21.060.40 铆钉 标准查询与下载

DIN EN ISO 16582:2003 开口型盘头抽芯盲铆钉.Cu/St或Cu/Br或Cu/SSt

Open end blind rivets with break pull mandrel and protruding head - Cu/St or Cu/Br or Cu/SSt (ISO 16582:2002); German version EN ISO 16582:2002

DIN EN ISO 16583:2003 开口型沉头抽芯盲铆钉.Cu/St或Cu/Br或Cu/SSt

The document specifies dimensions of open end blind rivets with break pull mandrel and countersunk head and with material combinations Cu/St or Cu/Br or Cu/SSt.

Open end blind rivets with break pull mandrel and countersunk head - Cu/St or Cu/Br or Cu/SSt (ISO 16583:2002); German version EN ISO 16583:2002

DIN EN ISO 16584:2003 开口型盘头抽芯盲铆钉.NiCu/St或NiCu/SSt

The document specifies dimensions of open end blind rivets with break pull mandrel and protruding head and with material combinations Ni/Cu/St or NiCu/SSt.

Open end blind rivets with break pull mandrel and protruding head - NiCu/St or NiCi/SSt (ISO 16584:2002); German version EN ISO 16584:2002

DIN EN ISO 16585:2003 封闭型盘头抽芯盲铆钉.A2/SSt

The document specifies dimensions of closed end blind rivets with break pull mandrel and protruding head and with material combination A2/SSt.

Closed end blind rivets with break pull mandrel and protruding head - A2/SSt (ISO 16585:2002); German version EN ISO 16585:2002

DIN EN ISO 15975:2003 封闭型盘头抽芯盲铆钉.AI/AIA

Closed end blind rivets with break pull mandrel and protruding head - Al/AlA (ISO 15975:2002); German version EN ISO 15975:2002

DIN EN ISO 15980:2003 开口型沉头抽芯盲铆钉.St/St

Open end blind rivets with break pull mandrel and countersunk head - St/St (ISO 15980:2002); German version EN ISO 15980:2002

NF E25-722*NF EN ISO 16582:2003 带截断抽芯杆和凸头的敞开端盲铆钉.Cu/St或Cu/Br或Cu/SSt

Open end blind rivets with break pull mandrel and protruding head - Cu/St or Cu/Br or Cu/SSt.

NF E25-715*NF EN ISO 15978:2003 带截断抽芯杆和凸头的敞开端盲铆钉.AIA/St

Open end blind rivets with break pull mandrel and countersunk head - AIA/St.

ASTM A502-03(2015) 钢结构铆钉的标准规格

1.1 This specification covers three grades of steel rivets in diameters from 1/2 to 11/2 in. inclusive, for structural fabricating purposes. The grades are as follows: Grade Description 1 Carbon steel rivets for general purpose use 2 Carbon manganese steel rivets for use with high strength carbon and high strength low alloy structural steels 3 Weathering steel rivets 1.2 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard.

Standard Specification for Rivets, Steel, Structural

BS EN ISO 16583:2002 沉头抽心敞口端盲铆钉.Cu/St or Cu/Br or Cu/SSt

ISO 16583 specifies dimensional and mechanical characteristics and application data for open end blind rivets with break pull mandrel and countersunk head, with a copper body (Cu) and either a steel (St) or a bronze (Br) or a stainless steel (SSt) mandrel and with nominal diameters from 3 mm up to and including 4,8 mm.

Open end blind rivets with break pull mandrel and countersunk head - Cu/St or Cu/Br or Cu/SSt

BS EN ISO 16585:2002 封闭式盘头拉式心轴盲铆钉.A2/SSt

ISO 16585 specifies dimensional and mechanical characteristics and application data for closed end blind rivets with break pull mandrel and protruding head, with an austenitic stainless-steel body (A2) and a stainless-steel mandrel (SSt) and with nominal diameters from 3,2 mm up to and including 6,4 mm.

