测定气态烃和液化石油气中总挥发性硫的标准试验方法

Standard Test Method for Determination of Total Volatile Sulfur in Gaseous Hydrocarbons and Liquefied Petroleum Gases by Ultraviolet Fluorescence

ASTM E748-19 材料的热中子射线照相术的标准指南

1.1 Purpose—Practices to be employed for the radiographic examination of materials and components with thermal neutrons are outlined herein. They are intended as a guide for the production of neutron radiographs that possess consistent quality characteristics, as well as aiding the user to consider the applicability of thermal neutron radiology. Statements concerning preferred practice are provided without a discussion of the technical background for the preference. The necessary technical background can be found in Refs (1-16).2 1.2 Limitations—Acceptance standards have not been established for any material or production process (see Section 5 on Basis of Application). Adherence to the guide will, however, produce reproducible results. Neutron radiography, whether performed by means of a reactor, an accelerator, subcritical assembly, or radioactive source, will be consistent in sensitivity and resolution only if the consistency of all details of the technique, such as neutron source, collimation, geometry, film, etc., are maintained. This guide is limited to the use of photographic or radiographic film in combination with conversion screens for image recording; other imaging systems are available. Emphasis is placed on the use of nuclear reactor neutron sources. 1.3 Interpretation and Acceptance Standards— Interpretation and acceptance standards are not covered by this guide. Designation of accept-reject standards is recognized to be within the cognizance of product specifications. 1.4 Safety Practices—General practices for personnel protection against neutron and associated radiation peculiar to the neutron radiologic process are discussed in Section 18. Jurisdictional nuclear regulations will also apply. 1.5 Other Aspects of the Neutron Radiographic Process— For many important aspects of neutron radiography such as technique, files, viewing of radiographs, storage of radiographs, film processing, and record keeping, refer to Guide E94, which covers these aspects for X-ray radiography. (See Section 2.) 1.6 The values stated in either SI or inch-pound units are to be regarded as the standard. 1.7 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.8 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Guide for Thermal Neutron Radiography of Materials

ISO 15549:2019 非破坏性测试 - 涡流测试 - 一般原则

This document defines the general principles to be applied to non-destructive eddy current examination of products and materials in order to ensure defined and repeatable performance. It includes guidelines for the preparation of application documents which describe the specific requirements for the application of the eddy current method to a particular type of product.

Non-destructive testing — Eddy current testing — General principles

T/ZJBX 01-2019 现场金相复型操作规范

本标准规定了现场金相复型操作规范的术语和定义、人员要求、技术准备、金相试样的制备、安全措施、金相复型技术操作、金相显微组织的显相及记录与报告。 本标准适用于常用钢材(碳素钢、低合金珠光体钢、合金结构钢、马氏体钢、奥氏体钢等)的金属部件和焊缝进行非破坏的微观组织的检验。

Operating specifications of field metallographic replica

ASTM E996-19 俄歇电子能谱和X射线光电子能谱中数据报告的标准实施规程

1.1 Auger and X-ray photoelectron spectra are obtained using a variety of excitation methods, analyzers, signal processing, and digitizing techniques. 1.2 This practice lists the desirable information that shall be reported to fully describe the experimental conditions, specimen conditions, data recording procedures, and data transformation processes. 1.3 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. 1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.5 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Practice for Reporting Data in Auger Electron Spectroscopy and X-ray Photoelectron Spectroscopy

KS B ISO 16810:2019 无损检测超声波检测总则

Non-destructive testing ― Ultrasonic testing ― General principles

KS B ISO 16811-2019 非破坏性测试 - 超声波测试 - 灵敏度和范围设置

Non-destructive testing — Ultrasonic testing — Sensitivity and range setting