21.100.01 轴承综合 标准查询与下载

JB/T 12264-2015 滚动轴承和关节轴承 电子媒体查询结构 用特征词汇标识的特征和性能指标

本标准建立了一个用于识别滚动轴承、关节轴承、轴承座及附件的查询结构和特征词汇，主要应用于电子媒体，如互联网。 本标准不包括查询程序。

Rolling bearings and spherical plain bearings.Search structure for electronic media.Characteristics and performance criteria identified by attribute vocabulary

GSO ISO 21107:2013 滚动轴承和关节轴承 电子媒体搜索结构 由属性词汇识别的特性和性能标准

This International Standard establishes a search structure and an attribute vocabulary for identifying rolling bearings, spherical plain bearings, bearing housings and accessories, primarily with the aid of electronic media, such as the Internet. The methodology for using this International Standard in search programs is not included.

Rolling bearings and spherical plain bearings -- Search structure for electronic media -- Characteristics and performance criteria identified by attribute vocabulary

DB34/T 1727-2012 交叉滚柱式精密回转支承

本标准规定了交叉滚柱式精密回转支承的产品分类和标记、要求、试验方法、检验规则、标志、包装、运输和贮存。 本标准适用于滚动中心直径在 900 mm 以下的交叉滚柱式精密回转支承（以下简称产品）。

Cross Roller Precision Slewing Bearing

SAE J506-2011 套筒式半轴承

This SAE Standard defines the normal dimensions, dimensioning practice, tolerances, specialized measurement techniques, and glossary of terms for bearing inserts commonly used in reciprocating machinery. The standard sizes cover a range which permits a designer to employ, in proper proportion, the durability and lubrication requirements of each application, while utilizing the forming and machining practices common in manufacture of sleeve type half bearings. Not included are considerations of hydrodynamic lubrication analysis or mechanical stress factors of associated machine structural parts which determine the nominal sizes to be used, selection of bearing material as related to load carrying capacity, and economics of manufacture. for information concerning materials, see SAE J459 and SAE J460. These suggested sizes provide guidelines which may result in minimal costs of tooling but do not necessarily represent items which can be ordered from stock.

Sleeve Type Half Bearings

ASTM F2094/F2094M-11 氮化硅轴承滚珠标准规范

1.1 This specification covers the establishment of the basic quality, physical/mechanical property, and test requirements for silicon nitride balls Classes I, II, and III to be used for ball bearings and specialty ball applications. 1.2 The values stated in either SI units or inch-pound units are to be regarded separately as standard. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in non-conformance with the standard.

Standard Specification for Silicon Nitride Bearing Balls

ASTM B966-10 使用氮气测定(PM)轴承的磁导率的标准试验方法

In service, there is a space between a shaft and a self-lubricating PM bearing that contains an oil film when the bearing is operating properly. In the event the oil film is disrupted or fails to form the bearing will exhibit increased wear and possibly fail. Therefore the ability for oil to flow through the porosity of a PM bearing is critical to the performance of the bearing. The porosity of the bearing must be open to the surface and interconnected within the bearing. This allows the oil in a self-lubricating PM bearing to flow during operation to the space between the bearing and the shaft to form an oil film and protect the shaft from wear. The ability of a gas to flow through the bearing reflects the openness and interconnected properties of the porosity in the bearing. Data from this test can be used as an internal quality tool and can be reported to buyers of bearings. A number of other factors also affect the performance of the bearing and the movement of oil; factors such as the oil viscosity, operating temperature, load, shaft speed, surface area, surface finishes and others. This test provides information on only one property and cannot be the sole consideration in the design and testing of a bearing application.1.1 This test method covers the determination of the permeability of a PM bearing when subjected to pressurized nitrogen under controlled conditions. 1.2 The values stated in SI units are to be regarded as the standard with the exception of flow rate for which the cm3/min unit is the industry standard. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Test Method for Permeability of Powder Metallurgy (PM) Bearings Using Nitrogen Gas

SANS 10341:2009 轴承的安装和维护．通用导则

Gives guidelines for the installation and maintenance of the most common types of roller bearing. Recommends the tools and lubricants to be used and also suitable methods of storage and handling bearings.

Installation and maintenance of bearings - General guidelines

ASTM B438-08 铜基粉末冶金(PM)轴承(油浸的)的标准规范

1.1 This specification covers porous metallic sleeve, flange, thrust and spherical bronze-base bearings that are produced from mixed metal powders utilizing powder metallurgy (PM) technology and then impregnated with oil to supply operating lubrication. 1.2 Included are the specifications for the chemical, physical and mechanical requirements of those bronze-base PM materials that have been developed and standardized specifically for use in the manufacture of these self-lubricating bearings. 1.3 This specification is applicable to the purchase of bronze-base bearings (oil-impregnated) that were formerly covered by military specifications and are intended for government or military applications. Those additional government requirements that only apply to military bearings are listed in the Supplementary Requirements section of this specification. 1.4 This specification acccompanies Specification B 439 that covers the requirements for Iron-Base Powder Metallurgy (PM) Bearings, (Oil-Impregnated). 1.5 Typical applications for bronze-base bearings are listed in Appendix X1. 1.6 Bearing dimensional tolerance data are shown in Appendix X2, while engineering information regarding installation and operating parameters of PM bearings is included in Appendix X3. Additional useful information on self-lubricating bearings can be found in MPIF Standard 35 and the technical literature. 1.7 With the exception of density values for which the g/cm3 unit is the industry standard, the values stated in inch-pound units are to be regarded as standard. The SI equivalents of inch-pound units, shown in parenthesis, have been converted in accordance with IEEE/ASTM SI 10, may be approximate and are only for information. 1.8 The following safety hazards caveat pertains only to the test methods described in this specification. This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Specification for Bronze-Base Powder Metallurgy (PM) Bearings (Oil-Impregnated)

