19.100 无损检测 标准查询与下载

ASTM E2223-13(2018)e1 用角束超声波检查无缝充气钢制压力容器的标准实施规程

Standard Practice for Examination of Seamless, Gas-Filled, Steel Pressure Vessels Using Angle Beam Ultrasonics

ISO 20769-1:2018 无损检测.X射线和伽马射线对管道腐蚀和沉积物的射线照相检验.第1部分：切向射线照相检验

Non-destructive testing - Radiographic inspection of corrosion and deposits in pipes by X- and gamma rays - Part 1: Tangential radiographic inspection

ISO 20769-2:2018 无损检测.X射线和伽马射线对管道腐蚀和沉积物的射线照相检验.第2部分：双壁射线照相检验

Non-destructive testing - Radiographic inspection of corrosion and deposits in pipes by X- and gamma rays - Part 2: Double wall radiographic inspection

JIS Z 2324-1:2018 无损检测 加工孔内径面自动检测系统 第1部分：标准试块

Non-destructive testing -- Automatic inspection system for inner diameter surface of machining holes -- Part 1: Standard test blocks

BS EN 17119:2018 无损检测 热成像测试 主动热成像

Non-destructive testing. Thermographic testing. Active thermography

EN 17119:2018 无损检测 热成像测试 主动热成像

Non-destructive testing - Thermographic testing - Active thermography

ISO 19232-5:2018 无损检验.辐射摄影的图像质量.第5部分:图像质量显示器(双线型).图像不清晰值的测定

This document specifies a method of determining the total image unsharpness and basic spatial resolution of radiographs and radioscopic images. The IQI with up to 13 wire pairs can be used effectively with tube voltages up to 600 kV. The IQI with more than 13 wire pairs can be used effectively at tube voltages lower than 225 kV. When using source voltages in the megavolt range, it is possible that the results are not be completely satisfactory.

Non-destructive testing - Image quality of radiographs - Part 5: Determination of the image unsharpness and basic spatial resolution value using duplex wire-type image quality indicators

ASTM E2192-13(2018) 超声波平面缺陷高度尺寸标准指南

Standard Guide for Planar Flaw Height Sizing by Ultrasonics

ASTM E1901-18 用接触脉冲回波直束超声法检测和评定不连续性的标准指南

1.1 This guide covers procedures for the contact ultrasonic examination of bulk materials or parts by transmitting pulsed ultrasonic waves into the material and observing the indications of reflected waves. This guide covers only examinations in which one search unit is used as both transmitter and receiver (pulse-echo). This guide includes general requirements and procedures that may be used for detecting discontinuities, locating depth and distance from a point of reference and for making a relative or approximate evaluation of the size of discontinuities as compared to a reference standard. 1.2 This guide complements Practice E114 by providing more detailed procedures for the selection and standardization of the examination system and for evaluation of the indications obtained. 1.3 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. 1.4 This guide does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this guide to establish the appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.5 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Guide for Detection and Evaluation of Discontinuities by Contact Pulse-Echo Straight-Beam Ultrasonic Methods

ASTM E3169-18 无损评价中数字成像和通信的标准指南

1.1 The display, transfer and storage of digital nondestructive evaluation data in a common, open format is necessary for the effective interpretation and preservation of evaluation results. ASTM International has developed common open standards for Digital Imaging and Communication in Nondestructive Evaluation (DICONDE) based on the ubiquitous healthcare industry standard Digital Imaging and Communication in Medicine (DICOM). This guide provides an overview of the ASTM International standard practices that address DICONDE and assistance in identifying the correct standard practices for different use cases. 1.2 This document provides an overview of how to utilize the ASTM DICONDE standard practices found in paragraph

Standard Guide for Digital Imaging and Communication in Nondestructive Evaluation (DICONDE)

ASTM E1003-13(2018) 水压泄漏试验的标准实施规程

Standard Practice for Hydrostatic Leak Testing

ASTM E2934-14(2018) 涡流（EC）试验方法无损评价（DICONDE）中数字成像和通信的标准实施规程

Standard Practice for Digital Imaging and Communication in Nondestructive Evaluation (DICONDE) for Eddy Current (EC) Test Methods

ASTM E515-11(2018) 用气泡发射技术进行泄漏的标准实施规程

Standard Practice for Leaks Using Bubble Emission Techniques

ASTM E1002-11(2018) 超声波泄漏的标准实施规程

Standard Practice for Leaks Using Ultrasonics

ASTM E747-18 用于放射学的电线图像质量指标（IQI）的设计 制造和材料分组标准实践

1.1 This practice2 covers the design, material grouping classification, and manufacture of wire image quality indicators (IQI) used to indicate the quality of radiographic images. 1.2 This practice is applicable to X-ray and gamma-ray radiography. 1.3 This practice covers the use of wire penetrameters as the controlling image quality indicator for the material thickness range from 6.4 to 152 mm (0.25 to 6.0 in.). 1.4 The values stated in inch-pound units are to be regarded as standard. 1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.6 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Practice for Design, Manufacture and Material Grouping Classification of Wire Image Quality Indicators (IQI) Used for Radiology

