23.020.10 固定容器和罐 标准查询与下载

LST EN 13280-2002 地上储存冷水用单件式和分段式玻璃纤维增强蓄水池规范

Specification for glass fibre reinforced cisterns of one piece and sectional construction, for the storage, above ground, of cold water

CNS 1323-2002 液化石油气用熔接钢瓶检验法

1.1.1 本标准适用于按照 CNS 2448 规定制作之水容积 4.7 公升以上，120 公升以下，灌装液化丙烷，液化丙烯，液化丁烷，液化丁二烯，以及其它液化石油气，而其使用温在 40℃ 以下，以电弧熔接，或自动电弧熔接法制造之液化石油气钢瓶瓶身之检验。1.1.2 本标准分为完成检验及

Metlod of test code for liurefied petroleun gas cylinder(cylinder body)

DVS 2205-2 Beiblatt 2-2002 由热塑性塑料制成的罐和设备的计算 常设圆形非加压罐 收集设备

Calculation of tanks and equipment made of thermoplastic plastics Standing round non-pressurized tank collection equipment

DVS 2205-2 Beiblatt 1-2002 用于室内安装的由热塑性塑料制成的焊接固定罐

Welded fixed tanks made of thermoplastic for indoor installation

ISO 12917-2:2002 石油和液态石油产品.卧式圆筒状油罐的标定.第2部分:光电内测距法

This part of ISO 12917 specifies a method for the calibration of horizontal cylindrical tanks having diameters greater than 2 m by means of internal measurements using an electro-optical distance-ranging instrument, and for the subsequent compilation of tank-capacity tables. This method is known as the internal electro-optical distance-ranging (EODR) method. This part of ISO 12917 is applicable to tanks inclined by up to 10 % from the horizontal, provided a correction is applied for the measured tilt.

Petroleum and liquid petroleum products - Calibration of horizontal cylindrical tanks - Part 2: Internal electro-optical distance-ranging method

DVS 2205-2 Beiblatt 3-2002 由热塑性塑料制成的储罐和设备的计算 立式圆形非加压储罐 平屋顶

Calculation of storage tanks and equipment made of thermoplastic plastics Vertical round non-pressurized storage tanks with flat roofs

DVS 2205-2-2002 由热塑性塑料制成的储罐和设备的计算 立式圆形常压储罐

Calculation of storage tanks and equipment made of thermoplastic plastic Vertical circular atmospheric storage tanks

UL 142-2002 易燃和可燃液体用地上钢贮罐

Contains changes to requirement regarding normal and emergency venting.

Steel aboveground tanks for flammable and combustible liquids

ISO 12917-1:2002 石油和液化石油产品.卧式圆形油罐的校正.第1部分:手工法

This part of ISO 12917 specifies manual methods for the calibration of nominally horizontal cylindrical tanks, installed at a fixed location. It is applicable to horizontal tanks up to 4 m in diameter and 30 m in length. The methods are applicable to insulated and non-insulated tanks, either when they are above-ground or underground. The methods are applicable to pressurized tanks, and to both knuckle-dish-end and flat-end cylindrical tanks as well as elliptical and spherical head tanks. This part of ISO 12917 is applicable to tanks inclined by up to 10 % from the horizontal provided a correction is applied for the measured tilt. For tanks over and above these dimensions and angle of tilt, appropriate corrections for tilt and appropriate volume computations should be based on the "Coats" equation [1],

Petroleum and liquid petroleum products - Calibration of horizontal cylindrical tanks - Part 1: Manuel methods

DVS 2205-1-2002 由热塑性塑料制成的容器和设备的设计计算 特征值

Design calculations for containers and apparatus made from thermoplastics - Characteristic Values

UL 80 BULLETINS-2002

Correction of Glossary Definition for Diesel Fuels - PR6560.

6/14/2002 (12p)

DIN EN 13280:2001 地上储存冷水用整体式和组合式玻璃纤维增强储水池规范

The document specifies the requirement for rectangular and vertical cylindrical glass reinforced plastics (GRP) one piece cisterns and rectangular sectional tanks for the storage of water above ground for both domestic and industrial use within the following capacity ranges a) one piece cistern, 500 l to 100000 l.; b) sectional tank, 500 l and larger. Particular requirements for additional components for cisterns for domestic use are also included.

Specification for glass fibre reinforced cisterns of one piece and sectional construction, for the storage, above ground, of cold water; German version EN 13280:2001

BS EN 13280:2001 地上储存冷水用整体式结构和组合结构的玻璃纤维增强的蓄水池规范

This European Standard specifies the requirements for rectangular and vertical cylindrical glass reinforced plastics (GRP) one-piece cisterns and rectangular sectional tanks for the storage of water above ground for both domestic and industrial use within the following capacity ranges; a) one-piece cistern 500 l to 100 000 l; b) sectional tank 500 l and larger. Particular requirements for additional components for cisterns for domestic use are also included.

Specification for glass fibre reinforced cisterns of one-piece and sectional construction, for the storage, above ground, of cold water

UL 58 BULLETINS-2001 2001年10月1日(4页)

Based on comments received, UL announces the withdrawal of the proposed underground tank marking requirement revisions published in Appendix B of the UL 58 (142, 1316, & 1746) Proposal Bulletin dated February 2, 1999 and the UL 58 (1316 & 1746) Proposal Bulletin dated October 18, 2000.

10/01/2001 (4p)

EN 13280:2001 地上储存冷水用整体式结构和组合结构的玻璃纤维增强蓄水池规范

This European Standard specifies the requirements for rectangular and vertical cylindrical glass reinforced plastics (GRP) one-piece cisterns and rectangular sectional tanks forThe storage of water above ground for both domestic and industrial use withinThe following capacity ranges;a) one-piece cistern 500 l to 100 000 l;b) sectional tank 500 l and larger.Particular requirements for additional components for cisterns for domestic use are also

Specification for glass fibre reinforced cisterns of one piece and sectional construction, for the storage, above ground, of cold water

ASTM D4097-95ae3 接触式玻璃纤维增​​强热固性树脂耐腐蚀罐标准规范

Standard Specification for Contact-Molded Glass-Fiber-Reinforced Thermoset Resin Corrosion-Resistant Tanks

CNS 9802-2001 压力容器之快速开关盖装置

Quick closure pressure vessels

CNS 9801-2001 压力容器之耐压试验及泄漏试验

本标准适用于 CNS 9788 〔压力容器（通则）〕中之耐压试验及泄漏试验。备考 1：本标准所引用之标准如下 CNS 9788 〔压力容器（通则）〕2：在本标准中以｛ ｝ 表示之单位及数值，系习用之单位制，并记以供参考。

Pressure and leak for pressure vessels

CNS 9800-2001 压力容器熔接接头之机械试验

本标准适用于 CNS 9788 〔压力容器（通则）〕中有关压力容器熔接接头之机械试验。备考：兹将本标准所引用之标准如下。 CNS 9788 〔压力容器（通则）〕 CNS 9803 〔压力容器熔接施工方法之确认试验〕 CNS 3033 〔金属材料冲击试验片〕 CNS 3034 〔金属材料冲击试验片〕 CNS 3

Production test for pressure vessels

CNS 9799-2001 压力容器之应力解析及疲劳解析

本标准适用于 CNS 9788 〔压力容器（通则）〕第 3 节级分类之第一种容器之应力解析及疲劳解析。备考：1. 本标准虽以第一种容器为适用范围但对第二种、第三种容器其为特殊构造，而不能适用 CNS 9788 规定之第二种容器及第三容器之强度算之容器或容器之部分亦可适用。2. 本标

Stress and fatigue analyses for pressure vessels