共找到 439 条与 带传动及其零件 相关的标准,共 30 页
Agricultural, detachable, and pintle chains, attachments, and sprockets; Addenda
Agricultural, detachable, and pintle chains, attachments, and sprockets; Addenda
이 규격은 일반 동력 전달의 이음매가 없는 링 모양 V벨트(이하 V벨트라 한다.)에 대하여
Classical V-Belts for power transmission
Connectors for frequencies below 3 MHz(Mc/s)-Part 7:Circular multipole connectors with bayonet or push-pull coupling
This International Standard specifies, for narrow V-belts of cross-sections 9N/J (for pulley grooves of effective width 8,9 mm), 15N/J (for pulley grooves of effective width 15,2 mm) and 25N/J (for pulley grooves of effective width 25,4 mm), — the standard effective lengths, — the tolerances on effective lengths, — the centre distance variations, — the conditions for measuring the effective length and the centre distance variation, and — the designation and marking. NOTE 1 The cross-section of a narrow V-belt is defined by a number (9, 15 or 25) followed by the letter N or J to denote single or joined belts. NOTE 2 To define belts of raw-edge cogged construction, the letter "X" is added, i.e. NX or JX.
Belt drives - Narrow V-belts - Sections 9N/J, 15N/J and 25N/J (lengths in the effective system)
This International Standard specifies, for narrow V-belts of cross-sections 9N/J (for pulley grooves of effective width 8,9 mm), 15N/J (for pulley grooves of effective width 15,2 mm) and 25N/J (for pulley grooves of effective width 25,4 mm), — the standard effective lengths, — the tolerances on effective lengths, — the centre distance variations, — the conditions for measuring the effective length and the centre distance variation, and — the designation and marking. NOTE 1 The cross-section of a narrow V-belt is defined by a number (9, 15 or 25) followed by the letter N or J to denote single or joined belts. NOTE 2 To define belts of raw-edge cogged construction, the letter "X" is added, i.e. NX or JX.
Belt drives - Narrow V-belts - Sections 9N/J, 15N/J and 25N/J (lengths in the effective system)
이 규격은 V벨트 구동, V벨트, V형 홈이 파진 풀리, V리브 벨트 구동, V리브 벨
Belt drives-V-belts and V-ribbed belts, and corresponding grooved pulleys-Vocabulary
이 규격은 편평한 전동 벨트와 이에 상응하는 풀리 치수에 대해서 규정한다. 부속서 1과 2
Belt-Flat transmission belts and corresponding pulleys-Dimensions and tolerances
Belt drives-Classical and narrow V-belts-Lengths in datum system
이 규격은 일반 및 좁은 폭 V벨트 시리즈에 대하여 규정한다.Y:기준 너비 5.3
Belt drives-Classical and narrow V-belts-Lengths in datum system
Belt drives-Classical and narrow V-belts-Lengths in datum system
This standard covers requirements for punched and embossed carrier taping of components such as silicon dies, bumped flip chip devices, and chip scale packages. Refer to EIA 48 1-1 for current industry standard for 8 mm and 12 mm taping of surface mount components.
Bare Die and Chip Scale Packages Taped in 8 mm& 12 mm Carrier Tape for Automatic Handling
Specifies dimensions and certain other properties of endless wedge belts, V-belts and their corresponding grooved pulleys for power transmission. Appendices provide recommended power ratings, information on and examples of design of belt drives, as well
Endless wedge belt and V-belt drives
이 규격은 KS M 6535에 규정하는 V벨트를 사용하는 주철제 V벨트 풀리(이하 V벨트
Grooved pulleys for classical V-belts
この規格は,JIS B 1857-1に規定する円弧歯形歯付べルト(以下,べルトという。)とかみ合う歯付プーリ(以下,プーリという。)について規定する。たたし,自動車用歯付プーリ及一般用円歯形歯付べルトは除く。
Curvilinear toothed synchronous belt drive systems for general power transmission -- Part 2: Pulley
この規格は,一般に用いられる動力伝動用の継ぎ目のない輪形の円弧歯形歯付べルト(以下,べルトという。)について規定する。たたし,自動車用歯付べルト及一般用円歯形歯付プーリは除く。
Curvilinear toothed synchronous belt drive systems for general power transmission -- Part 1: Belt
This International Standard specifies the principal characteristics of grooved pulleys (for groove sections 9N/J, 15N/J and 25N/J) intended to take both single and joined narrow V-belts for industrial power transmission drives. Some background information on the series of effective diameters is given in annex A. NOTE The effective width of a groove is regarded as the basic dimension of standardization in the effective system for grooves and for the corresponding narrow V-belts considered as a whole.
Belt drives - Grooved pulleys for narrow V-belts - Groove sections 9N/J, 15N/J and 25N/J (effective system)
This International Standard specifies the principal characteristics of grooved pulleys (for groove sections 9N/J, 15N/J and 25N/J) intended to take both single and joined narrow V-belts for industrial power transmission drives. Some background information on the series of effective diameters is given in annex A. NOTE The effective width of a groove is regarded as the basic dimension of standardization in the effective system for grooves and for the corresponding narrow V-belts considered as a whole.
Belt drives - Grooved pulleys for narrow V-belts - Groove sections 9N/J, 15N/J and 25N/J (effective system)
Specifies the principle characteristics of endless belt and pulley systems used for mechanical power transmission where positive indexing is required.
Curvilinear toothed synchronous belt drive systems
Copyright ©2007-2022 ANTPEDIA, All Rights Reserved
京ICP备07018254号 京公网安备1101085018 电信与信息服务业务经营许可证:京ICP证110310号