共找到 599 条与 固定容器和罐 相关的标准,共 40 页
Calculation of tanks and equipment made of thermoplastics Vertical, round, atmospheric tank collection devices
This European Standard gives requirements for chemical resistance of composite materials used for GRP tanks and vessels for storage or processing of fluids, for use above ground. The tanks or vessels may be factory made or site built, with or without lining.
GRP tanks and vessels for use above ground - Composite materials - Chemical resistance
GRP tanks and vessels for use above ground - Part 1 : raw materials - Specification conditions and acceptance conditions.
GRP tanks and vessels for use above ground - Part 1: Raw materials; Specification conditions and acceptance conditions; German version EN 13121-1:2003
This standard specifies the requirements for shop fabricated cylindrical, horizontal steel tanks, single and double skin for the underground storage of water polluting liquids (both flammable and non-flammable).
Workshop fabricated steel tanks - Part 1: Horizontal cylindrical single skin and double skin tanks for the underground storage of flammable and non-flammable water polluting liquids
This European Standard gives requirements for specification and acceptance conditions of raw materials for GRP tanks and vessels with or without lining for storage or processing of fluids, factory made or site built, non pressur-ised or pressurised, for use above ground.
GRP tanks and vessels for use above ground. Raw materials. Specification conditions and acceptance conditions
This European Standard gives requirements for specification and acceptance conditions of raw materials for GRPtanks and vessels with or without lining for storage or processing of fluids, factory made or site built, non pressur-ised or pressurised, for use above ground.
GRP tanks and vessels for use above ground - Part 1: Raw materials; Specification conditions and acceptance conditions
Petroleum and liquid petroleum products - Calibration of horizontal cylindrical tanks - Part 2 : internal electro-optical distance-ranging method.
Covers insulated aboveground, atmospheric tanks intended for aboveground storage of noncorrosive, stable, flammable or combustible liquids that have a specific gravity not exceeding that of water. This is the second public review for this standard. It previously appeared in the June 23, 1995 issue of Standards Action and is being resubmitted now due to substantive changes to the text.
9/26/2003 (46p)
These requirements cover nonmetallic safety cans that have nominal capacities of 5 Imperial gallons or less and that are primarily intended to store and handle fuel oil, gasoline, kerosene. Nonmetallic safety cans that are intended to store and handle liquid fuels other than those specified above may be subjected to additional requirements not covered in the Standard. These requirements cover cans of two types, designated herein as Type I and Type II
2/27/2003 (2p)
This European Standard gives requirements for chemical resistance of composite materials used for GRP tanks and vessels for storage or processing of fluids,for use above ground.The tanks or vessels may be factory made or site built,with or without lining.
GRP tanks and vessels for use above ground - Part 2: Composite materials; Chemical resistance
This standard specifies characteristics and manufacture of glass-reinforced polyester-coated steel storage tanks suitable for burial horizontally and intended for the storage of unpressurized hydrocarbons and oxygenated solvents. The tanks are cylindrical, with flat or dished ends, and of maximum capacity 82 m3. The tanks are not pressure vessels and are not intended for the storage of those hydrocarbons or other substances that require to be stored under pressure.
Glass-reinforced polyester-coated steel tanks for the underground storage of hydrocarbons and oxygenated solvents and intended for burial horizontally
Correction of Glossary Definition for Diesel Fuels - PR6560.
3/3/2003 (12p)
Petroleum and liquid petroleum products - Calibration of horizontal cylindrical tanks - Part 1 : manual methods.
本标准适用于液化石油气用夹套式钢瓶阀,其装接之容器应符合CNS 2448〔液化石油气用熔接钢瓶〕之规定。
Clip-on valves for liquefied petroleum gas
本标准适用于以套接头接续钢瓶阀之低压及高压用之夹套式调整器,且使用于丙烷及丁烷气相状态,最高气相压力为20bar及最大容量为每小时20公斤,而操作温度范围-5℃至55℃。
Clip on regulator for liquefied petroleum gas
This part of ISO 12917 specifies a method for the calibration of horizontal cylindrical tanks having diameters greater than 2 m by means of internal measurements using an electro-optical distance-ranging instrument, and for the subsequent compilation of tank-capacity tables. This method is known as the internal electro-optical distance-ranging (EODR) method. This part of ISO 12917 is applicable to tanks inclined by up to 10 % from the horizontal, provided a correction is applied for the measured tilt.
Petroleum and liquid petroleum products - Calibration of horizontal cylindrical tanks - Internal electro-optical distance-ranging method
note:1) ISO 10341:1997, Ophthalmic instruments —Refractor heads.
Petroleum and liquid petroleum products - Calibration of horizontal cylindrical tanks - Manual methods
Copyright ©2007-2022 ANTPEDIA, All Rights Reserved
京ICP备07018254号 京公网安备1101085018 电信与信息服务业务经营许可证:京ICP证110310号