23.020.40 低温容器 标准查询与下载
共找到 337 条与 低温容器 相关的标准，共 23 页
This European Standard specifies the fundamental requirements for large transportable non-vacuum insulated cryogenic vessels and designed to operate above atmospheric pressure. This standard applies to large transportable non-vacuum insulated cryogenic vessels for fluids as specified in 3.1 and is not applicable to such vessels designed for toxic fluids.
Cryogenic vessels - Large transportable non-vacuum insulated vessels - Fundamental requirements
- ICS
- 23.020.40
- CCS
- A82
- 发布
- 2003-09-03
- 实施
- 2003-09-03
This European Standard specifies the fundamental requirements for static non-vacuum insulated cryogenic vessels designed for a maximum allowable pressure greater than 0,5 bar. This European Standard applies to static non-vacuum insulated cryogenic vessels for fluids as specified in 3.1. For static non vacuum insulated cryogenic vessels designed for a maximum allowable pressure of not more than 0,5 bar, this European Standard can be used as a guide. This European Standard is not applicable to vessels built on-site.
Cryogenic vessels - Static non-vacuum insulated vessels - Fundamental requirements
- ICS
- 23.020.40
- CCS
- A82
- 发布
- 2003-09-02
- 实施
- 2003-09-02
Cryogenic vessels - Static vacuum insulated vessels - Part 3 : operational requirements.
- ICS
- 23.020.40
- CCS
- A82
- 发布
- 2003-09-01
- 实施
- 2003-09-20
This European Standard specifies operational requirements for large transportable non vacuum insulated cryogenic vessels of more than 1000 I volume.
Cryogenic vessels - Large transportable non-vacuum insulated vessels - Part 3: Operational requirements
- ICS
- 23.020.40
- CCS
- 发布
- 2003-08-01
- 实施
This European Standard specifies requirements for the design, fabrication, inspection and testing of large transportable non vacuum insulated cryogenic vessels of more than 1000 l volume, which are permanently (fixed tanks) or not permanently (demountable tanks) attached to a vehicle, for carriage by road. However, it can be used for other mode of transport providing the specific regulations/requirements are complied with. This European Standard applies to large transportable non vacuum insulated cryogenic vessels for fluids specified in EN 14398-1 and does not apply to vessels designed for toxic fluids. This European Standard does not include the general vehicle requirements e.g. running gear, brakes, lighting etc. that shall be in accordance with the relevant standards/regulations.
Cryogenic vessels - Large transportable non-vacuum insulated vessels - Part 2: Design, fabrication, inspection and testing Incorporates Amendment A2: 2008
- ICS
- 23.020.40
- CCS
- A82
- 发布
- 2003-08-01
- 实施
This European Standard specifies the fundamental requirements for static non-vacuum insulated cryogenic vessels designed for a maximum allowable pressure greater than 0,5 bar.
Cryogenic vessels - Static non-vacuum insulated vessels - Part 1: Fundamental requirements
- ICS
- 23.020.40
- CCS
- 发布
- 2003-08-01
- 实施
This European Standard specifies the fundamental requirements for large transportable non-vacuum insulatedcryogenic vessels and designed to operate above atmospheric pressure.
Cryogenic vessels - Large transportable non-vacuum insulated vessels - Part 1: Fundamental requirements
- ICS
- 23.020.40
- CCS
- 发布
- 2003-08-01
- 实施
1 This European Standard specifies operational requirements for static vacuum insulated vessels designed for a maximum allowable pressure of more than 0.5 bar. It may also be used as a guideline for vessels designed for a maximum allowable pressure of less than 0,5 bar. 2 This European Standard applies to vessels designed for cryogenic fluids specified in EN 13458-1.
Cryogenic vessels - Static vacuum insulated vessels - Operational requirements
- ICS
- 23.020.40
- CCS
- A82
- 发布
- 2003-06-11
- 实施
- 2003-06-11
This European Standard specifies operational requirements for static vacuum insulated vessels designed fora maximum allowable pressure of more than 0.5 bar. It may also be used as a guideline for vessels designed for amaximum allowable pressure of less than 0,5 bar.
