23.020.40 低温容器 标准查询与下载
共找到 337 条与 低温容器 相关的标准，共 23 页
Covering the EIGA-proposal: CO2-vessels shall be depressurized using a written procedure. Liquid carbon dioxide vessels that have lost pressure shall be repressurized using a written procedure. The material properties of the vessel have to be considered.
Cryogenic vessels - Large transportable vacuum insulated vessels - Part 3: Operational requirements; German version EN 13530-3:2002 + A1:2005
- ICS
- 23.020.40
- CCS
- A82
- 发布
- 2005-09
- 实施
- 2005-09-01
This European Standard specifies operational requirements for large transportable vacuum insulated cryogenic vessels of more than 1000 l volume.This European Standard applies to vessels designed for cryogenic fluids specified in EN 13530-1.
Cryogenic vessels – Large transportable vacuum insulated vessels – Part 3: Operational requirements
- ICS
- 23.020.40
- CCS
- 发布
- 2005-08-26
- 实施
- 2005-08-26
Cryogenic vessels - Static non vacuum insulated vessels - Part 3: Operational requirements
- ICS
- 23.020.40
- CCS
- 发布
- 2005-08-10
- 实施
- 2005-08-10
Cryogenic vessels - Static vacuum insulated vessels - Part 3: Operational requirements
- ICS
- 23.020.40
- CCS
- 发布
- 2005-08-10
- 实施
- 2005-08-10
Cryogenic vessels - Large transportable vacuum insulated vessels - Part 3: Operational requirements
- ICS
- 23.020.40
- CCS
- 发布
- 2005-08-10
- 实施
- 2005-08-10
This International Standard specifies the minimum requirements for the design, manufacture and testing of pumps for cryogenic service. This International Standard is applicable to centrifugal pumps. However the principles may be applied to other types of pump (e.g. reciprocating pumps). This International Standard also gives guidance on the design of installations (see Annex A). It does not specify requirements for operation or maintenance. NOTE For cryogenic fluids, see ISO 21029-1, ISO 20421-1 and/or ISO 21009-1.
Cryogenic vessels - Pumps for cryogenic service
- ICS
- 23.020.40
- CCS
- J71
- 发布
- 2005-04-15
- 实施
This International Standard specifies the minimum requirements for the cleanliness of all surfaces of cryogenic vessels and associated accessories that are in contact with the cryogenic fluid at any expected operating conditions. This International Standard defines the acceptable level of surface and particle contamination to minimize the risk of malfunction of equipment and ensure safety against ignition when in contact with oxygen or oxidizing fluids (see ISO 10156-2).
Cryogenic vessels - Cleanliness for cryogenic service
- ICS
- 23.020.40
- CCS
- A82
- 发布
- 2005-02-15
- 实施
Cryogenic vessels - Transportable vacuum insulated vessels of not more than 1 000 litres volume - Part 1: Design, fabrication, inspection and tests
- ICS
- 23.020.40
- CCS
- A82
- 发布
- 2004-12
- 实施
This European Standard specifies operational requirements for static non vacuum insulated vessels for cryogenic fluids according to EN 14197-1, designed for a maximum allowable pressure greater than 0,5 bar. It can be used as a guideline for vessels designed for a maximum allowable pressure of not more than 0,5 bar. The scope includes installation, putting into service, inspection, filling, maintenance and emergency procedures. This European Standard applies to vessels for cryogenic fluids as specified in EN 14197-1.
Cryogenic vessels - Static non-vacuum insulated vessels - Part 3: Operational requirements
- ICS
- 23.020.40
- CCS
- 发布
- 2004-11-14
- 实施
- 2004-10-12
Cryogenic vessels - Static non-vacuum insulated vessels - Part 3: Operational requirements
- ICS
- 23.020.40
- CCS
- 发布
- 2004-10-29
- 实施
- 2004-10-29
Cryogenic vessels - Large transportable vacuum insulated vessels - Part 2 : design, fabrication, inspection and testing.
- ICS
- 23.020.40
- CCS
- A82
- 发布
- 2004-10-01
- 实施
- 2004-10-20
Cryogenic vessels - Large transportable vacuum insulated vessels - Part 2: Design, fabrication, inspection and testing
- ICS
- 23.020.40
- CCS
- 发布
- 2004-09-24
- 实施
- 2004-09-24
Cryogenic vessels - Static non-vacuum insulated vessels - Part 3 : operational requirements.
- ICS
- 23.020.40
- CCS
- A82
- 发布
- 2004-09-01
- 实施
- 2004-09-20
ISO 21010:2004 specifies gas/materials compatibility requirements (such as chemical resistance) for cryogenic vessels but it does not cover mechanical properties (e.g. for low temperature applications). It gives general guidance for compatibility with gases and detailed compatibility requirements for oxygen and oxygen-enriched atmospheres. ISO 21010:2004 also defines the testing methods for establishing oxygen compatibility of materials (metallic and non-metallic) to be used for cryogenic vessels and associated equipment. It focuses on materials that are normally with or could be in contact with cryogenic fluids.
Cryogenic vessels - Gas/materials compatibility
- ICS
- 23.020.40
- CCS
- J73
- 发布
- 2004-07-08
- 实施
- 2004-07-08
This part of ISO 21028 specifies the toughness requirements of metallic materials for use at temperatures below - 80 ℃ to ensure their suitability for cryogenic vessels. It is not applicable to unalloyed steels and cast materials.
Cryogenic vessels - Toughness requirements for materials at cryogenic temperature - Part 1: Temperatures below -80 °C
- ICS
- 23.020.40
- CCS
- A82
- 发布
- 2004-07-01
- 实施
Cryogenic vessels - Static non-vacuum insulated vessels - Part 1: Fundamental requirements
- ICS
- 23.020.40
- CCS
- 发布
- 2004-06-30
- 实施
- 2004-06-30
Cryogenic vessels - Large transportable non-vacuum insulated vessels - Part 3: Operational requirements
- ICS
- 23.020.40
- CCS
- 发布
- 2004-06-30
- 实施
- 2004-06-30
Cryogenic vessels - Large transportable non-vacuum insulated vessels - Part 1: Fundamental requirements
- ICS
- 23.020.40
- CCS
- 发布
- 2004-06-30
- 实施
- 2004-06-30
Cryogenic vessels - Static vacuum insulated vessels - Part 3: Operational requirements
- ICS
- 23.020.40
- CCS
- 发布
- 2004-06-30
- 实施
- 2004-06-30
Cryogenic vessels - Static non-vacuum insulated vessels - Part 3: Operational requirements
- ICS
- 23.020.40
- CCS
- 发布
- 2004-06-30
- 实施
- 2004-06-30
