21.160 弹簧 标准查询与下载
共找到 479 条与 弹簧 相关的标准，共 32 页
Cylindrical helical springs made from round wire and bar - Calculation and design - Part 3: Torsion springs
- ICS
- 21.160
- CCS
- 发布
- 2014-05-16
- 实施
- 2014-05-16
BS ISO 18137-1. Leaf springs. Part 1. Technical requirements and test methods
- ICS
- 21.160
- CCS
- 发布
- 2014-03-27
- 实施
- 2014-03-27
Le présent document spécifie le calcul et la conception des ressorts de torsion hélicoïdaux cylindriques enroulés à froid et à chaud de caractéristiques linéaires fabriqués à partir de fils ronds et de barres, de diamètre constant ayant les valeurs du Tableau 1.
Cylindrical helical springs made from round wire and bar - Calculation and design - Part 3 : torsion springs
- ICS
- 21.160
- CCS
- J26
- 发布
- 2014-03-12
- 实施
- 2014-03-12
Cylindrical helical springs made from round wire and bar. Calculation and design. Torsion springs
- ICS
- 21.160
- CCS
- J26
- 发布
- 2014-02-28
- 实施
- 2014-02-28
This European Standard specifies the calculation and design of cold and hot coiled cylindrical helical torsion springs with a linear characteristic, made from round wire and bar of constant diameter with values according to Table 1. The user of this European Standard shall pay attention to the design of hot coiled springs, because there can be differences between the design and a real test.
Cylindrical helical springs made from round wire and bar - Calculation and design - Part 3: Torsion springs
- ICS
- 21.160
- CCS
- 发布
- 2014-01
- 实施
本标准规定了液压元件用圆截面材料等节距圆柱螺旋压缩弹簧的技术要求、试验方法、检验规则、包装、标志、运输和贮存。本标准适用于弹簧材料直径小于等于16 mm的液压元件用圆柱螺旋压缩弹簧(以下简称弹簧)。
Hydranlic cylindrically helical compression spring.Technical specifications
- ICS
- 21.160
- CCS
- J26
- 发布
- 2013-12-31
- 实施
- 2014-07-01
本标准规定了扁形钢丝圆柱螺旋压缩弹簧的技术要求、试验方法、检验规则、尺寸系列、色标、标志、包装、运输和贮存。本标准适用于扁形钢丝冷卷制造的两端并紧磨平的等节距圆柱螺旋压缩弹簧(以下简称弹簧)。
Flatted round wire compression springs
- ICS
- 21.160
- CCS
- J26
- 发布
- 2013-12-31
- 实施
- 2014-07-01
本标准规定了用圆截面材料冷卷或热卷的耐热圆柱螺旋压缩弹簧的技术要求、试验方法、检验规则及包装、标志、运输和贮存要求。本标准适用于工作温度在200℃~550℃的冷卷或热卷耐热圆柱螺旋压缩弹簧(以下简称弹簧)。
Heat resistant cylindrically helical compression springs.Technical specifications
- ICS
- 21.160
- CCS
- J26
- 发布
- 2013-12-31
- 实施
- 2014-07-01
本标准规定了热卷成形的矩形等截面材料的截锥涡卷弹簧的结构型式、技术要求、试验方法及检验规则、标志、包装、运输和贮存等。本标准适用于热卷成形的等螺旋角、等节距截锥涡卷弹簧(以下简称弹簧)。对于变截面材料的截锥涡卷弹簧可参照使用。
Volute springs.Technical specifications
- ICS
- 21.160
- CCS
- J26
- 发布
- 2013-12-31
- 实施
- 2014-07-01
本标准规定了圆柱螺旋压缩弹簧(以下简称弹簧)的超声波检测方法。本标准适用于钢丝直径为1.0 mm~8.0 mm的、两端磨平的圆柱螺旋压缩弹簧在生产过程中进行的超声波检测。
Coiled helical compression springs.Non-destructive ultrasonic testing method
- ICS
- 21.160
- CCS
- J26
- 发布
- 2013-12-31
- 实施
- 2014-07-01
本标准规定了铁磁性材质的圆柱螺旋压缩弹簧(以下简称弹簧)的磁粉检测技术和方法、质量准则及检测记录。本标准适用于钢丝直径d≥1 mm的弹簧,包括圆弧过渡的各种异形截面线材的螺旋弹簧。
Magnetic particle inspection for helical compression springs
- ICS
- 21.160
- CCS
- J26
- 发布
- 2013-12-31
- 实施
- 2014-07-01
本标准规定了圆柱螺旋弹簧的抽样检查方法。本标准适用于冷卷和热卷圆柱螺旋压缩弹簧、冷卷圆柱螺旋拉伸和扭转弹簧。其他类型弹簧的抽样检查可参照本标准。
Coiled helical springs.Sampling in spection
- ICS
- 21.160
- CCS
- J26
- 发布
- 2013-12-31
- 实施
- 2014-07-01
This part of ISO 26910 specifies general requirements for the shot peening process applied to springs in order to improve their resistance to fatigue and stress corrosion cracking, mainly by introducing compressive residual stresses into their surface layers.
Springs -- Shot peening -- Part 1: General procedures
- ICS
- 21.160
- CCS
- 发布
- 2013-12-31
- 实施
Vacuum technology－Pipeline fittings－Mounting dimensions
- ICS
- 21.160
- CCS
- 发布
- 20131230
- 实施
- 20131230
Cylindrical helical springs made from round wire and bar - Calculation and design - Part 1: Compression springs; German version EN 13906-1:2013
- ICS
- 21.160
- CCS
- J26
- 发布
- 2013-11
- 实施
This Japanese Industrial Standard specifies the steel disc springs (hereafter referred to as "springs") used in a single unit or a combination thereof.
Disc springs
- ICS
- 21.160
- CCS
- J26
- 发布
- 2013-10-21
- 实施
This Standard specifies the shot peening applied to springs in order to improve their resistance force to fatigue, stress corrosion cracking, delayed fracture, etc. mainly by introducing compressive residual stresses into their surface.
Springs.Shot peening
- ICS
- 21.160
- CCS
- J26
- 发布
- 2013-10-21
- 实施
Cylindrical helical springs made from round wire and bar - Calculation and design - Part 1: compression springs
- ICS
- 21.160
- CCS
- J26
- 发布
- 2013-10-04
- 实施
- 2013-10-04
1.1 This specification covers hot-coiled, heat-treated helical compression springs with tapered, closed, squared and ground ends made of hot-wrought round steel bars 3⁄8 in. (9.5 mm) and larger in diameter. 1.2 This specification also serves to inform the user of practical manufacturing limits, mechanical tests, and inspection requirements applicable to the type of spring described in 1.1. 1.3 Supplementary Requirements S1 to S8 inclusive of an optional nature are provided. They shall apply only when specified by the purchaser. Details of these supplementary requirements shall be agreed upon by the manufacturer and purchaser. 1.4 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard.
Standard Specification for Steel Springs, Helical, Heat-Treated
- ICS
- 21.160
- CCS
- 发布
- 2013-10-01
- 实施
Cylindrical helical springs made from round wire and bar - Calculation and design - Part 2: extension springs
- ICS
- 21.160
- CCS
- J26
- 发布
- 2013-09-14
- 实施
- 2013-09-14
