21.060.50 销、钉 标准查询与下载

ASTM C514-01 石膏护墙板用钉标准规范

1.1 This specification covers requirements for steel wire nails suitable for use in the application of gypsum board. Note 18212;This specification does not necessarily cover nails for use where fire ratings are required. Consult manufacturers for independent data on assembly particulars, materials, and ratings.1.2 The values stated in inch-pound units are to be regarded as the standard.1.3 The text of this specification references notes and footnotes that provide explanatory material. These notes and footnotes (excluding those in tables and figures) shall not be considered as requirements of the specification.1.4 The following precautionary caveat pertains only to the test method portion, Sections 7 and 8, of this specification: This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Specification for Nails for the Application of Gypsum Board

ASTM F1575-01 钉子屈服弯矩测定的标准试验方法

1.1 This test method covers procedures for determining the bending yield moment of nails when subjected to static loading. It is intended only for nails used in engineered connection applications, in which a required connection capacity is specified by the designer. 1.2 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Test Method for Determining Bending Yield Moment of Nails

ASTM A65-01 钢轨道钉标准规范

1.1 This specification covers steel track spikes used as fastenings between railroad rails, tie plates, and ties. 1.2 Two grades of spikes are described, Grades 1 and 2, previously known as "soft" and "high carbon" steel. 1.3 Supplementary Requirement (S1) specifying copper content is provided. It shall apply only when specified by the purchaser. 1.4 The values stated in inch-pound units are to be regarded as the standard. The values given in parentheses are for information only.

Standard Specification for Steel Track Spikes

ASME B18.8.100M-2001 弹簧销:螺旋型弹簧销:有槽机器定位梢:淬火磨口型和带槽销(公制)

This Standard covers the dimensional and general data for coiled spring pins recognized as American National Standard; covers the complete dimensions and mechanical and performance requirements for metric series slotted spring pins recognized as American National Standard; covers the dimensional and general data for hardened ground dowel pins in sizes 1.5-25 mm in two series recognized as American National Standard; and covers the complete dimensional, mechanical, and performance requirements for metric series grooved pins.

Spring Pins: Coiled Type, Spring Pins: Slotted, Machine Dowel Pins: Hardened Ground, and Grooved Pins (Metric)

KS B 1309-2000 阴螺纹平行销

이 규격은 호칭 지름 6~50mm의 비경화강 및 오스테나이트계 스테인리스강 암나사붙이 평행

Parallel pins with internal thread

KS B 1339-2000 弹簧型圆柱销

이 규격은 호칭 지름 1~50mm의 강 및 오스테나이트계 또는 마텐자이트계 스테인리스강으로

Spring-type straight pins

KS B 1308-2000 有螺纹的锥形销

이 규격은 호칭 지름 6~50mm의 암나사붙이 비경화 테이퍼 핀의 특징 및 호칭 지름 5~

Taper pins with thread

KS B 1322-2000 锥形销

Taper pins

KS B 1308-2000(2015) 螺纹锥销

Taper pins with thread

KS B 1309-2000(2020) 内螺纹圆柱销

Parallel pins with internal thread

LST EN 10230-1-2000 钢丝钉 第1部分：一般用途的松钉

Steel wire nails - Part 1: Loose nails for general applications

LST EN ISO 8746:2000 圆头槽销（ISO 8746:1997）

Grooved pins with round head (ISO 8746:1997)

ASME B18.8.100M-2000 弹簧销:螺旋型弹簧销:有槽的机器定位梢:淬火的磨口型和带槽的销(米制)

This Standard covers the dimensional and general data for coiled spring pins recognized as American National Standard; covers the complete dimensions and mechanical and performance requirements for metric series slotted spring pins recognized as American National Standard; covers the dimensional and general data for hardened ground dowel pins in sizes 1.5-25 mm in two series recognized as American National Standard; and covers the complete dimensional, mechanical, and performance requirements for metric series grooved pins.

Spring Pins: Coiled Type, Spring Pins: Slotted, Machine Dowel Pins: Hardened Ground, and Grooved Pins (Metric Series)

ASME B18.8.2-2000 锥形销、定位销、直销、槽销和弹簧销(英制)

This Standard is intended to cover the complete dimensional and general data for taper pins, dowel pins, straight pins, grooved pins, and spring pins recognized as "AMERICAN NATIONAL STANDARD," which are widely used in general industrial applications. Also included are appendixes providing supplementary information for the drilling of holes for taper pins and the testing of pins in double shear. The inclusion of dimensional data in this Standard is not intended to imply that all of the products described are stock production sizes. Consumers are requested to consult with manufacturers concerning availability of product.

Taper Pins, Dowel Pins, Straight Pins, Grooved Pins, and Spring Pins (Inch Series)

ASME B18.8.200M-2000 开尾销、无头U形夹销和带头U形夹销(米制系列)

This Standard covers the complete dimensional and general data for cotter (split) pins recognized as an American National Standard. 1.1.2 The inclusion of dimensional data in this Standard is not intended to imply that all products described are stock production items. Consumers should consult with suppliers concerning the availability of products. 1.1 SCOPE, 1.1.1 This Standard covers the compelete dimensional and general data for two types, A and B, of metric series headless clevis pins intended for general applications and recognized as an American National Standard. Type A-headless clevis pins are without holes. Type B-headless clevis pins specified herein are with two holes intended for use with cotter pins; however, a means is provided to specify other hole sizes when required for use with other types of pins.

Cotter Pins, Headless Clevis Pins, and Headed Clevis Pins Metric Series

ANSI/ASME B18.8.100M-2000 弹簧销.盘式弹簧销.开槽机械合销.硬质表面凹槽销(公制系列)

This Standard covers data for metric series coiled spring pins, slotted spring pins, hardened ground pins, and grooved pins.

Spring Pins - Coiled Type, Spring Pins - Slotted, Machine Dowel Pins - Hardened Ground, and Grooved Pins (Metric Series)

ANSI/ASME B18.8.2-2000 锥形销、定位销、直销、槽销和弹簧销(英制)

This Standard is intended to cover the complete dimensional and general data for taper pins, dowel pins, straight pins, grooved pins, and spring pins recognized as American National Standard, which are widely used in general applications.

Taper Pins, Dowel Pins, Straight Pins, Grooved Pins And Spring Pins (Inch Series)

JIS B 2808:1999 直弹簧销.开口式

Spring-type straight pins -- Slotted

SANS 1700-17-19:1998 紧固件．第17部分：销．第19节：沉头槽销

Specifies the characteristics of countersunk head grooved pins which have three equally spaced grooves impressed longitudinally on their exterior surface, with nominal diameter, d1, from 1,4 mm to 20 mm inclusive.

Fasteners Part 17: Pins Section 19: Grooved pins with countersunk head

SANS 1700-17-18:1998 紧固件．第17部分：销．第18节：圆头槽销

Specifies the characteristics of round head grooved pins which have three equally spaced grooves impressed longitudinally on their exterior surface, with nominal diameter, d1, from 1,4 mm to 20 mm inclusive.

Fasteners Part 17: Pins Section 18: Grooved pins with round head