共找到 475 条与 密封件、密封装置 相关的标准,共 32 页
本标准规定了旋转轴唇形密封圈(以下简称密封圈)通用的性能试验方法。 本标准适用于在石油基液压油或润滑油中使用的内包骨架、外露骨架及装配式旋转轴唇形密封圈的性能评定。
Rotary shaft lip type seals-Performance test proceduces
本标准规定了机械密封产品性能试验的基本原则、方法和对试验装置及仪器仪表的要求。 本标准适用于各类旋转机械的机械密封。
Code for test of machanical seal
本标准规定了缠绕式垫片水压及蒸汽密封性能试验的试验机,试样和试验步骤等。 本标准适用于试验缠绕式垫片的水压密封性能和蒸汽密封性能。
Test methods for spiral wound gaskets
本标准规定了轴径从6~400mm和相应的密封腔体(以下简称腔体)内孔直径从16~440mm的旋转轴唇形密封圈(以下简称密封圈)的基本尺寸和公差。 为了保证不同制造厂生产的密封圈的互换性,本标准还规定了轴与安装孔的尺寸和公差。 本标准适用于工作压力等于或小于0.05MPa的密封圈,不适用于更高的工作压力。 为使生产厂提供的密封圈能够满足设计和使用要求,本标准的附录A为供需双方推荐了签订协议用的密封圈有关报告格式。
Rotary shaft lip type seals. Nominal dimensions and tolerances
本标准规定了机械密封产品基本型号的编写方法及有关规定。 本标准适用于各类机械密封产品。
Method of establishment for type of mechanical seals
本标准规定了装配式旋转轴唇形密封圈的基本结构、骨架和弹簧尺寸系列。 本标准适用于安装在大型、精密设备中的旋转轴端,在压差不超过0.03MPa的条件下,对流体和润滑脂起密封作用的装配式旋转轴唇形密封圈。
Rotary shaft lip seals--Design criteria for standard applications--Part 3:Assembled rotary shaft lip seals
本标准规定了外露骨架旋转轴唇形密封圈的基本结构、骨架和弹簧尺寸系列。 本标准适用于安装在设备中的旋转轴端,在压差不超过0.03MPa的条件下,对流体和润滑脂起密封作用的外露骨架旋转轴唇形密封圈。
Rotary shaft lip seals--Design criteria for standard applications--Part 2:Metal cased rotary shaft lip seals
本标准规定了内包骨架旋转轴唇形密封圈的基本结构、骨架和弹簧尺寸系列。 本标准适用于安装在设备中的旋转轴端,在压差不超过0.03MPa的条件下,对流体和润滑脂起密封作用的内包骨架旋转轴唇形密封圈。
Rotary shaft lip seals--Design criteria for standard applications--Part 1:Rubber covered rotary shaft lip seals
本标准所规定的胶料主要适用于普通液压系统耐石油基液压油和润滑油(脂)的O形橡密封圈
Rubber compounds of O-ring sealfor general hydraulic system
本标准适用于旋转轴用机械密封。
The terms of mechanical seal
1 Scope This British Standard specifies requirements for the design and dimensions of a range of spiral anti-extrusion back-up rings that prevent “O”-rings, manufactured in accordance with BS 4518, from extruding under pressure or where extrusion clearances are in excess of those specified in BS 4518. NOTE 1 These spiral back-up rings are particularly suitable for use in hydraulic diametral sealing applications where the pressures exceed 100 bar and are generally less than 200 bar, where 1 bar = 10 5 N/m 2 = 10 5 Pa. Annex B provides guidance on obsolete series of sprial back-up rings. This British Standard also specifies the shape and dimensions of housing grooves to accommodate one or two spiral back-up rings and their associated “O”-ring. NOTE 2 The range of spiral back-up rings specified in this British Standard is intended for use with “O”-rings selected from BS 4518. NOTE 3 Annex A provides guidance for the assembly of spiral back-up rings.
Dimensions of spiral anti-extrusion back-up rings and their housings. Specification
本文件规定了用于存储器防护壳体翻边压合装置的术语和定义、设计原理、技术要求、试验方法、检验规则、标志、包装、运输及贮存。 本文件适用于存储器防护壳体翻边压合装置的生产及检验。
Flanging and pressing device for memory protective shell
本文件规定了用于安全数据存储器密封结构装夹加工装置的术语和定义、设计原理、技术要求、试验方法、检验规则、标志、包装、运输及贮存。 本文件适用于安全数据存储器密封结构装夹加工装置的生产及检验。
Clamping and processing device for sealing structure of secure data storage
Sealing gaskets for cryogenic devices
Low creep filled modified PTFE gasket
Silicon nitride sealing ring for mechanical seal
Technical specifications for dry gas sealing of stirred kettles
Technical specifications for filled polytetrafluoroethylene and polytetrafluoroethylene blanks for mechanical seals
Cylindrical coil spring for mechanical seal
本文件规定了拉矫机辊用旋转密封接头的术语和定义、技术要求、试验方法、检验规则、仪器仪表、标志、包装、运输和贮存。 本文件适用于拉矫机辊用旋转密封接头的生产、检验与验收工作。
Rotary sealing joint for tension and leveling machine rollers
Copyright ©2007-2022 ANTPEDIA, All Rights Reserved
京ICP备07018254号 京公网安备1101085018 电信与信息服务业务经营许可证:京ICP证110310号