Cryogenic vessels - Static vacuum insulated vessels - Part 3: Operational requirements (Incorporates Amendment A1: 2005)
- ICS
- 23.020.40
- CCS
- 发布
- 2003-05-01
- 实施
Cryogenic vessels - Large transportable vacuum insulated vessels - Part 2: Design, fabrication, inspection and testing
- ICS
- 23.020.40
- CCS
- 发布
- 2003-04-02
- 实施
- 2003-04-02
Cryogenic vessels - Large transportable vacuum insulated vessels - Part 3: Operational requirements
- ICS
- 23.020.40
- CCS
- 发布
- 2003-04-02
- 实施
- 2003-04-02
Cryogenic vessels - Safety devices for protection against excessive pressure - Part 3: Determination of required discharge - Capacity and sizing
- ICS
- 23.020.40
- CCS
- 发布
- 2003-04-02
- 实施
- 2003-04-02
Cryogenic vessels - Large transportable vacuum insulated vessels - Part 1: Fundamental requirements
- ICS
- 23.020.40
- CCS
- 发布
- 2003-04-02
- 实施
- 2003-04-02
Cryogenic vessels - Static vacuum insulated vessels - Part 1: Fundamental requirements
- ICS
- 23.020.40
- CCS
- 发布
- 2003-04-02
- 实施
- 2003-04-02
Cryogenic vessels - Static vacuum insulated vessels - Part 2 : design, fabrication, inspection and testing.
- ICS
- 23.020.40
- CCS
- J74
- 发布
- 2003-04-01
- 实施
- 2003-04-20
This standard specifies requirements for the design, fabrication, inspection and testing of static vacuum insulated cryogenic vessels designed for a maximum allowable pressure of more than 0,5 bar. This standard is applicable to static vacuum insulated cryogenic vessels for fluids as specified in EN 13458-1; and does not apply to vessels designed for toxic fluids. For static vacuum insulated cryogenic vessels designed for a maximum allowable pressure of not more than 0,5 bar this standard can be used as a guide.
Cryogenic vessels - Static vacuum insulated vessels - Part 2: Design, fabrication, inspection and testing
- ICS
- 23.020.40
- CCS
- 发布
- 2003-03-07
- 实施
- 2003-02-25
This standard provides a separate calculation method for determining the contributing mass flow to be relieved resulting from each of the following specified conditions: - vacuum insulated vessels with insulation system (outer jacket + insulating material) intact under normal vacuum. Outer jacket at ambient temperature. Inner vessel at temperature of the contents at the relieving pressure; - vacuum insulated vessels with insulation system remaining in place but with loss of vacuum, or non vacuum insulated vessels with insulation system intact. Outer jacket at ambient temperature. Inner vessel at temperature of the contents at the relieving pressure; - vacuu
Cryogenic vessels - Safety devices for protection against excessive pressure - Part 3: Determination of required discharge - Capacity and sizing
- ICS
- 23.020.40
- CCS
- 发布
- 2003-03-04
- 实施
- 2003-01-23
The document specifies requirements for the design, fabrication, inspection and testing of static vacuum insulated cryogenic vessels designed for a maximum allowable pressure of more than 0,5 bar. This European Standard is applicable to static vacuum insulated cryogenic vessels for fluids as specified in prEN 13458-1, and does not apply to vessels designed for toxic fluids. For static vacuum insulated cryogenic vessels designed for a maximum allowable pressure of not more than 0,5 bar this standard can be used as a guide.#,,#
Cryogenic vessels - Static vacuum insulated vessels - Part 2: Design, fabrication, inspection and testing; German version EN 13458-2:2002
- ICS
- 23.020.40
- CCS
- A82
- 发布
- 2003-02
- 实施
- 2003-02-01
This standard specifies requirements for the design, fabrication, inspection and testing of large transportable vacuum insulated cryogenic vessels of more than 1000 litres volume, which are permanently (fixed tanks) or not permanently (demountable tanks) attached to a vehicle, for carriage by road.
Cryogenic vessels - Large transportable vacuum insulated vessels - Part 2: Design, fabrication, inspection and testing
- ICS
- 23.020.40
- CCS
- 发布
- 2003-01-08
- 实施
- 2002-12-20
This part 2 of this standard applies to the design, fabrication, inspection and testing of large transportable vacuum insulated cryogenic vessels of more than 1000 litres volume, which are permanently (fixed tanks) or not permanently (demountable tanks) attached to a vehicle, for carriage by road. This part applies to large transportable non vacuum insulated cryogenic vessels for fluids specified in part 1 of this standard and is not applicable to vessels designed for toxic fluids.
Cryogenic vessels - Large transportable vacuum insulated vessels - Part 2: Design, fabrication, inspection and testing; German version EN 13530-2:2002
- ICS
- 23.020.40
- CCS
- A82
- 发布
- 2003-01
- 实施
- 2003-01-01