ASTM E2663-14(2018) 数字成像与通信在非破坏性评估（DICONDE）中的超声波测试方法的标准实践

1.1 This practice facilitates the interoperability of ultrasonic imaging equipment by specifying image data transfer and archival storage methods in commonly accepted terms. This document is intended to be used in conjunction with Practice E2339 on Digital Imaging and Communication in Nondestructive Evaluation (DICONDE). Practice E2339 defines an industrial adaptation of the NEMA Standards Publication titled Digital Imaging and Communications in Medicine (DICOM, see http://medical.nema.org), an international standard for image data acquisition, review, transfer and archival storage. The goal of Practice E2339, commonly referred to as DICONDE, is to provide a standard that facilitates the display and analysis of NDE test results on any system conforming to the DICONDE standard. Toward that end, Practice E2339 provides a data dictionary and set of information modules that are applicable to all NDE modalities. This practice supplements Practice E2339 by providing information object definitions, information modules and data dictionary that are specific to ultrasonic test methods. 1.2 This practice has been developed to overcome the issues that arise when analyzing or archiving data from ultrasonic test equipment using proprietary data transfer and storage methods. As digital technologies evolve, data must remain decipherable through the use of open, industry-wide methods for data transfer and archival storage. This practice defines a method where all the ultrasonic technique parameters and test results are communicated and stored in a standard format regardless of changes in digital technology. 1.3 This practice does not specify: 1.3.1 A testing or validation procedure to assess an implementation’s conformance to the standard. 1.3.2 The implementation details of any features of the standard on a device claiming conformance. 1.3.3 The overall set of features and functions to be expected from a system implemented by integrating a group of devices each claiming DICONDE conformance. 1.4 Although this practice contains no values that require units, it does describe methods to store and communicate data that do require units to be properly interpreted. The SI units required by this practice are to be regarded as standard. No other units of measurement are included in this standard. 1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.6 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Practice for Digital Imaging and Communication in Nondestructive Evaluation (DICONDE) for Ultrasonic Test Methods

ASTM D6850-18 水中筛选方法QC的标准指南

1.1 This guide covers general considerations for the quality control (QC) practices for use with screening methods for organic and inorganic constituents in water. Methods are provided by various standard setting bodies, governmental agencies, as well as many domestic and international manufacturers. 1.2 This guide provides general QC procedures that are applicable to a broad range of screening methodologies. These procedures help to ensure the quality of data that is generated. Additional, method-specific or project specific requirements may be necessary. This guide also includes general considerations regarding proper utilization of screening methods. 1.3 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. 1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.5 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Guide for QC of Screening Methods in Water

BS EN ISO 20486:2018 无损检验.泄漏试验.气体基准泄漏的校准

Non-destructive testing. Leak testing. Calibration of reference leaks for gases

ASTM E1742/E1742M-18 射线检查的标准操作规程

1.1 This practice2 establishes the minimum requirements for radiographic examination for metallic and nonmetallic materials. 1.2 Applicability—The criteria for the radiographic examination in this practice are applicable to all types of metallic and nonmetallic materials. The requirements expressed in this practice are intended to control the quality of the radiographic images and are not intended to establish acceptance criteria for parts and materials. 1.3 Basis of Application—There are areas in this practice that may require agreement between the cognizant engineering organization and the supplier, or specific direction from the cognizant engineering organization. These items should be addressed in the purchase order or the contract. 1.3.1 DoD contracts. 1.3.2 Personnel qualification, 5.1.1. 1.3.3 Agency qualification, 5.1.2. 1.3.4 Digitizing techniques, 5.4.5. 1.3.5 Alternate image quality indicator (IQI) types, 5.5.3. 1.3.6 Examination sequence, 6.6. 1.3.7 Non-film techniques, 6.7. 1.3.8 Radiographic quality levels, 6.9. 1.3.9 Optical density, 6.10. 1.3.10 IQI qualification exposure, 6.13.3. 1.3.11 Non-requirement for IQI, 6.18. 1.3.12 Examination coverage for welds, A2.2.2. 1.3.13 Electron beam welds, A2.3. 1.3.14 Geometric unsharpness, 6.23. 1.3.15 Responsibility for examination, 6.27.1. 1.3.16 Examination report, 6.27.2. 1.3.17 Retention of radiographs, 6.27.8. 1.3.18 Storage of radiographs, 6.27.9. 1.3.19 Reproduction of radiographs, 6.27.10 and 6.27.10.1. 1.3.20 Acceptable parts, 6.28.1. 1.4 Units—The values stated in either SI units or inchpound units are to be regarded separately as standard. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in nonconformance with the standard. 1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.6 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Practice for Radiographic Examination

DIN 50989-1:2018 椭偏仪.第1部分:原理;德文和英文文本

This standard deals with the ellipsometry, a method for determining optical and dielectric constants in the UV-VIS-NIR spectral range as well as layer thicknesses, in the range of at-line production control, quality assurance and material development.

Ellipsometry - Part 1: Principles; Text in German and English