21.060.01 紧固件综合 标准查询与下载

AIA/NAS NAS 1972-1980-2006 FSC 5306.Rev. 6,108KSI Fsu,楔榫开槽十字形偏差100度埋头保险螺栓

uiameter of unthreided portlon Of shank shall not be lest chan min pitch dia nor

BOLT, SHEAR, 100?FLUSH HEAD, OFFSET CRUCIFORM AND DOVETAIL SLOT, 108 KSI Fsu Rev. 6

AIA/NAS NAS 5311-2006 FSC 5305六裂片凹槽NAS1800全螺纹圆平头螺钉

USE OF OR RELUNCE UPON THIS DOCUMENT OR ANY NATIONAL AEROSPACE STANDARD IS ENTIRELY VOLUNTARY AIA DOES NOT QUALIFY SUPPLIERS OR :ERTiFY CONFORMANCE OF ITEMS PROCURED UNDER NATIONAL AEROSPACE STANDARDS. UTABILITY OF ITEMS FOR

SCREW, FLAT FILLISTER HEAD, FULL THREAD, NAS1800 SIX LOBE RECESS FSC 5305

AIA/NAS NAS 5320-2006 FSC 5305.95KSI FSU六裂片凹槽NAS1800紧公差100度埋头安全螺钉

Part to be used with NAS191 Terminal Board Assembly- Molded-In Screw,Electrical.

SCREW, SHEAR, 100 DEG FLUSH REDUCED HEAD, CLOSE TOLERANCE, NAS1800 SIX LOBE RECESS, 95 KSI FSU FSC 5305

AIA/NAS NAS 5321-2006 FSC 5305.95KSI FSU六裂片凹槽NAS1800紧公差100度埋头安全螺钉

DIMENSIONS IN INCHES.

BOLT, SHEAR, 100 DEGREE FLUSH HEAD, CLOSE TOLERANCE, NAS1800 SIX LOBE RECESS, 108 KSI FSU FSC 5305

AIA/NAS NAS 5315-2006 FSC 5305.95KSI FSU六裂片凹槽NAS1800短螺纹紧公差100度埋头安全螺钉

NASM122156THRU122195, IlInsert, Cres Helical Coil Coarse Thread, 2 DIA Nominal Length", was adopted on 30-JUN-98 for use by the Department of Defense (DoD). Proposed changes by DoD activities must be submitted to the DoD Adopting Activity: Commander, Defense Industrial Supply Center, 700 Robbins Avenue, Philadelphia, PA 19111-5096

SCREW, SHEAR, 100 DEG FLUSH HEAD, CLOSE TOLERANCE, SHORT THREAD, NAS1800 SIX LOBE RECESS, 95 KSI FSU FSC 5305

AIA/NAS NAS 5316-2006 FSC 5305.95KSI FSU六裂片凹槽NAS1800短螺纹紧公差100度埋头安全螺钉

This non4overnment docwnent rn adopted on 30 January 1984 and ia approved for use by DoDe The indicated indwtry group has furnished the clearance required %y existing re@ations, Copies of the domment are stocked by the DoD Single Stock Point, Naval. ptrhl icatiorm and Forms Canter, PhSl.adelphia, PA 191 20, for issue to DoD activities only. Contractom and industry groups mat obtain copies directly from National 8tc?ndards AssociRtion, Ince y 5161 River Road, Rethesda, MD m16.

SCREW, SHEAR, 100 DEG FLUSH HEAD, CLOSE TOLERANCE, SELF-LOCKING, NAS1800 SIX LOBE RECESS, 95 KSI FSU FSC 5305

AIA/NAS NAS 5314-2006 FSC 5305.95KSI FSU六裂片凹槽NAS1800短螺纹紧公差平头安全螺钉

Approved for public release; distribution

SCREW, SHEAR, PAN HEAD, CLOSE TOLERANCE, SHORT THREAD, NAS1800 SIX LOBE RECESS, 95 KSI FSU FSC 5305

AIA/NAS NAS 5310-2006 FSC 5305.95KSI FSU六裂片凹槽NAS1800紧公差130度埋头安全螺钉

Approved for public release; distribution is unlimited.

SCREW, SHEAR, 130 DEG FLUSH HEAD, CLOSE TOLERANCE, NAS1800 SIX LOBE RECESS, 95 KSI FSU FSC 5305

AIA/NAS NAS 5313-2006 FSC 5305.95KSI FSU六裂片凹槽NAS1800短螺纹紧公差圆平头安全螺钉

NOMINAL LENGTH E a u u BASIC THICKNESS OF PUTE FOR INSERT ASSEMBLY. 2. ASSEMBLED LENGTH OF INSERT TO BE AS SPECIFEO ON MS33537. *3. NUMBER OF FREE COILS TO BE COUNTED ANO ASSEMBLED LENGTH OF INSERT TO BE MEASUREO 9U FROM TANG. 4. MATERUL: STEEL, CORROSION RESISTANT. AMs 7245 (MATERIAL ANO MFG.). 5. SURFACE TEXTURE: ANSI 846.1-1952. 6. INSERT, WHEN ASSEMBLED IN TAPPE0 HOLE AS SPECIFIED IN MS33537. SHKL PRODUCE A FINISHED THD MEETING ALL REOUIREMENTS OF MIL-S-7742 AND SHALL ACCEPT D(TERNAL MIL-S-8879 THREADS.

