21.060.40 铆钉 标准查询与下载

DS/EN ISO 15975:2003 带断拉心轴和突出头的封闭端盲铆钉 AI/AIA

This standard specifies dimensional and mechanical characteristics and application data for closed end blind rivets with break pull mandrel and protruding head, with a commercially pure aluminium body (Al) and an aluminium alloy mandrel (AlA) and with nominal diameters, d, from 3,2 mm up to and including 4,8 mm.

Closed end blind rivets with break pull mandrel and protruding head - AI/AIA

DS/EN ISO 15978:2003 带断拉心轴和沉头的开口盲铆钉 AIA/St

This standard specifies dimensional and mechanical characteristics and application data for open end blind rivets with break pull mandrel and countersunk head, with an aluminium alloy (AIA) body and steel a steel (St) mandrel with nominal diameters, d, from 2,4 mm up to and including 5 mm.

Open end blind rivets with break pull mandrel and countersunk head - AIA/St

DS/EN ISO 15976:2003 带断拉心轴和突出头的封闭端盲铆钉 St/St

This standard specifies dimensional and mechanical characteristics and application data for closed end blind rivets with break pull mandrel and protruding head, with a steel body (St) and an steel mandrel (St) and with nominal diameters, d, from 3,2 mm up to and including 6,4 mm.

Closed end blind rivets with break pull mandrel and protruding head - St/St

DS/EN ISO 15979:2003 带断拉心轴和突出头的开口盲铆钉 St/St

This standard specifies dimensional and mechanical characteristics and application data for open end blind rivets with break pull mandrel and protruding head, with a steel body (St) and a steel mandrel (St) and with nominal diameters, d, from 2,4 mm up to and including 6,4 mm.

Open end blind rivets with break pull mandrel and protruding head - St/St

DS/EN ISO 15982:2003 带断拉心轴和沉头的开口盲铆钉 AIA/AIA

This standard specifies dimensional and mechanical characteristics and application data for open end blind rivets with break pull mandrel and countersunk head, with an aluminium alloy body (AIA) and an aluminium alloy mandrel (AIA) and with nominal diameters, d, from 2,4 mm up to and including 6,4 mm.

Open end blind rivets with break pull mandrel and countersunk head - AIA/AIA

DS/EN ISO 16585:2003 带拉芯和凸头的封闭式盲铆钉 A2/SSt

This standard specifies dimensional and mechanical characteristics and application data for closed end blind rivets with break pull mandrel and protruding head, with an austenitic stainlees-steel body (A2) and a stainless-steel mandrel (SSt) and with nominal diameters, d, from 3,2 mm up to and including 6,4 mm.

Closed end blind rivets with pull mandrel and protruding head - A2/SSt

DS/EN ISO 16584:2003 带断拉心轴和突出头的开口盲铆钉 NiCu/St 或 NiCu/SSt

This standard specifies dimensional and mechanical characteristics and application data for open end blind rivets with break pull mandrel, protruding head, with a nickel copper body (NiCu) and either a steel (St) or stainless steel (SSt) mandrel and with nominal diameters, d, from 3,2 mm up to and including 6,4 mm.

Open end blind rivets with break pull mandrel and protruding head - NiCu/St or NiCu/SSt

DS/EN ISO 16583:2003 带断拉心轴和沉头的开口盲铆钉 Cu/St 或 Cu/Br 或 Cu/SSt

This standard specifies dimensional and mechanical characteristics and application data for open end blind rivets with break pull mandrel and countersunk head, with a copper body (Cu) and either a steel (St) or a bronze (Br) or a stainless steel (SSt) mandrel and with nominal diameters from 3 mm up to and including 4,8 mm.

Open end blind rivets with break pull mandrel and countersunk head - Cu/St or Cu/Br or Cu/SSt

DS/EN ISO 16582:2003 带断拉心轴和突出头的开口盲铆钉 Cu/St 或 Cu/Br 或 Cu/SSt

This standard specifies dimensional and mechanical characteristics and application data for open end blind rivets with break pull mandrel and protruding head, with a copper body (Cu) and either a steel (St) or a bronze (Br) or a stainless steel (SSt) mandrel and with nominal diameters, d, from 3 mm up to and including 4,8 mm.