Closed end blind rivets with pull mandrel and protruding head - A2/SSt

BS EN ISO 16582:2002 凸头抽心敞口端盲铆钉.Cu/St or Cu/Br or Cu/SSt

ISO 16582 specifies dimensional and mechanical characteristics and application data for open end blind rivets with break pull mandrel and protruding head, with a copper body (Cu) and either a steel (St) or a bronze (Br) or a stainless steel (SSt) mandrel and with nominal diameters from 3 mm up to and including 4,8 mm.

Open end blind rivets with break pull mandrel and protruding head - Cu/St or Cu/Br or Cu/SSt

BS EN ISO 16584:2002 凸头抽心敞口端盲铆钉.NiCu/St or NiCu/SSt

ISO 16584 specifies dimensional and mechanical characteristics and application data for open end blind rivets with break pull mandrel, protruding head, with a nickel copper body (NiCu) and either a steel (St) or stainless steel (SSt) mandrel and with nominal diameters from 3,2 mm up to and including 6,4 mm.

Open end blind rivets with break pull mandrel and protruding head - NiCu/St or NiCu/SSt

BS EN ISO 15977:2002 凸头抽心敞口端盲铆钉.AIA/St

ISO 15977 specifies dimensional and mechanical characteristics and application data for open end blind rivets with break pull mandrel and protruding head, with an aluminium alloy body and a steel mandrel and with nominal diameters from 2,4 mm up to and including 6,4 mm.

Open end blind rivets with break pull mandrel and protruding head - AIA/St

BS EN ISO 15979:2002 凸头抽心敞口端盲铆钉.St/St

ISO 15979 specifies dimensional and mechanical characteristics and application data for open end blind rivets with break pull mandrel and protruding head, with a steel body and a steel mandrel and with nominal diameters from 2,4 mm up to and including 6,4 mm.

Open end blind rivets with break pull mandrel and protruding head - St/St

BS EN ISO 15978:2002 沉头抽心敞口端盲铆钉.AIA/St

ISO 15978 specifies dimensional and mechanical characteristics and application data for open end blind rivets with break pull mandrel and countersunk head, with an aluminium alloy body and a steel mandrel with nominal diameters from 2,4 mm up to and including 5 mm.

Open end blind rivets with break pull mandrel and countersunk head - AIA/St

BS EN ISO 15981:2002 凸头抽心敞口端盲铆钉.AIA/AIA

ISO 15981 specifies dimensional and mechanical characteristics and application data for open end blind rivets with break pull mandrel and protruding head, with an aluminium alloy body (AlA) and an aluminium alloy mandrel (AlA) and with nominal diameters from 2,4 mm up to and including 6,4 mm.

Open end blind rivets with break pull mandrel and protruding head - AIA/AIA

BS EN ISO 15980:2002 沉头抽心敞口端盲铆钉.St/St

ISO 15980 specifies dimensional and mechanical characteristics and application data for open end blind rivets with break pull mandrel and protruding head, with a steel body and a steel mandrel and with nominal diameters from 2,4 mm up to and including 6,4 mm.

Open end blind rivets with break pull mandrel and countersunk head - St/St

BS EN ISO 15983:2002 凸头抽心敞口端盲铆钉.A2/A2

ISO 15983 specifies dimensional and mechanical characteristics and application data for open end blind rivets with break pull mandrel and protruding head, with an austenitic stainless steel body (A2) and an austenitic stainless steel mandrel (A2) and with nominal diameters from 3 mm up to and including 5 mm.

Open end blind rivets with break pull mandrel and protruding head - A2/A2

BS EN ISO 15975:2002 盘头离心牵引心轴的封闭型盲铆钉.AI/AIA

ISO 15975 specifies dimensional and mechanical characteristics and application data for closed end blind rivets with break pull mandrel and protruding head, with a commercially pure aluminium body (Al) and an aluminium alloy mandrel (AlA) and with nominal diameters from 3,2 mm up to and including 4,8 mm.

Closed end blind rivets with break pull mandrel and protruding head - AI/AIA