SCREW, SHEAR, FLAT FILLISTER HEAD, CLOSE TOLERANCE, SHORT THREAD, NAS1800 SIX LOBE RECESS, 95 KSI FSU FSC 5305

AIA/NAS NAS 5317-2006 FSC 5305六裂片凹槽NAS1800自锁全螺纹平头螺钉

Approved for public release; distribution is unlimited.

SCREW, PAN HEAD, FULL THREAD, SELF-LOCKING, NAS1800 SIX LOBE RECESS FSC 5305

AIA/NAS NAS 5312-2006 FSC 5305自锁及非自锁六裂片凹槽NAS1800全螺纹100度埋头螺钉

BUSSING INDICATOR LINES AND INDEXING DOTS SMLL BE OF CONTRASTING COLOR.

SCREW, 100 DEG FLUSH HEAD, FULL THREAD, NAS1800 SIX LOBE RECESS, SELF-LOCKING AND NON-LOCKING FSC 5305

AIA/NAS NAS 5318-2006 FSC 5305.95KSI FSU六裂片凹槽NAS1800自锁及非自锁长螺纹紧公差平板头安全螺栓

Use:This fixture is used in stress embrittlement, accelerated environmental reusability, and wrench torque tests of selflocking nuts.

BOLT, SHEAR, FLAT PAN HEAD, CLOSE TOLERANCE, LONG THREAD, NON-LOCKING AND SELF-LOCKING, NAS1800 SIX LOBE RECESS, 95 KSI FSU FSC 5305

AIA/NAS NAS 5319-2006 FSC 5305.95KSI FSU六裂片凹槽NAS1800紧公差100度埋头安全螺钉

SCREW, SHEAR, 100 DEG FLUSH HEAD, CLOSE TOLERANCE, NAS1800 SIX LOBE RECESS, 95 KSI FSU FSC 5305

SCREW, SHEAR, 100 DEG FLUSH HEAD, CLOSE TOLERANCE, NAS1800 SIX LOBE RECESS, 95 KSI FSU FSC 5305

DVS-EFB 3440-1-2006 功能元素 概述

Overview of functional elements

DVS-EFB 3440-2-2006 功能元件 冲压、铆接、压入元件（冲孔、铆接和冲压成型元件）

Functional components Stamped, riveted, pressed-in components (punched, riveted and stamped-formed components)

DLA A-A-55615 VALID NOTICE 2-2006 扩展护罩(自动穿线壁锚的木螺钉及木螺栓)

A-A-55615, dated 21 August 2001, has been reviewed and determined to be valid for use in acquisition.

SHIELD, EXPANSION (WOOD SCREW AND LAG BOLT SELF-THREADING ANCHORS)

ANSI A10.3-2006 火药驱动的紧固系统的安全要求

This standard provides safety requirements for a powder-actuated fastening system (tool or machine) that propels a stud, pin, fastener, or other object for the purpose of affixing it, by penetration, to hard structural material. (such as floors, walls, c

Safety Requirements for Powder-Actuated Fastening Systems

SAE J2295-2006 六角头螺栓和六角螺母准帽螺钉用紧固件部件标准

This SAE Part Standard covers selected screws, hex bolts, and nuts manufactured in accordance with American Society for Testing and Materials (ASTM) fastener standards. This document covers materials often used in ship systems and equipment but its use may be applied wherever fasteners of the covered materials are used. This document permits the fasteners covered to be identified and ordered by a part or identifying number (PIN) as defined in this document. The purpose of this document is to assist the designer and other personnel in providing requirements and part identifying numbers for the most commonly used fasteners for ship systems and equipment. A part identification number (PIN) is normally required for all military applications and provides a useful means of communicating fastener requirements to suppliers and manufacturers in a very succinct manner.

Fasteners Part Standard Cap Screws, Hex Bolts, and Hex Nuts (inch Dimensioned)

DLA AN363 REV 4 VALID NOTICE 1-2006 F型550度自锁螺母

AN363 REV 4, dated 17 June 1964, remains inactive for new design; however, the document is valid for use.

NUT, SELF-LOCKING, 550 DEG. F

JIS B 1047:2006 耐腐蚀不锈钢紧固件的钝化处理

この規格は，耐食ステンレス鋼製締結用部品の不動態化に一般的に用いられる方法について規定する。なお，活性態一不動態一過不動態金属の代表的なアノード溶解挙動を，附属書に示す。備考 この規格の対応国際規格を，次に示す。なお，対応の程度を表す記号は，ISO/IEC Guide 21に基づき， IDT(一致している)，MOD（修正している），NEQ(同等でない)とする。

Passivation of corrosion-resistant stainless-steel fasteners