21.060.01 紧固件综合 标准查询与下载

GSO ISO 16426:2008 紧固工具 质量保证体系

This International Standard specifies requirements for a fastener quality assurance system to be met by the fastener manufacturers and distributors. These requirements are intended to reduce or prevent the production of nonconforming fasteners with the objective of approaching zero defects for the characteristics specified. This International Standard outlines the requirements from receipt of raw material through the manufacturing process to delivery at the distributor or the user, who is the installer

Fasteners - Quality assurance system

NF E25-801-7:2008 预加负荷用高强度结构螺栓连接组件.第7部分:HR系统.沉头钉螺栓和螺母组件

High-strength structural bolting assemblies for preloading - Part 7 : system HR - Countersunk head bolt and nut assemblies.

ASTM A193/A193M-08a 高温或高压及其他特殊用途用合金钢和不锈钢螺栓材料的标准规范

Standard Specification for Alloy-Steel and Stainless Steel Bolting Materials for High Temperature or High Pressure Service and Other Special Purpose Applications

KS B ISO 16047:2008 紧固件.扭矩/夹持力试验

이 표준은 나사가 있는 파스너와 관련 부품에 대한 토크/조임 시험을 실시하는 조건에 대하여

Fasteners－Torque/clamp force testing

KS B ISO 16047-2008(2023) 紧固件－扭矩/夹紧力测试

Fasteners－Torque/clamp force testing

KS B ISO 16047-2008(2018) 紧固件 - 扭矩/夹紧力试验

Fasteners－Torque/clamp force testing

LST EN 14399-8-2008 预加载高强度结构螺栓组件 第8部分：HV 系统 六角配合螺栓和螺母组件

High-strength structural bolting assemblies for preloading - Part 8: System HV - Hexagon fit bolt and nut assemblies

LST EN 14399-7-2008 预加载高强度结构螺栓组件 第7部分：系统 HR 沉头螺栓和螺母组件

High-strength structural bolting assemblies for preloading - Part 7: System HR - Countersunk head bolt and nut assemblies

GJB 715.26A-2008 紧固件试验方法双剪

本标准规定了测定紧固件双剪强度的试验方法。 本标准适用于所有类型的紧固件。

Fastener test methods.Double shear test

GJB 715.23A-2008 紧固件试验方法拉伸强度

本标准规定了紧固件再室温进行抗拉强度的试验方法，但不包括紧固件与任何板件组装后的强度试验。 本标准适用于所有的紧固件。

Fastener test methods tensile strength

DIN EN 14399-8:2008 预荷载高强度结构螺栓 第8部分 HV系统 六角螺栓和螺母组件

This document belongs to the suite of European Standards EN 14399 and is designed to be read in conjunction with EN 14399-1 for: -- general requirements; -- testing for conformity evaluation; -- evaluation of conformity; -- regulatory marking; for assemblies of high-strength structural fit bolts and nuts of system HV suitable for preloaded joints with, thread sizes M12 to M36 and bolt property class 10.9 and EN 14399-2 for suitability testing. This part gives requirements for: -- dimensions; -- associated washer(s) according to EN 14399-6; -- performance and suitability tests for assemblies with thread sizes M12 to M36 and bolt property class 10.9. Assemblies of hexagon fit bolts with shaft diameter (d + 1 mm) and nuts according to this part of this European Standard have been designed to allow preloading of at least 0,7]ub x As1) according to EN 1993-1-8 (Eurocode 3) and to obtain ductility predominantly by deformation of the engaged thread. For this purpose the components have the following characteristics: -- nut height approximately 0,8 d; -- hexagon fit bolt with short thread length.

High-strength structural bolting assemblies for preloading - Part 8: System HV - Hexagon fit bolt and nut assemblies; English version of DIN EN 14399-8:2008-03

DIN EN 14399-7:2008 预负载用高强度结构螺栓连接组件 第7部分 系统HR 沉头钉螺栓和螺母组件

This document belongs to the suite of European Standards EN 14399 and is designed to be read in conjunction with EN 14399-1 for: general requirements; testing for conformity evaluation; evaluation of conformity; -- regulatory marking; for assemblies of high-strength structural countersunk bolts and nuts of system HR suitable for preloaded joints with thread sizes M12 to M36 and bolt property classes 8.8 and 10.9 and EN 14399-2 for suitability testing. This document gives requirements for: -- dimensions; -- associated washer(s) according to EN 14399-5 or to EN 14399-6; -- performance and suitability tests; for assemblies with thread sizes M12 to M36 and bolt property classes 8.8 and 10.9. Countersunk bolt and nut assemblies to this document have been designed to allow preloading of at least 0,7jub x .,Is1) according to EN 1993-1-8 (Eurocode 3) and to obtain ductility predominantly by elongation of the bolt. For this purpose the components have the following characteristics: -- nut height according to style 1 (see EN ISO 4032), -- thread length of the bolt according to ISO 888.

High-strength structural bolting assemblies for preloading - Part 7: System HR - Countersunk head bolt and nut assemblies; English version of DIN EN 14399-7:2008-03

NF E25-801-8:2008 预加负荷用高强度结构螺栓连接.第8部分:HV系统.六角螺栓和螺母组件

High-strength structural bolting for preloading - Part 8 : system HV - Hexagon fit bolt and nut assemblies.

