21.060.40 铆钉 标准查询与下载

DIN EN ISO 15974:2001 带断点牵引心轴和埋头的封口式空心单面压装铆钉.AlA/St

The document specifies dimensions and mechanical properties for closed end blind rivets with break pull mandrel and countersunk head, with a rivet body made of aluminium and a mandrel made of steel and with nominal diameters from 3,2 mm up to 4,8 mm.#,,#

Closed end blind rivets with break pull mandrel and countersunk head - AlA/St (ISO 15974:2000); German version EN ISO 15974:2000

DS/EN ISO 15974:2001 带断拉心轴和沉头的封闭端盲铆钉 AIA/St

This International Standard specifies dimensional and mechanical characteristics and application data for closed end blind rivets with break pull mandrel and protruding head, with an aluminium alloy body (AIA) and a steel mandrel (St) and with nominal diameters from 3,2 mm up to and including 4,8 mm.

Closed end blind rivets with break pull mandrel and countersunk head - AIA/St

DS/EN ISO 14589:2001 抽芯铆钉 机械测试

This International Standard specifies the methods of mechanical testing of blind rivets.

Blind rivets - Mechanical testing

DS/EN ISO 15973:2001 带断拉心轴和突出头的封闭端盲铆钉 AIA/St

This International Standard specifies dimensional and mechanical characteristics and application data for closed end blind rivets with break pull mandrel and protruding head, with an aluminium alloy body (A1A) and a steel mandrel (St) and with nominal diameters from 3,2 mm up to and including 6,4 mm.

Closed end blind rivets with break pull mandrel and protruding head - AIA/St

BS EN ISO 14589:2001 盲孔铆钉.机械测试

This International Standard specifies the methods of mechanical testing of blind rivets including: — shear test (see clause 3), — tensile test (see clause 3), — mandrel head retention capability test (see clause 4), — mandrel push out resistance test (prior to setting) (see clause 5), and — mandrel break load test (see clause 6), at an ambient temperature of 10 ℃ to 35 ℃. It applies to blind rivets with nominal diameters up to and including 6,4 mm.

Blind rivets. Mechanical testing

BS EN ISO 15973:2001 封闭型盘头裂纹抽心轴盲孔铆钉.AIA/St

This International Standard specifies dimensional and mechanical characteristics and application data for closed end blind rivets with break pull mandrel and protruding head, with an aluminium alloy body (AIA) and a steel mandrel (St) and with nominal diameters from 3,2 mm up to and including 6,4 mm.

Closed and blind rivets with break pull mandrel and protruding head. AIA/St

BS EN ISO 15974:2001 封闭型沉头裂纹抽心轴盲孔铆钉.AIA/St

This International Standard specifies dimensional and mechanical characteristics and application data for closed end blind rivets with break pull mandrel and protruding head, with an aluminium alloy body (AIA) and a steel mandrel (St) and with nominal diameters from 3,2 mm up to and including 4,8 mm.

Closed and blind rivets with break pull mandrel and countersunk head. AIA/St

AIA/NAS NASM20426-2001 FSC 5320型铝钛铌合金精密埋头钉100度固体铆钉 修订1

-0426, "RIVET, SOLID, COUNTERSUNK 100' PRECISION HEAD, ALUMRJUM AND TITANIUM COLUMBIUM ALLOY", was adopted on 18 AUGUST 1998 for use by the Department of Defense (DoD). submitted to the DoD Adopting Activity: ATTN: DISC-AESD, 700 Robbins Avenue, Philadelphia, PA 19111-5096. DoD Activities may obtain copies of this standard f r o m the Standardization Doment Order Desk, 700 Robbins Avenue, Building 4D, Philadelphia, PA 19111-5094. The private sector and other Government agencies may purchase copies from the AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA, INC., 1250 EYE STREET, N. W., WASHINGTON, DC 20005-3924. Proposed changes by DoD Activities must be Defense Industrial Supply Center

Rivet, Solid, Countersunk 100 Degree, Precision Head, Aluminum and Titanium Columbium Alloy Rev. 1; FSC 5320

ONORM M 5300-2001 铆钉．技术规格

Diese ?NORM enth?lt technische Lieferbedingungen für alle genormten Nieten, ausgenommen Blindnieten und Nieten für den Bereich der Luft- und Raumfahrt. Durch diese Lieferbedingungen k?nnen Nieten in Erg?nzung zu den Angaben in den Produktnormen eindeutig bestimmt und die Prüfung sowie Abnahme festgelegt werden. Für die Lieferung von nicht genormten Nieten kann die Anwendung dieser ?NORM zwischen Auftraggeber und Auftragnehmer vereinbart werden.