JB/T 10781-2007 四螺柱滚动轴承座.型式与尺寸

本标准规定了适用于安装调心滚子轴承的四螺柱剖分式轴承座（以下简称轴承座）的型式与尺寸。 本标准适用于生产厂制造和用户选型。 轴承座中的滚动轴承采用油脂润滑。 轴承座油封的工作条件： 线速度：v≤6m/s； 温度：-20℃～+80℃。

4 Sruds rolling bearings block housings.Types and dimensions

JB/T 2564-2007 滑动轴承座 技术条件

本标准规定了型式与尺寸符合JB/T 2560、JB/T 2561、JB/T 2562 、JB/T 2563 的整体有衬正滑动轴承座；对开式二螺柱正滑动轴承座、对开式四螺柱正滑动轴承座、对开式四螺柱斜滑动轴承座（以下简称滑动轴承座）的技术要求、检验规则和标志包装与贮存。 本标准规定适用于滑动轴承座的生产制造、检验和用户验收。

Technical conditions of sliding bearing blok housing

JB/T 2563-2007 对开式四螺柱斜滑动轴承座 型式与尺寸

本标准规定了对开式四螺柱斜滑动轴承座的型式与尺寸及选用要求。 本标准适用于承受径向负荷,工作环境温度40℃～+80℃的对开式四螺柱斜滑动轴承座。 本标准适用于生产厂制造和用户选型。

Four-bolt sliding bearing italic driving into two halves Types and dimensions

JB/T 2560-2007 整体有衬正滑动轴承座 型式与尺寸

本标准规定了整体有衬正滑动轴承座的型式与尺寸及选用要求。 本标准适用于承受径向负荷，工作环境温度-20℃～+80℃的整体有衬正滑动轴承座。 本标准适用于生产厂制造和用户选型。

Integral sliding bearing clock with linlin Types and dimensions

JB/T 2561-2007 对开式二螺柱正滑动轴承座 型式与尺寸

本标准规定了对开式二螺柱正滑动轴承座的型式与尺寸及选用要求。 本标准适用于承受径向负荷，工作环境温度-20℃～+80℃的对开式二螺柱正滑动轴承座。 本标准适用于生产厂制造和用户选型。

Two bolt sliding bearing clock driving into two halves Types and dimensions

JB/T 2562-2007 对开式四螺柱正滑动轴承座 型式与尺寸

本标准规定了对开式四螺柱正滑动轴承座的型式与尺寸及选用要求。 本标准适用于承受径向负荷，工作环境温度-20℃～+80℃的对开式四螺柱正滑动轴承座。 本标准适用于生产厂制造和用户选型。

Four- bolt sliding bearing clock driving into two halves-Types and dimension

KS W 1640-2005(2020) 耐磨双臂曲柄球轴承

Antifriction bellcrank ball bearings

NF E22-327:2005 滚动轴承和球面滑动轴承.电子介质用查寻结构.用属性词汇标识的特性和性能标准

Rolling bearings and spherical plain bearings - Search structure for electronic media - Characteristics and performance criteria identified by attribute vocabulary.

BS ISO 21107:2004 滚动轴承和球面滑动轴承.电子介质用查寻结构.用属性词汇标识的特性和性能标准

ISO 21107:2004 establishes a search structure and an attribute vocabulary for identifying rolling bearings, spherical plain bearings, bearing housings and accessories, primarily with the aid of electronic media, such as the Internet. The methodology for using this International Standard in search programs is not included.

Rolling bearings and spherical plain bearings - Search structure for electronic media - Characteristics and performance criteria identified by attribute vocabulary

ISO 21107:2004 滚动轴承和球面滑动轴承.电子介质用查寻结构.用属性词汇标识的特性和性能标准

This International Standard establishes a search structure and an attribute vocabulary for identifying rolling bearings, spherical plain bearings, bearing housings and accessories, primarily with the aid of electronic media, such as the Internet. The methodology for using this International Standard in search programs is not included.

Rolling bearings and spherical plain bearings - Search structure for electronic media - Characteristics and performance criteria identified by attribute vocabulary

SANS 10341:2003 支座的安装与维护．一般准则

This standard gives guidelines for the installation and maintenance of the most common types of roller bearing. 2 This standard recommends the tools and lubricants to be used and also suitable methods of storage and handling bearings.

Installation and maintenance of bearings - General guidelines

JB/T 8879-2001 关节轴承.通用技术条件

本标准规定了关节轴承的通用技术条件。对于特殊用途的轴承，应另行制定补充技术条件。 本标准适用于外形尺寸符合GB/T 9161、GB/T 9162、GB/T 9163和GB/T 9164的关节轴承。供制造厂生产、检验和用户验收。 本标准不适用于飞机机架用关节轴承。

Spherical plain bearings.General specifications