DIN 974-1:2008 沉孔直径.制造尺寸.第1部分:六角凹头螺钉和凸圆头螺钉或大柱头螺钉

Diameters of counterbores - Manufacturing dimensions - Part 1: Hexagon socket head cap screws and screws with cheese head or pan head

DIN 11204:2008 紧固件.检验文件.信息和描述表

This standard applies to fasteners in accordance with DIN ISO 8992 and DIN EN ISO 14589. This standard specifies minimum requirements regarding information groups and sections (i.e. code numbers, designations and definitions) as in DIN EN 10168 to be given in inspection documents as specified in DIN EN 10204, issued for fasteners. The specifications of this standard may also be used for test certificates not issued by the manufacturer and in O cases where the issue of inspection documents in accordance with DIN EN 10204 has been agreed without specifying details as to their content. NOTE 1 An inspection document need not be issued if the manufacturer (code A04) is able to make available on request the information as detailed in the present standard on the basis of the documents accompanying the consignment or a number identifying the product (batch identification code B07). NOTE 2 Since the values given in an inspection document do not represent guaranteed characteristics of the product concerned, an obligation still exists to submit all products to a receiving inspection.

Fasteners - Inspection documents - List of information and description

BS EN 14399-8:2008 预负载高强度结构螺栓组件 第8部分：HV系统 六角配合螺栓和螺母组件

High-strength structural bolting assemblies for preloading. System HV. Hexagon fit bolt and nut assemblies

BS EN 14399-7:2007 预荷载高强度结构螺栓组件.第7部分:HR系统.沉头螺栓和螺母组件

This document belongs to the suite of European Standards EN 14399 and is designed to be read in conjunction with EN 14399-1 for:  general requirements;  testing for conformity evaluation;  evaluation of conformity;  regulatory marking; for assemblies of high-strength structural countersunk bolts and nuts of system HR suitable for preloaded joints with thread sizes M12 to M36 and bolt property classes 8.8 and 10.9 and EN 14399-2 for suitability testing. This document gives requirements for:  dimensions;  associated washer(s) according to EN 14399-5 or to EN 14399-6;  performance and suitability tests; for assemblies with thread sizes M12 to M36 and bolt property classes 8.8 and 10.9. Countersunk bolt and nut assemblies to this document have been designed to allow preloading of at least 0,7 f × As according to EN 1993-1-8 (Eurocode 3) and to obtain ductility predominantly by elongation of the bolt. For this purpose the components have the following characteristics:  nut height according to style 1 (see EN ISO 4032),  thread length of the bolt according to ISO 888.

High-strength structural bolting assemblies for preloading. Part 7: System HR. Countersunk head bolt and nut assemblies

BS EN 14399-7:2008 预荷载高强度结构螺栓组件 第7部分：HR系统 沉头螺栓和螺母组件

High-strength structural bolting assemblies for preloading. System HR. Countersunk head bolt and nut assemblies

BS EN 14399-8:2007 预负载高强度结构螺栓组件.第8部分:HV系统.六角配合螺栓和螺母组件

This document belongs to the suite of European Standards EN 14399 and is designed to be read in conjunction with EN 14399-1 for:  general requirements;  testing for conformity evaluation;  evaluation of conformity;  regulatory marking; for assemblies of high-strength structural fit bolts and nuts of system HV suitable for preloaded joints with, thread sizes M12 to M36 and bolt property class 10.9 and EN 14399-2 for suitability testing. This part gives requirements for:  dimensions;  associated washer(s) according to EN 14399-6;  performance and suitability tests for assemblies with thread sizes M12 to M36 and bolt property class 10.9. Assemblies of hexagon fit bolts with shaft diameter (d + 1 mm) and nuts according to this part of this European Standard have been designed to allow preloading of at least 0,7 f × As according to EN 1993-1-8 (Eurocode 3) and to obtain ductility predominantly by deformation of the engaged thread. For this purpose the components have the following characteristics:  nut height approximately 0,8 d;  hexagon fit bolt with short thread length.

High-strength structural bolting assemblies for preloading. Part 8: System HV. Hexagon fit bolt and nut assemblies

ASTM F2280-08e1 x201C;拧断 x201D; 型拉力控制结构钢螺栓/螺母/垫片组件,钢,热处理,150 ksi 最小抗张强度的标准规范

1.1 This specification covers two types of heat treated, steel, tension control bolt-nut-washer assemblies, also referred to as “sets,” having a tensile strength of 150 to 173 ksi. These assemblies are capable of developing a minimum predetermined tension when installed by applying torque to the nut, while at the same time applying a counter torque to separate the spline end from the body of the bolt using an appropriate spline drive installation tool. 1.2 An assembly consists of a tension control bolt with spline end (covered by this specification) and a suitable nut and washer covered by reference to applicable ASTM specifications. 1.3 The fastener assemblies are intended for use in structural connections. These connections, installation procedures, and the use of alternate design structural bolts are covered under the requirements of the “Specification for Structural Joints Using ASTM or A490 Bolts”, approved by the Research Council on Structural Connections. 1.4 The assemblies are available with either round (button or dome) heads, heavy hex structural heads, or alternate design heads described in Section 11 , in sizes ½ to 1 1/8 in. inclusive, in two types specified in Section 4. 1.5 Tension control bolts manufactured and marked in accordance with the requirements of Specification A490, and conforming to the dimensional and other requirements of this specification, will be considered an acceptable alternate under this specification for two years following initial publication. 1.6 The following precautionary statement pertains only to the test method portions, Sections 15 and 16, of this Specification: This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Specification for &x201C;Twist Off&x201D; Type Tension Control Structural Bolt/Nut/Washer Assemblies, Steel, Heat Treated, 150 ksi Minimum Tensile Strength