23.020.30 压力容器、气瓶 标准查询与下载
共找到 2470 条与 压力容器、气瓶 相关的标准，共 165 页
本文件规定了焊接绝热气瓶充装站（以下简称充装站）的职责和必须具备的安全技术条件。 本文件适用于在正常环境温度（-40℃～60℃）下使用，贮存介质为液氧、液氮、液氩、液化天然气、二氧化碳等低温液化气体，公称容积为10L～1000L，工作压力为0.2MPa～3.5MPa可重复充装的焊接绝热气瓶（以下简称气瓶）充装站。 本文件不适用于汽车用液化天然气气瓶充装站。
Safety technical conditions for filling stations of welded insulated gas cylinders
- ICS
- 23.020.30
- CCS
- J 74
- 发布
- 2021-12-31
- 实施
- 2022-03-31
本文件规定了汽车用液化天然气（Liquefied NaturalGas，简称LNG)气瓶的形式、产品型号、容积 规格、基本参数、使用规定以及日常维护保养等要求。 本文件适用于在正常环境温度（-40℃～60℃）下使用、贮存介质为LNG、设计温度不高于-196℃、 公称容积为150L～1500L、公称工作压力为0.8MPa～3.5MPa的用作汽车燃料箱的可重复充装焊接绝热气 瓶。
Specification for use of liquefied natural gas (LNG) cylinders for automobiles
- ICS
- 23.020.30
- CCS
- D451
- 发布
- 2021-12-30
- 实施
- 2022-08-15
本文件规定了压力容器产品下料工艺规程的术语和定义、一般要求、工艺流程、切割下料技术要求、对接头及位置要求、加工余量要求、样板制作要求、号料要求。 本文件适用于压力容器产品下料工艺指导，其它非容器产品下料时也可参照使用。
Pressure Vessel Product Cutting Process Regulations
- ICS
- 23.020.30
- CCS
- C333
- 发布
- 2021-12-29
- 实施
- 2021-12-29
Electronic identification of gas cylinders for vehicles Part 1: Identifiers and basic information
- ICS
- 23.020.30
- CCS
- J 74
- 发布
- 2021-12-01
- 实施
- 2022-01-01
This document specifies requirements for the design, materials, manufacturing and testing of pressure vessels and pressure vessel parts intended for use with a maximum allowable pressure, PS, equal or less than:- 100 bar when containing gases or liquids in group 1 or 2-1000 bar w
Unfired pressure vessels - Part 6: Requirements for the design and fabrication of pressure vessels and pressure parts constructed from spheroidal graphite cast iron; German version EN 13445-6:2021
- ICS
- 23.020.30
- CCS
- 发布
- 2021-12-00
- 实施
This Part 10 of this document specifies requirements for unfired pressure vessels and their parts made of nickel and nickel alloys (see 3.1) in addition to the general requirements for unfired pressure vessels under EN 13445-1:2019, EN 13445-2:2019, EN 13445-3:2019, EN 13445-4:20
Unfired pressure vessels - Part 10: Additional requirements for pressure vessels of nickel and nickel alloys; German version EN 13445-10:2021
- ICS
- 23.020.30
- CCS
- 发布
- 2021-12-00
- 实施
This document specifies requirements for unfired pressure vessels and their parts made of aluminium and aluminium alloys in addition to the general requirements for unfired pressure vessels under EN 13445:2019 Parts 1 to 5. This document specifies unfired pressure vessels for loa
Unfired pressure vessels - Part 8: Additional requirements for pressure vessels of aluminium and aluminium alloys; German version EN 13445-8:2021
- ICS
- 23.020.30
- CCS
- 发布
- 2021-12-00
- 实施
This document defines the terms, definitions, quantities, symbols and units that are used throughout the EN 13445 series and gives general information on the design and manufacturing of vessels under this standard.It also contains instructions on how to use the standard (Annex A)
Unfired pressure vessels - Part 1: General; German version EN 13445-1:2021
- ICS
- 23.020.30
- CCS
- 发布
- 2021-12-00
- 实施
This Part of the European Standard EN 13445 specifies the requirements for materials (including clad materials) for unfired pressure vessels and supports which are covered by EN 13445-1:2009 and manufactured from metallic materials; it is currently limited to steels with sufficie
Unfired pressure vessels - Part 2: Materials; German version EN 13445-2:2021
- ICS
- 23.020.30
- CCS
- 发布
- 2021-12-00
- 实施
This Part of this document specifies the inspection and testing of individual and serially produced pressure vessels made of steels in accordance with EN 13445-2:2019.Special provisions for cyclic operation are given in Annex G of this Part.Special provisions for vessels or vesse
Unfired pressure vessels - Part 5: Inspection and testing; German version EN 13445-5:2021
- ICS
- 23.020.30
- CCS
- 发布
- 2021-12-00
- 实施
This document specifies requirements for the manufacture of unfired pressure vessels and their parts, made of steels, including their connections to non-pressure parts. It specifies requirements for material traceability, manufacturing tolerances, welding requirements, requiremen
Unfired pressure vessels - Part 4: Fabrication; German version EN 13445-4:2021
- ICS
- 23.020.30
- CCS
- 发布
- 2021-12-00
- 实施
This Part of this document specifies requirements for the design of unfired pressure vessels covered by EN 13445-1:2021 and constructed of steels in accordance with EN 13445-2:2021. EN 13445-5:2021, Annex C specifies requirements for the design of access and inspection openings,
Unfired pressure vessels - Part 3: Design; German version EN 13445-3:2021, only on CD-ROM
- ICS
- 23.020.30
- CCS
- 发布
- 2021-12-00
- 实施
为规范储气井的定期检验工作，保证检验工作质量，本文件适用于根据SY/T 6535-2002设计制造的储存压缩天然气的储气井的定期检验。用于储存其它非腐蚀性气体的储气井的定期检验可参照执行。规定了储气井定期检验的检验机构和人员、定期检验周期、定期检验要求、安全状况等级评定、检验记录与检验报告。
The gas storage well inspection regulation
- ICS
- 23.020.30
- CCS
- M745
- 发布
- 2021-10-21
- 实施
- 2021-12-01
Unfired pressure vessels - Part 2: Materials
- ICS
- 23.020.30
- CCS
- 发布
- 2021-10-07
- 实施
- 2021-10-07
Unfired pressure vessels -- Part 4: Fabrication
- ICS
- 23.020.30
- CCS
- 发布
- 2021-10-06
- 实施
- 2021-10-06
Unfired pressure vessels -- Part 8: Additional requirements for pressure vessels of aluminium and aluminium alloys
- ICS
- 23.020.30
- CCS
- 发布
- 2021-10-06
- 实施
- 2021-10-06
Unfired pressure vessels -- Part 3: Design
- ICS
- 23.020.30
- CCS
- 发布
- 2021-10-06
- 实施
- 2021-10-06
Unfired pressure vessels -- Part 5: Inspection and testing
- ICS
- 23.020.30
- CCS
- 发布
- 2021-10-06
- 实施
- 2021-10-06
Unfired pressure vessels -- Part 6: Requirements for the design and fabrication of pressure vessels and pressure parts constructed from spheroidal graphite cast iron
- ICS
- 23.020.30
- CCS
- 发布
- 2021-10-06
- 实施
- 2021-10-06
Unfired pressure vessels -- Part 2: Materials
- ICS
- 23.020.30
- CCS
- 发布
- 2021-10-06
- 实施
- 2021-10-06
