21.220.10 带传动及其零件 标准查询与下载

ISO 5296-2:1989 同步带传动 带 第2部分:节距代号MXL和XXL 米制尺寸

This part specifies the principal characteristics of synchronous endless belts for use in synchronous belt drives for mechanical power transmission and where positive indexing or synchronization may be required. Applies to synchronous belt drives having a pitch equal to 2,032 or 3,175 mm.

Synchronous belt drives; belts; part 2: pitch codes MXL and XXL; metric dimensions

ISO 5296-1:1989 同步带传动 带 第1部分:节距代号MXL、XL、L、H、XH和XXH 米制和英制尺寸

This second edition cancels and replaces the first edition of ISO 5296:1978, as well as its addenda 1 and 2 of 1982. This part specifies the principal characteristics of synchronous endless belts for use in synchronous belt drives for mechnical power transmission and where positive indexing or synchronization may be required.

Synchronous belt drives; belts; part 1: pitch codes MXL, XL, L, H, XH and XXH; metric and inch dimensions

NF E24-208:1989 V形带.带的均匀性.中心距变化.规范和试验方法

V-belts. Uniformity of belts. Centre distance variation. Specifications and test method.

DIN 7721-1:1989 同步皮带传动.公制节距.第1部分:同步皮带

This standard specifies the dimensions of synchronous pulleys.

Synchronous belt drives, metric pitch; synchronous belts

DIN 7721-2:1989 同步皮带传动.公制节距.第2部分:同步滑轮的齿槽轮廓

This standard specifies the dimensions of tooth space profiles of synchronous pulleys. Design dimensions are not covered.

Synchronous belt drives, metric pitch; tooth space profile of synchronous pulleys

SNI 06-1404-1989 机动车用V型带. 疲劳测试

V belt for motor vehicles, Fatigue test

NF R15-510:1988 同步皮带传动.汽车皮带

Synchronous belt drives. Automotive belts.

NF E24-311:1988 皮带传动.同步皮带.功率计算和传动中心距

Belt drive. Synchronous belts. Calculation of power rating and drive centre distance.

NF R15-511:1988 同步皮带传动.汽车皮带轮

Synchronous belt drives. Automotive pulleys.

DIN 7753-4:1988 汽车工业用环形窄三角皮带.第4部分:疲劳试验

This standard specifies a fatique test for the quality control of narrow V-belts for automotive purposes.

Endless narrow V-belts for the automotive industry; fatique testing

CSN 02 3109-1988 无接头经典V形带

Schválení ST SEV 5859-87 doporu?ilo ministerstvo pr?myslu ?SR. Zpracovatel: Barum — Rud? ?íjen, n. p., Otrokovice — Ing. Antonín Dole?al Oborové normaliza?ní st?edisko: V?zkumn? ústav gumárenské a plastiká?ské technologie, Gottwaldov Pracovník ??adu pro normalizaci a mě?ení: Ing. Jana ?í?ková

Endless classical V-belts

JIS K 6322:1988 布层传送胶带

Ply construction conveyor belts

DIN 7753-1:1988 机械工程用环形窄三角皮带.第1部分:尺寸

This standard specifies the dimensions and the method for measuring the belt length of endless narrow V-belts for engineering.

Endless narrow V-belts for mechanical engineering purposes; dimensions

GOST 20889-1988 标准截面三角传动皮带的轮毂.一般技术条件

Pulleys for driving V-belts with normal sections. General specifications

BS 4548:1987 工业用同步皮带传动规范

Requirements for drives and pulleys of pitch codes XL, L, H, XH and XXH.

Specification for synchronous belt drives for industrial applications

ISO 8370:1987 V带和带肋V带.确定节距区位置的动态试验

V- and ribbed V-belts — Dynamic test to determine pitch zone location

ISO 5295:1987 同步带 额定功率和传动中心距的计算

This second edition cancels and replaces the first edition (1981). Establishes formulae for the calculation of power synchronous belts on two pulley drives. The numerical values of certain parameters used in the calculation depend upon the pitch and the construction of the belt and shall be specified by the belt manufacturer.

Synchronous belts; Calculation of power rating and drive centre distance

BS 6889:1987 皮带同步传动轮齿条规范

Dimensions and tolerances.

Specification for generating racks for synchronous belt drive pulleys

ISO 5291:1987 带传动 带接头的三角V带槽轮 槽形截面为AJ、BJ、CJ和DJ(有效系列)

Belt drives — Grooved pulleys for joined classical V-belts — Groove sections AJ, BJ, CJ and DJ (effective system)

JIS B 1854:1987 老式V型皮带用槽轮

この規格は，JIS K 6323 (Vべルト)に規定するVべルトを用いる一般用Vプーリ(以下Vプーリという。)について規定する。ただし，JIS K 6323に規定するM形，D形及びE形に対応するVべルトを用いるものについては，溝部の形状及び寸法だけを規定する。

Grooved pulleys for classical V-belts