21.060.20 螺母 标准查询与下载

SAE J1053-2013 单齿节螺纹设计公制系列钢模压螺母

Included herein are general, dimensional, and performance specifications for those types, styles, and sizes of stamped nuts of one pitch thread design recognized as SAE Standard. These nuts are intended for general use where the engagement of a single thread on the mating screw or unthreaded stud is considered adequate for the application. For the metric equivalent of this document, see SAE J1053M.

Steel Stamped Nuts of One Pitch Thread Design Inch Series

GSO ISO 6157-2:2013 紧固工具 分离表面 第2部分：螺母

This part of ISO 6157 establishes limits for various types of surface discontinuities on nuts. lt applies to nuts with - nominal thread diameters from 5 mm up to and including 39 mm; - product grades A and B; - all property classes according to ISO 898-2 and ISO 898-6, unless otherwise specified in product Standards or agreed between supplier and purchaser. 2

Fasteners -- Surface discontinuities -- Part 2: Nuts

GSO ISO 2320:2013 有效扭矩型钢螺母机械和性能特性

This International Standard specifies the mechanical and performance properties for prevailing torque type steel nuts when tested at an ambient temperature range of +10 °C to +35 °C. It includes a single test to determine the prevailing torque properties (performance properties) and/or the torque/clamp force properties. This International Standard applies to prevailing torque all metal type nuts and prevailing torque non-metallic insert type nuts: a) with triangular ISO thread according to ISO 68-1; b) with diameter/pitch combination according to ISO 261 and ISO 262; c) with coarse pitch thread M3 to M39 and mechanical properties according to ISO 898-2; d) with fine pitch thread M8×1 to M39×3 and mechanical properties according to ISO 898-6; e) within the temperature range of −50 °C to +150 °C for prevailing torque all metal type nuts; NOTE 1 See Clause 7, paragraph 3. f) within the temperature range of −50 °C to +120 °C for prevailing torque non-metallic insert type nuts.

Prevailing torque type steel nuts -- Mechanical and performance properties

DIN EN ISO 7040:2013 有效力矩式正六角螺母(带非金属嵌件). 性能级别5, 8和10(ISO 7040-2012); 德文版本EN ISO 7040-2012

Prevailing torque type hexagon regular nuts (with non-metallic insert) - Property classes 5, 8 and 10 (ISO 7040:2012); German version EN ISO 7040:2012

ISO/CD 10512 紧固件 有效扭矩六角螺母 普通螺母（带非金属嵌件），带细牙螺纹

Fasteners — Prevailing torque hexagon nuts — Regular nuts (with non-metallic insert), with fine pitch thread

DIN EN ISO 4035:2013 倒角六角薄螺母(0型).产品等级A和B级.德文版本EN ISO 4035-2012

Hexagon thin nuts chamfered (style 0) - Product grades A and B (ISO 4035:2012); German version EN ISO 4035:2012

ISO/CD 7719 紧固件 有效扭矩六角螺母 普通螺母（全金属）

Fasteners — Prevailing torque hexagon nuts — Regular nuts (all metal)

ISO/CD 7720 紧固件 有效扭矩六角螺母 带槽高螺母（全金属）

Fasteners — Prevailing torque hexagon nuts — High nuts (all metal) with slot(s)

DIN EN ISO 8673:2013 带公制细牙螺纹的正六角螺母(1型). A级和B级产品(ISO 8673-2012); 德文版本EN ISO 8673-2012

Hexagon regular nuts (style 1) with metric fine pitch thread - Product grades A and B (ISO 8673:2012); German version EN ISO 8673:2012

ISO 4034:2012/Cor 1:2013 六角形规则螺母(1款).产品等级C.技术勘误表1

Hexagon regular nuts (style 1) - Product grade C; Technical Corrigendum 1

ISO 7719:2012/Cor 1:2013 牵出扭矩型全金属六角形规则螺母.性能等级5,8和10.技术勘误表1

Prevailing torque type all-metal hexagon regular nuts - Property classes 5, 8 and 10; Technical Corrigendum 1

ISO/FDIS 8674 紧固件 — 六角高螺母（类型 2），带细牙螺纹

Fasteners — Hexagon high nuts (style 2), with fine pitch thread

ISO/FDIS 8673 紧固件 — 六角普通螺母（类型 1），带细牙螺纹

Fasteners — Hexagon regular nuts (style 1), with fine pitch thread

ISO/FDIS 8675 紧固件 — 六角薄螺母（0 型），带细牙螺纹

Fasteners — Hexagon thin nuts (style 0), with fine pitch thread

ISO/CD 10511 紧固件 有效扭矩六角螺母 薄螺母（带非金属嵌件）

Fasteners — Prevailing torque hexagon nuts — Thin nuts (with non-metallic insert)

ISO/CD 10513 紧固件 有效扭矩六角螺母 高螺母（全金属），带细牙螺纹

Fasteners — Prevailing torque hexagon nuts — High nuts (all metal), with fine pitch thread

DIN EN ISO 4032:2013 六角法兰面螺母 (1型). 产品等级A和B (ISO 4032-2012); 德文版本EN ISO 4032-2012

Hexagon regular nuts (style 1) - Product grades A and B (ISO 4032:2012); German version EN ISO 4032:2012

DIN EN ISO 4036:2013 六角非倒角薄型螺母 (0型). 产品等级B (ISO 4036-2012); 德文版本EN ISO 4036-2012

Hexagon thin nuts unchamfered (style 0) - Product grade B (ISO 4036:2012); German version EN ISO 4036:2012

DIN EN ISO 7719:2013 有效力矩型全金属六角螺母.性能等级5、8级和10级(ISO 7719-2012).德文版本EN ISO 7719-2012

Prevailing torque type all-metal hexagon regular nuts - Property classes 5, 8 and 10 (ISO 7719:2012); German version EN ISO 7719:2012

DIN EN ISO 8674:2013 带公制细牙螺纹的六角高螺母(2型). A级和B级产品(ISO 8674-2012); 德文版本EN ISO 8674-2012

Hexagon high nuts (style 2) with metric fine pitch thread - Product grades A and B (ISO 8674:2012); German version EN ISO 8674:2012