Rovets - Technical specifications

ISO 14589:2000 盲铆钉 机械试验

This International Standard specifies the methods of mechanical testing of blind rivets including: — shear test (see clause 3), — tensile test (see clause 3), — mandrel head retention capability test (see clause 4), — mandrel push out resistance test (prior to setting) (see clause 5), and — mandrel break load test (see clause 6), at an ambient temperature of 10 ℃ to 35 ℃. It applies to blind rivets with nominal diameters up to and including 6,4 mm.

Blind rivets - Mechanical testing

ISO 15973:2000 封闭型盘头抽芯盲铆钉.AIA/St

This International Standard specifies dimensional and mechanical characteristics and application data for closed end blind rivets with break pull mandrel and protruding head, with an aluminium alloy body (AIA) and a steel mandrel (St) and with nominal diameters from 3,2 mm up to and including 6,4 mm.

Closed and blind rivets with break pull mandrel and protruding head - AIA/St

ISO 15974:2000 封闭型沉头抽芯盲铆钉.AIA/St

This International Standard specifies dimensional and mechanical characteristics and application data for closed end blind rivets with break pull mandrel and protruding head, with an aluminium alloy body (AIA) and a steel mandrel (St) and with nominal diameters from 3,2 mm up to and including 4,8 mm.

Closed end blind rivets with break pull mandrel and countersunk head - AIA/St

ASME B18.30.1M-2000 有断轴的开口式单面压装铆钉(米制系列)

This Standard establishes the dimensional, mechanical, and performance requirements of open-end blind rivets with break mandrels (metric series).

Open-End Blind Rivets with Break Mandrels (Metric Series)

AIA/NAS NASM20605-2000 FSC 5320型100度埋头不作结构材料的铆钉 修订1

NASM20605, "RIVET, BLINK, NONSTRUCTURAL1,0 0' E'LUSH HEAD, CLASS 2", was adopted on 18 AUGUST 1998 for use by the Department of Defense (DoD). Proposed changes bDyo D Activities must be submitted to the DoD Adopting Activity: Defense Industrial Supply Center, ATTN: DISC-AESD, 700 Rohbins Avenue, Philadelphia, PA 19111-5096. DoD Activities may obtain copies of this standard from the Standardization Document Order Des7k0,0 Robbins Avenue, Building 4D, Philadelphia, PA 19111-5094. The private sector and other Government agenciemsa y purchase copies from the AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA, INC., 1250 EYE STREET, N. W., WASHINGTON, DC 20005- 3924.

Rivet, Blind, Nonstructural, 100 Degree Flush Head Rev 1

BS ISO 1051:1999 铆钉杆直径

This International Standard specifies two series of shank diameters of rivets for general use, except blind rivets, in the range from 1 mm up to and including 36 mm.

Rivet shank diameters

BS ISO 1051:2000 铆钉杆直径

Rivet shank diameters

ASTM B316/B316M-00 铝和铝合金铆钉及冷镦头线材与棒材用标准规范

1.1 This specification covers wire and rod in the alloys (Note 1) shown in Table 1 and the tempers shown in Tables 2 [Table 3] and Table 4 [Table 5], suitable for manufacturing rivets and other similar items by cold-heading operations. Note 1-Throughout this specification the use of the term alloy in the general sense includes aluminum as well as aluminum alloy.Note 2-For rolled or cold-finished wire and rod, see Specification B221. 1.2 Alloy and temper designations are in accordance with ANSI H35.1 [H35.1M]. The equivalent Unified Numbering System alloy designations are those of Table 1 preceded by A9, for example, A91100 for aluminum 1100 in accordance with Practice E527. 1.3 For acceptance criteria for inclusion of new aluminum and aluminum alloys in this specification, see Annex A2. 1.4 The values stated in either inch-pound or SI units are to be regarded separately as standard. The SI units are shown either in brackets or in separate tables. The values stated in each system are not exact equivalents; therefore, each system must be used independently of the other. Combining values from the two systems will result in nonconformance with the specification.

Standard Specification for Aluminum and Aluminum-Alloy Rivet and Cold-Heading Wire and Rods

ANSI/ASME B18.30.1M-2000 公制分离心轴开端空心铆钉

This Standard establishes the dimensional, mechanical, and performance requirements of open-end blind rivets with break mandrels (metric series)

Metric Break Mandrel Open End Blind Rivets

EN ISO 14589:2000 盲铆钉.机械试验 ISO 14589-2000

Blind Rivets - Mechanical Testing ISO 14589: 2000

EN ISO 15973:2000 封闭型盘头抽芯盲铆钉.AIA/St ISO 15973-2000

Closed End Blind Rivets with Break Pull Mandrel and Protruding Head - AIA/St ISO 15973: 2000