Open end blind rivets with break pull mandrel and protruding head - Cu/St or Cu/Br or Cu/SSt

DS/EN ISO 15977:2003 带断拉心轴和突出头的开口盲铆钉 AIA/St

This standard specifies dimensional and mechanical characteristics and application data for open end blind rivets with break pull mandrel and protruding head, with an aluminium alloy body (AIA) and a steel mandrel (St) and with nominal diameters, d, from 2,4 mm up to and including 6,4 mm.

Open end blind rivets with break pull mandrel and protruding head - AIA/St

DS/EN ISO 15984:2003 带断拉心轴和沉头的开口盲铆钉 A2/A2

This standard specifies dimensional and mechanical characteristics and application data for open end blind rivets with break pull mandrel and countersunk head, with an austenitic stainless steel body (A2) and an austenitic stainless steel mandrel (A2) and with nominal diameters, d, from 3 mm up to and including 5 mm.

Open end blind rivets with break pull mandrel and countersunk head - A2/A2

DS/EN ISO 15983:2003 带断拉心轴和突出头的开口盲铆钉 A2/A2

This standard specifies dimensional and mechanical characteristics and application data for open end blind rivets with break pull mandrel and protruding head, with an austenitic stainless steel body (A2) and an austenitic stainless steel mandrel (A2) and with nominal diameters, d, from 3 mm up to and including 5 mm.

Open end blind rivets with break pull mandrel and protruding head - A2/A2

DS/EN ISO 15981:2003 带断拉心轴和突出头的开口盲铆钉 AIA/AIA

This standard specifies dimensional and mechanical characteristics and application data for open end blind rivets with break pull mandrel and protruding head, with an aluminium alloy body (AIA) and an aluminium alloy mandrel (AIA) and with nominal diameters, d, from 2,4 mm up to and including 6,4 mm.

Open end blind rivets with break pull mandrel and protruding head - AIA/AIA

DIN EN ISO 15984:2003 开口型沉头抽芯盲铆钉.A2/A2

The document specifies dimensional and mechanical characteristics and application data for open end blind rivets with break pull mandrel, countersunk head, made of A2/A2.

Open end blind rivets with break pull mandrel and countersunk head - A2/A2 (ISO 15984:2002); German version EN ISO 15984:2002

DIN EN ISO 15976:2003 封闭型盘头抽芯盲铆钉.St/St

The document specifies the characteristics of blind rivets with break pull mandrel and protruding head with the material combination steel/steel.

Closed end blind rivets with break pull mandrel and protruding head - St/St (ISO 15976:2002); German version EN ISO 15976:2002

DIN EN ISO 15979:2003 开口型盘头抽芯盲铆钉.St/St

The document specifies dimensional and mechanical characteristics and application data for open end blind rivets with break pull mandrel, protruding head made of St/St.#,,#

Open end blind rivets with break pull mandrel and protruding head - St/St (ISO 15979:2002); German version EN ISO 15979:2002

DIN EN ISO 15978:2003 开口型沉头抽芯盲铆钉.AIA/St

Open end blind rivets with break pull mandrel and countersunk head - AlA/St (ISO 15978:2002); German version EN ISO 15978:2002

DIN EN ISO 15981:2003 开口型盘头抽芯盲铆钉.AIA/AIA

The document specifies dimensional and mechanical characteristics and application data for open end blind rivets with break pull mandrel, protruding head, made of AlA/AlA.

Open end blind rivets with break pull mandrel and protruding head - AlA/AlA (ISO 15981:2002); German version EN ISO 15981:2002

DIN EN ISO 15982:2003 开口型沉头抽芯盲铆钉.AIA/AIA

The document specifies dimensional and mechanical characteristics and application data for open end blind rivets with break pull mandrel, countersunk head, made of AlA/AlA.

Open end blind rivets with break pull mandrel and countersunk head - AlA/AlA (ISO 15982:2002); German version EN ISO 15982:2002

DIN EN ISO 15983:2003 开口型盘头抽芯盲铆钉.A2/A2

The document specifies dimensional and mechanical characteristics and application data for open end blind rivets with break pull mandrel, protruding head, made of A2/A2.

Open end blind rivets with break pull mandrel and protruding head - A2/A2 (ISO 15983:2002); German version EN ISO 15983:2002