21.060.40 铆钉 标准查询与下载

GOST 14799-1985 沉头铆钉(120°角)(高精度).结构及尺寸

Настоящий стандарт распространяется на заклепки с потайной головкой (угол 120 град.) с диаметром стержня от 2,6 до 6 мм для соединений с высоки

120° countersunk-head rivets (hign precision). Construction and dimensions

GOST 14803-1985 铆钉(高精度).一般技术要求

Настоящий стандарт распространяется на заклепки повышенной точности с высокими требованиями к эксплуатационной надежности

Rivets (high precision). General specifications

GOST 14802-1985 长度选择.闭合头尺寸及铆孔孔径

Настоящий стандарт устанавливает размеры, необходимые для установки заклепок при выполнении соединений ударной и прессовой клепкой

Rivets (high precision). Hole diameters for rivets, urset head dimensions and length selection

GOST 14801-1985 平头铆钉(高精度).结构及尺寸

Настоящий стандарт распространяется на заклепки с плоской головкой с диаметром стержня от 2 до 10 мм для соединений с высокими требованиям

Flat-head rivets (high precision). Construction and dimensions

GOST 14797-1985 半圆头铆钉(高精度).结构及尺寸

Настоящий стандарт распространяется на заклепки с полукруглой головкой с диаметром стержня от 1 до 10 мм для соединений с высокими требова

Button-head rivets (high precision). Construction and dimensions

GOST 14800-1985 平凸头铆钉(高精度).结构及尺寸

Настоящий стандарт распространяется на заклепки с плосковыпуклой головкой с диаметром стержня от 2 до 8 мм для соединений с высокими требо

Flat-protruding head rivets (high precision). Construction and dimensions

DIN 29732-3:1984 航空航天.带凸头的单向剪切钛合金紧公差螺栓用静载荷铆接计算值

Aerospace; rivet calculation-values, static load, for close tolerance bolts of titanium alloy, with protruding head, single shearAéronautique et espace; valeurs de calcul sous charge statique, pour vis à tige ajustée, en alliage de titane, à tête sail- l

Aerospace; rivet calculation-values, static load, for close tolerance bolts of titanium alloy, with protruding head, single shear

DIN 29733-3:1984 航空航天.沉头的单向剪切钛合金紧公差螺栓用静载荷铆接计算值

Aerospace; rivet calculation values, static load, for dose tolerance bolts of titanium alloy, with countersunk head, single shearAéronautique et espace; valeurs de calcul sous charge statique, pour vis à tige ajustée, en alliage de titane, à tête fraisée

Aerospace; rivet calculation values, static load, for close tolerance bolts of titanium alloy, with countersunk head, single shear

DIN 29734-4:1984 航空航天.平头的单向剪切盲铆钉用静载荷铆接计算值

Aerospace; rivet calculation values, static load, for blind rivets with flat head, single shearAéronautique et espace; valeurs de calcul sous charge statique, pour rivets aveugles à tête ronde aplatie, simple cisaille-mentDiese Norm ist anerkannt durch

Aerospace; rivet calculation values, static load, for blind rivets with flat head, single shear

DIN 29735-4:1984 航空航天.沉头的单向剪切盲铆钉用静载荷铆接计算值

Aerospace; rivet calculation values, static load, for blind rivets with countersunk head, single shearAéronautique et espace; valeurs de calcul sous charge statique, pour rivets aveugles à tête fraisée, simple cisaillementDiese Norm ist anerkannt durch

Aerospace; rivet calculation values, static load, for blind rivets with countersunk head, single shear

ASME B18.7.1M-1984 米制通用半空心铆钉

This Standard covers the general and dimensional data for oval head semi-tubular rivets for use in general purpose applications. The products described are suitable for joining metallic and nonmetallic materials or combinations thereof. Although these products are suitable for general purposes types are available to satisfy particular requirements, and manufacturers should be consulted for special requirements. The inclusion of dimensional data in this Standard is not intended to imply that all of the products described are stock production sizes. Consumers are requested to consult with manufacturers concerning availability of products. Metric general purpose semi-tubular rivets purchased for government use shall conform to this Standard and, additionally, to the requirements of Appendix I.

Metric general purpose semi-tubular rivets

NF E27-156:1983 紧固件.结构用圆头铆钉

Fasteners. Structural round head rivets.

ASME B18.1.3M-1983 米制小型实心铆钉

This standard covers complete general and dimensional data for those types of metric small solid rivets recognized as American National Standard. Included is an appendix covering formulas on which dimensional data are based. It should be understood, however, that where questions arise concerning acceptance of a product, the dimensions in the tables shall govern over recalculation by formula.

Metric Small Solid Rivets 12 mm Nominal Diameter and Smaller Errata - October 1985

ANSI/ASME B18.1.3M-1983 米制小型实心铆钉

This Standard covers complete general and dimensional data for those types of metric small solid rivets recognized as American National Standard. Included is an appendix covering formulas on which dimensional data are based. It should be understood, however, that where questions arise concerning acceptance of a product, the dimensions in the tables shall govern over recalculation by formula.

Metric Small Solid Rivets

CNS 8354-1982 空心铆钉（由管料制造）

本标准适用于由管料制造之空心铆钉。

Tubular Rivets Cut From The Tube

BS 4895:1981 通用半空心铆钉规范

Specifies the materials and dimensions for semi-tubular oval head, bevel countersunk head and countersunk head rivets, suitable for joining metallic and non-metallic materials, or a combination thereof.

Specification for semi-tubular rivets for general purpose use

CNS 7770-1981 金属片制四孔钮

本标准适用于金属片制四孔钮。

Sheet - Metal Four Hole Button

CNS 7769-1981 铝片制双铆钮

本标准适用于铝片制双铆钮。

Double Rivet Button

CNS 7571-1981 带形料深引伸空心铆钉

本标准适用于由带料深引伸制造之空心铆钉。

Tubular Rivets Drawn From Strip

CNS 7565-1981 铆钉工具组（铆钉头模）

本标准适用于 CNS 7337，CNS 7339 之圆头铆钉，铆钉头模。

Forming End of Rivet Setting