21.060.40 铆钉 标准查询与下载

BS EN ISO 15976:2002 盘头离心牵引心轴的封闭型盲铆钉.St/St

ISO 15976 specifies dimensional and mechanical characteristics and application data for closed end blind rivets with break pull mandrel and protruding head, with a steel body (St) and an steel mandrel (St) and with nominal diameters from 3,2 mm up to and including 6,4 mm.

Closed end blind rivets with break pull mandrel and protruding head - St/St

BS EN ISO 15984:2002 沉头抽心敞口端盲铆钉.A2/A2

ISO 15984 specifies dimensional and mechanical characteristics and application data for open end blind rivets with break pull mandrel and countersunk head, with an austenitic stainless steel body (A2) and an austenitic stainless steel mandrel (A2) and with nominal diameters from 3 mm up to and including 5 mm.

Open end blind rivets with break pull mandrel and countersunk head - A2/A2

BS EN ISO 15982:2002 沉头抽心敞口端盲铆钉.AIA/AIA

ISO 15982 specifies dimensional and mechanical characteristics and application data for open end blind rivets with break pull mandrel and countersunk head, with an aluminium alloy body (AlA) and an aluminium alloy mandrel (AlA) and with nominal diameters from 2,4 mm up to and including 6,4 mm.

Open end blind rivets with break pull mandrel and countersunk head - AIA/AIA

ISO 15978:2002 开口型沉头抽芯盲铆钉.AIA/St

This International Standard specifies dimensional and mechanical characteristics and application data for open end blind rivets with break pull mandrel and countersunk head, with an aluminium alloy (AIA) body and a steel (St) mandrel with nominal diameters, d, from 2,4 mm up to and including 5 mm.

Open end blind rivets with break pull mandrel and countersunk head - AlA/St

ISO 16584:2002 开口型盘头抽芯盲铆钉.NiCu/St或NiCu/SSt

This International Standard specifies dimensional and mechanical characteristics and application data for open end blind rivets with break pull mandrel, protruding head, with a nickel copper body (NiCu) and either a steel (St) or stainless steel (SSt) mandrel and with nominal diameters, d, from 3,2 mm up to and including 6,4 mm.

Open end blind rivets with break pull mandrel and protruding head - NiCu/St or NiCu/SSt

ISO 16585:2002 封闭型盘头抽芯盲铆钉.A2/SSt

This International Standard specifies dimensional and mechanical characteristics and application data for dosed end blind rivets with break pull mandrel and protruding head, with an austenitic stainless-steel body (A2) and a stainless-steel mandrel (SSt) and with nominal diameters, d, from 3,2 mm up to and including 6,4 mm.

Closed end blind rivets with pull mandrel and protruding head - A2/SSt

ISO 15975:2002 封闭型盘头抽芯盲铆钉.AI/AIA

This International Standard specifies dimensional and mechanical characteristics and application data for closed end blind rivets with break pull mandrel and protruding head, with a commercially pure aluminium body (AI) and an aluminium alloy mandrel (AIA) and with nominal diameters, d, from 3,2 mm up to and including 4,8 mm.

Closed end blind rivels with break pull mandrel and protruding head - Al/AlA

ISO 15976:2002 封闭型盘头抽芯盲铆钉.St/St

This International Standard specifies dimensional and mechanical characteristics and application data for closed end blind rivets with break pull mandrel and protruding head, with a steel body (St) and an steel mandrel (St) and with nominal diameters, d, from 3,2 mm up to and including 6,4 mm.

Closed end blind rivets with break pull mandrel and protruding head - St/St

ISO 15977:2002 开口型盘头抽芯盲铆钉.AIA/St

This International Standard specifies dimensional and mechanical characteristics and application data for open end blind rivets with break pull mandrel and protruding head, with an aluminium alloy body (AIA) and a steel mandrel (St) and with nominal diameters, d, from 2,4 mm up to and including 6,4 mm.

