21.060.40 铆钉 标准查询与下载

CNS 566-1966 冷作铆钉

本标准适用于一般用之冷作铆钉（以下简称铆钉）。

Cold Headed Rivet

ASME B18.7-1966 通用半空心铆钉、全空心铆钉、开口铆钉和端盖

General Purpose Semi Tubular Rivets, Full Tubular Rivets, Split Rivits, and End Caps

BS 3575:1963 摩擦衬垫固定用铆钉规范

Specifies dimensions of hollow and solid rivets for the attachment of friction linings. Each size is designated by one letter for a hollow rivet or two letters for a solid rivet. Dimensions of the holes in the linings for reception of rivets are also given and particulars of clenching are shown.

Specification for rivets for the attachment of friction linings

NF R93-506:1955 双拼式管状铆钉

Two piece tubular rivets.

BS 1974:1953 铝合金大铆钉(标称直径1/2英寸至1英寸)规范

Small snap-head; conical head; small panhead; rounded or flat countersunk head; shallow rounded or flat countersunk head. Materials, dimensions, head shapes. Diameters with permissible variations on shank diameters. Head-forming tests and shear tests on rivet stock and rivets. Method of determining ultimate shear stress of rivet stock and manufactured rivets. Recommended point shapes for driven rivets; main requirements for driving large aluminium alloy rivets.

Specification for large aluminium alloy rivets (1/2 in. to 1 in. nominal diameters)

NF E27-153:1952 圆头铆钉

Round head rivets.

NF E27-151:1952 扁圆头铆钉

Cheese head rivets.

NF E27-152:1952 半凸起菌头铆钉

Raised mushroom head rivets.

NF E27-154:1952 沉头铆钉

Rivets with countersunk head.

NF E27-155:1952 机械结构、金属结构和锅炉用铆钉公差

Rivet tolerances for mechanical, metal and boiler construction.

BS 641:1951 通用小铆钉尺寸

Snap, pan, mushroom, flat and various countersunk headed rivets made from mild steel, copper, brass, a range of aluminium alloys and pure aluminium. Nominal diameters and lengths, permissible variations in shank diameters, details of Reaper rivets, tables of stock lengths. Cooper's flat head rivets $9H in diameter and below appended.

Dimensions of small rivets for general purposes

NF R93-507:1947 2-16mm空心铆钉

Hollow rivets from 2 to 16 mm.

NF R93-508:1943 2.5-5mm管形开口铆钉

Split tubular rivets from 2.5 to 5 mm.

NF R93-509:1943 1.6-5mm凹口铆钉

Notched rivets from 1.6 to 5 mm.

BS 1109:1943 冷闭合用冷锻低碳钢铆钉规范

Tensile and fracture tests on wire on finished rivets. (Dimensions not specified. See BS 641).

Specification for cold forged mild steel rivets for cold closing

NF E66-402:1936 热铆钉冲子.有槽圆头铆钉

SNAPS FOR HOT DRIVEN RIVETS. ROUND HEAD RIVET IMPRESSIONS.

BS 275:1927 铆钉尺寸(直径0.5英寸-1.75英寸)规范

Tabulates diameters (British and metric), with manufacturing tolerances on the shanks. Shapes and sizes of pan head, snap head, and various shapes of countersunk rivets, are illustrated. Does not apply to boiler rivets.

Specification for dimensions of rivets (1/2 inch to 13/4 inch diameter)

AS B118:1953 通用小铆钉的尺寸

Relates to such as snap, pan, mushroom, flat and various countersunk headed types. Nominal diameters and lengths are defined with permissible variations in shank diameters. These rivets are made from mild steel, copper, brass, a range of aluminium alloys

Dimensions of small rivets for general purposes

AS B145:1956 大号铝合金铆钉：公称直径1/2英寸到1英寸

Provides for small snap-head, conical head, small pan-head, rounded or flat countersunk head, shallow rounded or flat countersunk head rivets. Specifies the materials, dimensions, and head shapes for sizes from ？ to 1 in. diameters. Head-forming tests and shear tests on the rivet stock and also on the manufactured rivets are specified. Appendices describe a method of determining ultimate shear stress of rivet stock and manufactured rivets, and recommended point shapes and main requirements for satisfactory driving.

Large aluminium alloy rivets: 1/2 in. to 1 in. nominal diameters

AS A34:1938 直径1/2英寸到1－3/4英寸铆钉（不含锅炉用铆钉）的尺寸

Defines and illustrates the forms and dimensions of rivets (other than boiler rivets) of the snap head, pan head, pan head with tapered neck, rounded countersunk head and flat countersunk head types.

Dimensions of rivets from 1/2 inch to 1-3/4 inches diameter (excluding rivets for boilers)