21.060 紧固件 标准查询与下载

AECMA PREN 3892-2001 航空航天系列TI-W64001钛合金填充金属丝焊接 P 2版

This standard specifies the requirements relating to filler metal for welding, cold drawn and annealed, titanium alloy TI-W64001 for aerospace application.

Aerospace Series Titanium Alloy TI-W64001 Filler Metal for Welding Edition P 2; Supersedes Edition P 1: January 1995; [Replaced By: CEN EN 3892]

AECMA PREN 3952-2001 航空航天系列.银基合金 AG-B10001 硬钎焊用填充金属丝

This standard specifies the required characteristics for lamp, code 337, used on-board aircraft. It shall be used together with EN 2756.

Aerospace Series Silver Base Alloy AG-B10001 Filler Metal for Brazing Wire Edition P 2; Supersedes Edition P 1: January 1994; Replaced by EN 3952

AECMA PREN 3953-2001 航空航天系列.银基合金 AG-B12401 硬钎焊用填充金属丝

This standard specifies the required characteristics for lamp, code 5678, used on-board aircraft. It shall be used together with EN 2756.

Aerospace Series Silver Base Alloy AG-B12401 Filler Metal for Brazing Wire Edition P 2; Supersedes Edition P 1: January 1994

AECMA PREN 3962-2001 航空航天系列 钴基合金 AU-B40001　硬钎焊用填充金属丝 CU-BU9001铜　硬钎焊用填充金属轧制箔

This standard specifies the requirements relating to gold base braze filler metal AU-B4001 in wire form for aerospace applications.

Aerospace Series Gold Base Alloy AU-B40001 Filler Metal for Brazing Wire Edition P 2

LST EN ISO 8740:2001 槽销 全长平行槽，带倒角（ISO 8740:1997）

Grooved pins - Full-length parallel grooved, with chamfer (ISO 8740:1997)

LST EN ISO 8741:2001 槽销 半长倒锥形槽（ISO 8741:1997）

Grooved pins - Half-length reverse taper grooved (ISO 8741:1997)

LST EN ISO 8734:2001 平行销，或硬化钢或马氏体不锈钢（定位销）（ISO 8734:1997）

Parallel pins, or hardened steel or martensitic stainless steel (Dowel pins) (ISO 8734:1997)

LST EN ISO 8733:2001 未硬化钢或奥氏体不锈钢制内螺纹平行销（ISO 8733:1997）

Parallel pins with internal thread, of unhardened steel or austenitic stainless steel (ISO 8733:1997)

LST EN ISO 8742:2001 槽销 三分之一长度的中心槽（ISO 8742:1997）

Grooved pins - One-third-length centre grooved (ISO 8742:1997)

LST EN ISO 8744:2001 槽销 全长锥槽（ISO 8744:1997）

Grooved pins - Full-length taper grooved (ISO 8744:1997)

LST EN ISO 8743:2001 槽销 半长中心槽（ISO 8743:1997）

Grooved pins - Half-length centre grooved (ISO 8743:1997)

LST EN ISO 8739:2001 槽销 全长平行槽，带导向器（ISO 8739:1997）

Grooved pins - Full-length parallel grooved, with pilot (ISO 8739:1997)

LST EN ISO 8735:2001 带内螺纹的平行销，硬化钢或马氏体不锈钢（ISO 8735:1997）

Parallel pins with internal thread, of hardened steel or martensitic stainless steel (ISO 8735:1997)

SNI 05-6024-1999 老虎钳

Machine vices

AIA/NAS NA 0043-1997 Rev. 2公制阳螺纹钮扣鉴定

STILUS SUALL BE DESIGNED TO CONTACT SCRSW HEAD AREA INDICATED.FOR USE WITH NAS 518 FLUSHKESS GAGE.

Identification of Male Threaded Fasteners Metric Rev. 2

AECMA PREN 4064-1996 航空航天系列钎焊填缝金属带厚度0,075mm小于或等于a小于或等于1,5mm P 2版

This standard is part of the series of EN metallic material standards for aerospace applications. The general organization of this series is described in EN 4258.

Aerospace Series Tape in Filler Metal for Brazing Thickness 0,075 mm Less Than or Equal to a Less Than or Equal to 1,5 mm Dimensions Edition P2

AECMA PREN 4066-1996 航空航天系列硼化钎焊填缝金属带厚度25μm小于或等于a小于或等于100μm P 2版

This standard specifies the dimensions and tolerances of borided foil, in filler metal for brazing, thickness 25 μm≤a≤100μm,for aerospace applications.

Aerospace Series Borided Foil in Filler Metal for Brazing Thickness 25 Micrometers Less Than or Equal to a Less Than or Equal to 100 Micrometer Dimensions Edition P2

AECMA PREN 4063-1996 航空航天系列钎焊填缝金属丝0,6mm小于或等于直径D小于或等于4mm P 2 版

This standard is part of the series of EN metallic material standards for aerospace applications. The general organization of this series in described in EN 4258.

Aerospace Series Wire in Filler Metal for Brazing Diameter 0,6 mm Less Than or Equal to D Less Than or Equal to 4 mm Dimensions Edition P2

AECMA PREN 3893-1995 航空航天系列.TI-W19001钛合金填充金属丝焊接 P.第1版

This standard specifies the requirements relating to filier metal for welding, cold drawn and annealed, titanium alloy TI-Wl9001 for aerospace application.

Aerospace Series Titanium Alloy TI-W19001 Filler Metal for Welding Edition P1

JB/T 7384.5-1994 紧固件.内六角量规

　　本标准规定了检测六角螺钉的内六角对边宽度、对角宽度及内六角孔深度的量规型式和尺寸。 　　本标准适用于ZB J13 002.1表2第13、14和15项。

Fasteners Hexagon socket gauge