Open end blind rivets with break pull mandrel and protruding head - AIA/St

ISO 15979:2002 开口型盘头抽芯盲铆钉.St/St

This International Standard specifies dimensional and mechanical characteristics and application data for open end blind rivets with break pull mandrel and protruding head, with a steel body (St) and a steel mandrel (St) and with nominal diameters, d, from 2,4 mm up to and including 6,4 mm.

Open end blind rivets with break pull mandrel and protruding head - St/St

ISO 15981:2002 开口型盘头抽芯盲铆钉.AIA/AIA

This International Standard specifies dimensional and mechanical characteristics and application data for open end blind rivets with break pull mandrel and protruding head, with an aluminium alloy body (AIA) and an aluminium alloy mandrel (AIA) and with nominal diameters, d, from 2,4 mm up to and including 6,4 mm.

Open end blind rivets with break pull mandrel and protruding head - AlA/AlA

ISO 15982:2002 开口型沉头抽芯盲铆钉.AIA/AIA

This International Standard specifies dimensional and mechanical characteristics and application data for open end blind rivets with break pull mandrel and countersunk head, with an aluminium alloy body (AIA) and an aluminium alloy mandrel (AIA) and with nominal diameters, d, from 2,4 mm up to and including 6,4 mm.

Open end blind rivets with break pull mandrel and countersunk head - AlA/AlA

ISO 15983:2002 开口型盘头抽芯盲铆钉.A2/A2

This International Standard specifies dimensional and mechanical characteristics and application data for open end blind rivets with break pull mandrel and protruding head, with an austenitic stainless steel body (A2) and an austenitic stainless steel mandrel (A2) and with nominal diameters, d, from 3 mm up to and including 5 mm.

Open end blind rivets with break pull mandrel and protruding head - A2/A2

ISO 15980:2002 开口型沉头抽芯盲铆钉.St/St

This International Standard specifies dimensional and mechanical characteristics and application data for open end blind rivets with break pull mandrel and protruding head, with a steel body and a steel mandrel and with nominal diameters, d, from 2,4 mm up to and including 6,4 mm.

Open end blind rivets with break pull mandrel and countersunk head - St/St

ISO 15984:2002 开口型沉头抽芯盲铆钉.A2/A2

This International Standard specifies dimensional and mechanical characteristics and application data for open end blind rivets with break pull mandrel and countersunk head, with an austenitic stainless steel body (A2) and an austenitic stainless steel mandrel (A2) and with nominal diameters, d, from 3 mm up to and including 5 mm.

Open end blind rivets with break pull mandrel and countersunk head - A2/A2

ISO 16582:2002 开口型盘头抽芯盲铆钉.Cu/St或Cu/Br或Cu/SSt

This International Standard specifies dimensional and mechanical characteristics and application data for open end blind rivets with break pull mandrel and protruding head, with a copper body (Cu) and either a steel (St) or a bronze (Br) or a stainless steel (SSt) mandrel and with nominal diameters, d, from 3 mm up to and including 4,8 mm.

Open end blind rivets with break pull mandrel and protruding head - Cu/St or Cu/Br or Cu/SSt

ISO 16583:2002 开口型沉头抽芯盲铆钉.Cu/St或Cu/Br或Cu/SSt

This International Standard specifies dimensional and mechanical characteristics and application data for open end blind rivets with break pull mandrel and countersunk head, with a copper body (Cu) and either a steel (St) or a bronze (Br) or a stainless steel (SSt) mandrel and with nominal diameters from 3 mm up to and including 4,8 mm.

Open end blind rivets with break pull mandrel and countersunk head - Cu/St or Cu/Br or Cu/SSt

LST EN ISO 15973:2002 带断拉心轴和突出头的封闭端盲铆钉 AIA/St（ISO 15973:2000）

Closed end blind rivets with break pull mandrel and protruding head - AIA/St (ISO 15973:2000)

LST EN ISO 15974:2002 带断拉心轴和沉头的封闭式盲铆钉 AIA/St（ISO 15974:2000）

Closed end blind rivets with break pull mandrel and countersunk head - AIA/St (ISO 15974:2000)

LST EN ISO 14589:2002 抽芯铆钉 机械测试（ISO 14589:2000）

Blind rivets - Mechanical testing (ISO 14589:2000)